When I just updated to the newer version of ASSP (version 1.99 13190)
and ran my usual connection tests, I noticed interesting behavior.
Usually I test internal and external travel after an update by sending
an email from mydomain to mydomain and an external account, and then
sending from the e
Keep seeing this in the log just before assp dies
Terminating ASSP: mainloop exception: Undefined subroutine &main::de8
called at D:\ASSP\assp.pl line 14366.;
any help?
--
Live Security Virtual Conference
Exclusive liv
Just updated to the latest 1.x (ASSP 1.9.3.5 1.0.02) and had a mainloop
timeout occur. ASSP shutdown on me. Restarted the service, and went
looking through the config. Noticed the AutomaticRestartAfterTimeOut
setting that mentions in needs the AutoRestartCmd set to work. I also
have the AutoRes
Ok, not sure what happened, but traffic is flowing through. Someone
must've applied the bigger hammer theory.
On 1/12/2012 5:23 AM, PMW Troy wrote:
> Was using 1.9.2.2 (1.0.02), updated to 1.9.2.5 and had this problem,
> went back to the 1.9.2.2 and previously saved config, but the
Was using 1.9.2.2 (1.0.02), updated to 1.9.2.5 and had this problem,
went back to the 1.9.2.2 and previously saved config, but the problem is
still there
Having a problem with receiving mail from Hotmail & Google accounts.
Everytime I try to send a test mail from my accounts outside, I receive
a
I thought of that, but I didn't pursue it because I thought ASSP
receiving the data would be the signal that their server had completed
the send.
I thought that the flow went THEM->INTERNET->ASSP->ME (Mailserver)
with ASSP getting the email, signalling it had been received, scanning
the mail, t
resending, with
> the same result until the sender gave up.
>
> I believe it was because of the SSL problems in version 1. I basically
> gave up with Version 1 and upgraded to ASSP Version 2 and touch wood
> haven't noticed the problem since.
>
> Hope that helps
>
>
Ok, guess I hadn't noticed the difference in sizes on the other mails.
Is there a setting you'd suggest to point me more toward what could be
causing the problem? I didn't see a verbose log of the entire smtp
conversation..
I suspect that the finalization of the smtp session is not happening,
The last couple days I've had an e-mail continually resent from a
company we do business with. Finally getting a chance to dig into it, I
found this in the log file.
-LOG SNIPIT-
2011-Oct-21 08:28:28 31920-00024 213.199.154.205
to: u...@mydomain.com Whitelisted sender Domain: t
Updated to 1.8.5.9 (1.1.01) script this morning. Win2K3 run as service.
On restart, the script failed to start up, manually starting the service
failed also. Rolled back to 1.8.5.9 (1.0.01) and everything is good.
--
W
nts mailed on schedule.
On 4/18/2011 6:34 AM, PMW Troy wrote:
> Just noticed this recently, but the block report doesn't show the e-mail
> box that it's displaying results for, instead i
Just noticed this recently, but the block report doesn't show the e-mail
box that it's displaying results for, instead it's blank(0), 1, 2, 3, etc.
--
Benefiting from Server Virtualization: Beyond Initial Workload
Cons
When I looked at it in the web GUI, it had the SSL module as blank
version, not installed. When I went to the server and checked the
package manager for perl, it had it listed with whatever version was
packed in the ASSP set. It listed a newer version (1.32) which I
installed. Then restarted AS
This morning I saw the new download for ASSP and when I installed it,
the log said that the SSL module for perl was not installed. I figured
it was looking for an updated module (there's a 1.32 available, I think
I had a 1.22 version installed) so I updated it, and restart the ASSP
and I get th
Apparently ASSPv2 has more robust SSL support, and is *highly*
recommended by Fritz if you use SSL
I use v1 with SSL and it hasn't been a big problem (usually), but I work
in a small company
On 4/5/2011 2:22 PM, Paul Houlbrooke wrote:
> SMTP Secure Listen Port (listenPortSSL)
>
> The port numb
Updated to the new version this morning and when I try to send messages
via SSL port, I get an error message about not connecting to the server
Didn't have this problem in 1.8.5.7 (1.1.05), but when I tried to roll
back, could not connect again. Settings on the mail server haven't changed
Noticed
es to save the grief?
