Hi Jim, SATPC32 will run the FT736r directly using a serial port or a
USB/Serial adapter to the 6 pin DIN CAT port on the radio. However, the
cable must include a TTL/Serial converter. Page 13 of my FT736r manual
using GND, S.IN only If you are already running directly from PC to Radio
with the
t.org] On Behalf Of Alan VE4YZ
> Sent: October 26, 2009 9:56 PM
> To: 'Jim Bennett'
> Cc: 'Amsat-BB'
> Subject: [amsat-bb] Re: SatPC32, Yaesu FT-736, and KCT
>
> Hi Jim, SATPC32 will run the FT736r directly using a serial
> port or a USB/Serial adapter t
Hello Jim,
as Alan, VE4YZ, wrote already you can run the FT-736R with SatPC32 directly
at a serial port of the PC. You need a CAT interface for level conversion
RS-232 > TTL. In the sub folder KCT in the SatPC32 program folder you will
find a schematic of an interface that can easily be built by yo
Alan and Erich,
Thanks for the replies. I really appreciate it. It is good to know that
there is someone or some ones out there that are ready to help when asked.
So, if I read correctly, I should be able to use my KCT to tune the radio
along with the rotors. With no other cables other than wh
