Unfortunately, 70cm UHF doesn't lend itself to unattended SatGate
operations like 2m VHF does. I tried catching the ISS on UHF and only
managed to hear, but not decode, one packet burst. I can't imagine
anything short of a full satellite station with automatic
azimuth/elevation control would
Unfortunately, 70cm UHF doesn't lend itself to unattended
SatGate operations like 2m VHF does. I tried catching the
ISS on UHF and only managed to hear, but not decode, one
packet burst. I can't imagine anything short of a full
satellite station with automatic azimuth/elevation control
Hi Bob,
I could easily set up an Igate, but every time I've looked into it I've been
turned off by the complexity of the software setup. Is there a one program,
easy to configure solution? Audio in would be best, but tnc decode is ok as
well.
73, Drew KO4MA
Sent from my iPhone
On Jul 10,
.
George, KA3HSW
- Original Message
From: Andrew Glasbrenner glasbren...@mindspring.com
To: Bob Bruninga bruni...@usna.edu
Cc: amsat-bb@amsat.org amsat-bb@amsat.org
Sent: Tue, July 10, 2012 3:06:29 PM
Subject: [amsat-bb] Re: aprs iss freq: is there anyone out there? UHF works!
Hi
: amsat-bb@amsat.orgamsat-bb@amsat.org
Sent: Tue, July 10, 2012 3:06:29 PM
Subject: [amsat-bb] Re: aprs iss freq: is there anyone out there? UHF works!
Hi Bob,
I could easily set up an Igate, but every time I've looked into it I've been
turned off by the complexity of the software setup
Drew,
I use UISS with the Sat gate add on and AGWPE. Quick easy setup.
Dave - KB1PVH
Sent from my Verizon Wireless DROID X
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the
Hi all,
Here's my plan. There will be two stations, one in Lima and one mobile
(me). As I'll be within 250 miles of Lima, Peru, If I beacon the ISS
near apogee, the unattended ground station in Lima SHOULD capture it,
provided it is set to the center frequency.
The tnc's will be byonics tt4's.
The easiest software I've seen to set up for iGating is APRSIS/32
(Lynn's software). iGate is enabled by default, and you just need to
tell it what port to use for the radio (external KISS TNC is easiest)
and what server on the Internet side. Done.
Greg KO6TH
Andrew Glasbrenner wrote:
Hi