Thanks
On 3/8/2011 7:14 AM, PMW-Troy wrote:
> Updated ASSP to 1.8.5.5 (1.0.01) from 1.0.00 and the day after, had a
> Block Report as normal, but then all the block reports would say No
> blocked emails to report.
> Flipped back to 1.0.00 today, will see if there&
Updated ASSP to 1.8.5.5 (1.0.01) from 1.0.00 and the day after, had a
Block Report as normal, but then all the block reports would say No
blocked emails to report.
Flipped back to 1.0.00 today, will see if there's a report in the next
couple days.
--
Since the 1.8.5.4 stables have come down, I've had problems with the
notification e-mails ASSP sends out. Everything with the exception of
the rebuild script report and the block report has had what looks like
UTF-8 encoding enabled.
The subjects don't show up on my e-mail list (though opening
I'll mention that I had a similar bug, in reverse, where .gov is on the
whitelist (which I believe is supposed to match from the end of the
e-mail address?) and a piece of spam got through with an address of
someth...@something.gov.xx (country code I believe)
On 12/15/2010 2:30 PM, Doug Lytle
Is it the correct version of Zlib? I have a vague memory of putting a
newer version of a module than the listed in and it didn't find it
correctly or something.
On 9/24/2010 5:33 AM, Spyros Tsiolis wrote:
> Hello again,
>
> I installed a testbed for ASSP v1.7.5.7 with a 32-bit CentOS
> v5.5 inst
Steve,
I'm using ASSP 1.7.5.7(1.0.07)
I've been using SSL on port 465 in ASSP since 1.6 somthing (I think)
Maybe I can help check setup.
I will mention that there was a problem getting mail to go through ASSP
to the mail program on SSL port.
I'm running on Windows 2003 R2 with hMailServer.
O
I moved to ASSP 1.7.5.7(1.0.06) and rebuildspamdb 2.7.5.8(1.0.02) and
ever since, my block report has only come in as text. My email client is
set to read those in HTML format, and the ASSP setting should be sending
in both text and HTML format.
Also, for a while I've had problems with the repl
When I send a spam report to the mail interface
(report-s...@mydomain.com) I receive 2 replies. One for the
administrator and one for the user submitting a spam report.
The administrator report seems normal, but the user report is blank.
It used to reply "Thank You For Reporting", however now
Fritz & Co.
I've noticed that my e-mail notifications (specifically the error
notification) seems to trigger on anything that has the pattern
"*error*" it. This includes e-mail addresses that have the letters error
in order in it.
Not sure if there is a way to just catch the error that ASSP
I previously reported the bug where I'd receive the daily block report
and it would say no report, but running a request from the block address
for a specific length of time would give a result
It's doing that again. This morning (23rd) it sent a block report saying
nothing was blocked, reques
This is a little off topic, but I'm trying to start using ClamAV
Currently I have Perl 5.10 and ClamAV module 1.8 on Win2003
When I've pulled down ClamAV 1.91 from CPAN and tried to make the
makefile, it does not detect my ClamWin setup and wants to install MinGW
Does anyone have a repo that lists
1.7.5.4 (1.0.00) seems to have fixed the bug
Thank you
On 6/8/2010 7:19 AM, PMW-Troy wrote:
> Currently using ASSP 1.7.5.3 (1.0.00)
> Have BlockReportFile set to run nightly and show me reports for the last day
> Put 1.7.5.3 in on Friday
> Since then, the block report has been showin
Currently using ASSP 1.7.5.3 (1.0.00)
Have BlockReportFile set to run nightly and show me reports for the last day
Put 1.7.5.3 in on Friday
Since then, the block report has been showing no blocked mail
When I came in on Monday I ran a report for 14 days by e-mailing the
block address and a report
This morning I had a block report with a client's e-mail on it
When I tried to send it from the block report, the log said it couldn't
send data
When I looked at the e-mail headers, I saw a hit about PB (20) and no
entry for the total score
If it was only 20, that is way below our minimum value a
Cool
I've never seen those kinds of times
It's always been in-between usually anywhere from :05-:35
I guessed there was a randomizer in there somewhere, my bad
Is there a reason it might be hitting at several times during the hour?
