Hi Clint and James,
I've got a full write-up on my 2 x FT-817ND system with SatPC32 on my page at:
http://kb5wia.blogspot.com/2010/10/satellite-portable-station.html
It includes details configuation, screenshot, cables, setup, etc.
Same config will apply to an 817+857 install.
73 de Dave KB5WIA
GREAT info - MANY thanks!
Clint, K6LCS
On Feb 10, 2011, at 11:21 AM, David Palmer wrote:
Hi Clint and James,
I've got a full write-up on my 2 x FT-817ND system with SatPC32 on my page at:
http://kb5wia.blogspot.com/2010/10/satellite-portable-station.html
___
Question I have is, is it possible to use SatPC32 to control 1 FT-817 either
in split frequency or in each VFO (ie switching between VFO A & B) with the
Doppler shift corrections? At this time my FT-817 is my only 2m/70cm rig
that supports SSB and I would like to be able to operate on the linear bi
On 2/10/2011 2:21 PM, David Palmer wrote:
> Hi Clint and James,
>
> I've got a full write-up on my 2 x FT-817ND system with SatPC32 on my page at:
>
> http://kb5wia.blogspot.com/2010/10/satellite-portable-station.html
>
> It includes details configuation, screenshot, cables, setup, etc.
> Same conf
Sure can, I've done it before switching to the twin radios. If you
only configure one radio with SatPC32, it uses the "SPLIT" fuction of
the FT8x7 to automatically set both the RX and TX frequencies for
doppler on VFOs A & B.
Remember that a critical factor for operating on the linear birds is
ca
:49 PM
Subject: [amsat-bb] Re: SatPC32 - FT-817
Question I have is, is it possible to use SatPC32 to control 1 FT-817 either
in split frequency or in each VFO (ie switching between VFO A & B) with the
Doppler shift corrections? At this time my FT-817 is my only 2m/70cm rig
that supports SSB a
Very well done
But am I mistaken about the Diamond MX72H
Is that not that actually a diplexer
Thanks
Howard
- Original Message -
From: "Andrew Glasbrenner"
To: "David Palmer"
Cc: "AMSAT BB" ; "Ed LONG"
Sent: Thursday, February 10, 2011 1:54 PM
I will have to look at that for running my FT-817 with my K3+144/28
transverter.
Thanks,
Ed - KL7UW
At 10:21 AM 2/10/2011, David Palmer wrote:
>Hi Clint and James,
>
>I've got a full write-up on my 2 x FT-817ND system with SatPC32 on my page at:
>
>http://kb5wia.blogspot.com/2010/10/satellite-p
At 10:25 AM 2/10/2011, Clint Bradford wrote:
>GREAT info - MANY thanks!
>
>Clint, K6LCS
>
>On Feb 10, 2011, at 11:21 AM, David Palmer wrote:
>
>Hi Clint and James,
>
>I've got a full write-up on my 2 x FT-817ND system with SatPC32 on my page at:
>
>http://kb5wia.blogspot.com/2010/10/satellite-porta
Hi Ed,
Sure -- SatPC32 runs both tracking and tuning just fine. I don't list
it in my article (referenced earlier) but other sections of my blog
show how I've connected up a G5500 rotator. Having SatPC32 controll
both the dopper tuning and the tracking is awesome -- it's a great
program, well wo
10 matches
Mail list logo