Is LO-75 still functioning? Any information would be appreciated.
--
Dave Marthouse N2AAM
dmartho...@gmail.com
___
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership.
you already have dialup permissions...
73 de CO7WT
- Mensaje original -
De: Richard Lawn mailto:rjl...@gmail.com>>
Para: Amsat BB mailto:amsat-bb@amsat.org>>
Enviado: Fri, 20 Jun 2014 17:41:24 -0400 (CDT)
Asunto: [amsat-bb] Question for Gpredict Use
It's not that difficult. I'm going to CC the 'bb on this so anybody else
facing the same problem can use this. Also, they should be almost drop-in
compatible, but I ran all of this on a Linux Mint install, not Ubuntu. Mint
(IMHO) is a little more friendlier than Ubuntu, but is a direct fork of
Ubun
I'm new to using Ubuntu-Linux. I finally with a lot of outside counciling
got FlDigi to run using either Hamlib or Flrig to handle CAT on my FT-847.
I thought I was home free until I found that Gpredict would not control CAT
on the radio. What am I doing wrong? Can anyone help? Linux is my only
res
Regarding axial-mode helix antennas, what happens if you build a helix
for each of two different bands (like 2M/70cm), and mount them
concentrically, on the same backplane?
--
Gus 8P6SM
The Easternmost Isle
___
Sent via AMSAT-BB@amsat.org. Opinions exp
Hello,
About the future HamTV experiment, is it possible to use a cheap RTL DVB-T
dongles used or RTLSDR to receive such signals with proper LNA and
downconverter. If the downconversion fits the signal on a proper channel does
it device is capable of decode the transmitted format???
Thanks,
R
What is the frequency of the Estonian Satellite that was launched today and
where can the keps be found?
Dave Marthouse N2AAM
dmartho...@gmail.com
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Jo
Hi All,
It is "said that" NiCad battery cells usually fail to "short circuit" and
that Lithium Ion ones usually fail by just loosing their ability to hold a
charge viz they go "open circuit"
Is this true or?
many thanks
Graham
G3VZV
___
Se
Hi, What's the modulation for recieving the Montana University Explorer-1
Prime satelite, FM, USB???
Any info will be very appreciate as I would like to try to recieve it.
Also if any one has the latest keplers or know if finally it has or not
its own catalogue number.
Regards,
Raydel, CM2ESP
---
*Hi All,
Was wondering how the "Weekend Symposium" went?
Also, downloaded a software program call "HamSphere"
thru "Echo-Link" (Home Page) & was wondering if it does the same
things as"Echo-Link"?73,.Stu (WA2BSS)
*
___
Sent via AMSAT-B
*Hi All,
Was wondering if the Weekend Symposium is going to either
be webcast, or on Echo Link?
Hope everyone has a wonderful "All Hallow Eve", & don't
forget to "Fall Back" on sunday 6 Nov.
73,.Stu (WA2BSS)
PS We here in Eastern NY, have had our 2011 v
Hello all,
Just a little question. Is the Prospero downlink active only after
recieved command from ground station or it should be active world wide? I
would like to try recieve any signal but not sure if it will be
transmitting over Cuba and the Caribbean.
Thanks,
Raydel, CM2ESP
*Hi All,
Was looking on the "arissat1.org" & tried to download the
arissat1 Software, & was wondering how do I do that?
I have a Kenwood TS-2000 (no 1.2GHz option), & have the
Computer cable going from the Kenwood terminating @
the USB (4 port hub), & when I plugged the USB port plug
into the Compu
Hi All:I observed the Space Station pass over this location(Hopkinton,RI) a
couple of nights ago.The sky was relatively clear at the time.However,I
observed a slight wobble( >.05 degrees ) as it passed from NNW to SSE.I have
observed multiple Space Shuttle passes and I have never observed any wo
I want to use a single coax for three rigs, feeding to three antennas.
Rig 1 = 6 meters
Rig 2 = 2 meters
Rig 3 = 70 cm
Each has its own antenna at the remote tower.
Question #1: I should use a triplexer at the shack where the three antennas
combine to the single coax, and a triplexer at the ant
*Hi all,
I didn't get to print up the Announcement of this yr's. AMSAT-NA
Symposiunm Hotel, & address (San Jose,CA)is , & was wondering if it
could beE-Mailed to me (& I know the date in Nov.)
I got to see some of the live video from "w5kub.com @ Dayton
& it as facinating, (Interview w/ astronaut)
Hello all,
Can someone tell what is better for satellite work, the Kenwood TS-2000X or
the Icom IC- 9100 ??
Best regards
Andrew
HK4MKE
_
http://astroretiro.260mb.com/
algavi...@une.net.co
___
Sent via AM
I am adding UHF and VHF preamps to my Satellite setup and I am trying to
make sure I know the right order of components...
Here is what I think is right for VHF:
FT-847 --> VHF AMP --> SWR Meter --> SEQUENCER --> PREAMP --> Antenna
Is that right or does the SEQUENCER go before the AMP?