I"m going to keep it on windows scheduled tonight to see if it happ
Ok, further problems
I've got it set for 2 (which was the original run time from the
scheduled tasks) and I'm still getting multiple reports. They are
definately seperate run events too.
For examples:
Saturday I received 5 RebuildSpamDB - report emails between 2:25-2:44 am
local
Each had a diffe
I was looking through the block list and it's reporting an address from
the whitelist. In fact, this address should be covered by at least two
whitelist entries, one for the domain and one for the individual. As of
right now I'm almost positive the address isn't on any of the other
lists (no pr
ng to have the script run twice, but it is
unusual and thought I'd point it out
If there's a suggestion that it's a setting I have that needs to be
fixed, I'm happy to check
Thanks for this system by the way
Later
On 5/18/2010 7:36 AM, PMW-Troy wrote:
> Just moved to t
Just moved to the new ASSP with this RebuildSpam script
First run last night was scheduled in the GUI for 24 (midnight)
Received a full report at 12:09am (roughly as expected)
Then recieved a report at 12:11am which seems to be the last half of the
report (starting in the middle of the section of
You probably don't have to start over from scratch, just fix your
corupus (or if that looks like it's impossible, start over)
I'd also suggest reviewing the "Getting Started" section on the wiki
(http://sourceforge.net/apps/mediawiki/assp/index.php?title=Getting_Started)
Later
On 4/23/2010 10:5
Please tell me you've been sorting them during the three weeks?
In all honesty, I check the logs, block report, and spam/not spam
folders almost daily to make sure the mails are sorting correctly. I'd
highly suggest this for the initial setup of ASSP.
AFAIK the only way to deal with it is to man
Thanks Fritz
I'll cycle it in later today
On 4/7/2010 9:02 AM, Fritz Borgstedt wrote:
> That is a bug in V1, please try:
> http://www.magicvillage.de/~Fritz_Borgstedt/assp/S06DDE9A5?WasRead=1
>
>
> --
> Download Intel® Pa
Hey
I've got my NotifyRe file set to report all the options and the Notify
e-mail set to the same e-mail as my rebuild reports and block reports
I'm not receiving notifications.
I'm receiving the Rebuild Reports and Block Reports with no problems,
but not change notifications
Could anyone help?
Hey
For general information, I'd suggest poking around the wiki/forums on
http://assp.sourceforge.net/
Watching the mailing lists is also a good idea.
Ask specific questions if you have them, though without using the
software, you're probably better off just lurking and seeing what
everyone else
ng ASSP 1.7.1.2(1.0.04)
On 3/27/2010 10:20 PM, PMW-Troy wrote:
> Just moved the ASSP and e-mail over to a new server
> Had already installed the same ASSP version and Perl modules as the old
> server
> Copied the old server ASSP folder over to the new server
> Now SSL doesn't
Just moved the ASSP and e-mail over to a new server
Had already installed the same ASSP version and Perl modules as the old
server
Copied the old server ASSP folder over to the new server
Now SSL doesn't work
Did work on the old server, hadn't changed any settings
I suspect I missed something whe
Never mind. Found the address.
On 3/22/2010 7:09 AM, PMW-Troy wrote:
> File rebuildrun.txt follows:
>
> **
> RebuildSpamDB 2.7.1.0 (1.0.01) started - Mon Mar 22 02:00:03 2010
>
>
>
> Processing...
> removing x1.eml
File rebuildrun.txt follows:
**
RebuildSpamDB 2.7.1.0 (1.0.01) started - Mon Mar 22 02:00:03 2010
Processing...
removing x1.eml -- 'nonu...@good-domain.com' is in Whitelist
removing x2.eml -- 'nonu...@good-domain.com' is in Whitelist
removin
Scott,
AFAIK, you cannot determine the release state based on the version
number. I'll yield to any of the developers, but I believe the latest
release at SourceForge is the latest stable release regardless of
version number. In this case, 1.7.1.1 is the latest stable release.
For the latest d
Here's a site with a RegEx tester.
http://regexlib.com/RETester.aspx
I had a different one, but I can't find it anymore.