For U
*Hi all,
was wondering what mode both AO-51 & the ISS are in?
Also, the Mt. Beacon ARC Hamfeste was a smashing sccess
no rain, & abt. 18 people who passed evams, w/ 11 new Techs!
Am Hopeing to make the AMSAT weekend Symposium This Yr,
in Calif., & will more than likely take Amtrak out!
Hope everyon
*Hi all,
Was wondering when, & where this yr's AMSAT Weekend Symposium is going to
be?
73,.Stu (WA2BSS)
*
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA mem
I have question about ICOM- IC 910 H.
1. I want to receive beacon signals of some amsat satellites. Could you
please tell me from which satellites I can receive beacon signal? (So-50,
so-67, ao-27, ao-16, ao-51, prism. Kks, and etc)
All the equipments are prepared. There is also unitrac with ico
Dear Amsat Members.
I have read the KO6TH webpage at" http://home.wavecable.com/~ko6th/";.
This was very useful for me. Thanks you for publishing such information with
clear pictures.
I have question about the whole setup. "70cm antenna, 2.4ghz dish, rotor in
the middle, tower cam in small box,
Dear amsat members.
I have question about reciveing analouge signals from satellites in S- band.
In amsat webpage there is only ao-51, is there any other satellite or not?
another question is about ao-51, for receiving from ao-51 in s-band which
technical specification of antenna is need? Is there
*Hi all,
Haven't read any mention of any "Demo"satillite sta. @ the
New england Div. conv. (Or "Boxboro"), & was wondering if there is one?
73,.Stu
(WA2BSS)
*
___
Sent via amsat...@amsat
*I was reading (BB) abt the Kenwood TS-2000,
& was wondering is the TS-2000 VHF (Dual band/All mode,
& i gather it can be interfaced w/ SatPC32?
Is it like the Kenwood TM-255A or the TM-731A?
(Which can' t be directly interfaced w/ the computer)
Will be looking for replies! 73,.Stu
*
__
Hi : I sent a couple friends that are interested to the AMSAT
website.
I told them to look at all the satellites.
They found the site had all satellites on it.
When they brought up the sats they didn,t put on the
*Hi all, & Happy Easter/Passover,
Does anyone have info on how to put a Kenwood TM-255A &a TM-731A
for use on the Satillites?
Also was wondering if someone can make me a CD of "Ham Radio Deluxe"?
I can't seem to be able to download the software from their home page,
& my s-mail adddress is good in
Who can help me with the following setup:
I trying the combination of FT-847, WISP and TNC3S to work together.
For satellite guidance I use SatPC32 (Doppler and Rotor controle)
I've connected the TNC3S via the Packet connector to the FT-847
When I try to connect for example HO-68 using WISP. I
*Hi all, Was wondering if AMSAT is going to be @ the Atlantic Division
Conv.
(June 5;Saturday)(In Rochester,NY)?
The reason I ask is, I know that I won't be @ "Dayton Hamvention"
but want to go back to Rochester after a long absense!
73,.Stu (WA2BSS
When footprints cover multiple countries at the same time, do you speak
English, or local language to stations in your country?
Elan - WB2IOL
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now t
What sat is on 435.770 MHz transmitting 400 baud psk . I copied a sat with
Doppler at 19:20 Z today. I am located in Louisiana USA I and I don't know
what sat it is?
Merry Christmas
nick
___
Sent via amsat...@amsat.org. Opinions expressed are th
Hi AMSATs,
After many work on my transponder design I decided to put some work in
extending my lab.
One of the things I liked to have is a vacuum test chamber, to test electronics
under vacuum conditions.
I have looked around and I see all kind of classes of vacuum pumps, and their
equal incre
I have a log periodic covering 50mhz to 1.3ghz. 360 rotation w/no
obstructions,55ft up on tower. If I put a duplexer on feed line using a
2000x would this be suitable to work VO-52??? Thanks George
___
Sent via amsat...@amsat.org. Opinions expresse
I have been reading the messages regarding the Indian heo satellite. What
exactly are the Itar rules? Please fill me in.
Dave Marthouse N2AAM
dm...@pure.net
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA
is ECHO AO-51 operational at this moment?
_
HotmailĀ® has a new way to see what's up with your friends.
http://windowslive.com/Tutorial/Hotmail/WhatsNew?ocid=TXT_TAGLM_WL_HM_Tutorial_WhatsNew1_052009
___
Okay, time for my stupid question of the week.
Why are our sats so low powered? Why don't we have better batteries, solar
power systems, or generators?
Seems our sats are so low powered they require extraordinary measures to
receive.
Is this an accurate perception?
Dave
_
I am working on some a couple of the "Cheap" antennas by WA5VJB, that have been
talked about on here.
I am building these for Field Day and th use for some moble work on AO-51 &
AO-27 after that.
My question is this, Is the "J" /DE element centered in line with the others or
is just the long sid
37 matches
Mail list logo