On 3/5/2010 9:07 AM, Paul K. Dickson wrote:
> Does anyone have a regex to match a blank subject or a subject with just
> ³Subject: re²? Trying to avoid catching subjects with
Yep, signed into my sourceforge account and when I went to find a
"compose" or "new" I couldn't find anything
Went to the page I saw and tried "edit" (or something) and it said that
editing was limited to admin and editors
Didn't know who all that was, so post.
:)
Thanks for the help btw.
text
Ok, from the limited adventures I had with SSL, I said I'd make
something for the ASSP wiki and I've got the post in txt format, but
when I go to the wiki to actually put it up, I'm not allowed.
Who do I need to pass this on to to get it posted?
Found a nice section in "HOWTOs and notes for speci
I'm trying to remember where I was reading, but there's 2 different
"from" fields on e-mails, an external (I think it's envelope from) and
an internal (which I believe is the From that we see in the e-mail) and
the two aren't required to be the same value. I vaguely recall hitting
this issue at
I think with later versions of 1.5 and all the 1.6 it's recommended to
use Perl 5.10
Though if you have a windows machine, look for the perl508.dll file also.
On 2/2/2010 8:28 AM, Paul K. Dickson wrote:
> Is it still 5.8 or is it now 5.10?
>
>
> Paul K. Dickson
> Systems Administrator
> Frederick
Ok, if I'm guessing correctly, removing the entry in smtpDestinationSSL
causes ASSP to send the mail on the default smtpDestination port.
Which means it works, and ASSP gives a SSL connection to receive mail,
but forwards it to the mail server without the SSL part.
Am I on the right track?
On 1/
I'm not quite sure what you are getting to Fritz, but I erased
smtpDestinationSSL and tried again
It went through.
I'm kinda confused here.
On 1/29/2010 6:24 PM, Fritz Borgstedt wrote:
> programm...@pmw-wheeltracker.com schreibt:
>
>> Setup listenPortSSL for 465 and have smtpDestinationSSL
I'm not using a beta for the new system
It [was] the latest stable 1.6.5.1
For the "get-er-up-and-running" system it's old 1.5.1.5
Is there an awk for windows?
Nevermind, found one.
On 2/1/2010 8:24 AM, GrayHat wrote:
>
>
>> Stunnel gives you one more set of logs to trudge through, makng
>>
Fritz,
The machine up and running now has 1.5.1.5 on it. It's getting replaced
soon, but it's in place now and I'd rather go through changing the perl
version (I posted wrong, the current Perl on it is 5.08), and resetting
up ASSP on it. The new system has 1.6 on it and I'll be grabbing the
whi
Right now we use ASSP v1, and it's done ok.
I'm trying to get SSL working and it's not so promising.
What I've been reading suggests that ASSP v2 is better for this
Is there someone out there with a good tutorial on how to get SSL
working on in a Windows 2003/Perl 5.10/ASSP 1.5/hMailServer setup
Block Reports
*...@your-domain.com=>y...@your-domain.com=>1
single days worth of blocked stuff
(this is also going to depend on your collection numbers I think)
Then again, this may not be what you're wanting. If not, sorry.
:)
On 12/20/2009 6:50 PM, Jerry W. Powell wrote:
> Dose assp have a gui
Trying to set the DNSResponseLog checkbox, and it keeps saying "Invalid '1'"
Any clues?
--
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development suppo
Hey.
Been using 1.5.1.5 (0.3.12) for a while and it's done fine up till a few
days ago. It stopped mailing me the rebuildspamdb report. I logged on to
the server and ran it normally, and it seemed to execute fine (except
for not mailing me again). Today I went through the web interface to
read
Hey,
On our domain, we use the e-mail interface through assp. Specifically
the report spam and report ham addresses
The flow goes like this
E-mail client => ASSP => MTA => Internet
when we forward a spam to "reportspam@" ASSP catches it and sends back
the "We got your report" e-mail.
It doesn't
I believe, by default, ASSP adds anyone you mail sent out through it to
the whitelist. No config needed.
shacky wrote:
> Hi.
>
> I'm using ASSP 1.5.1.1, I configured the relaying features and I can
> send e-mails through ASSP without any problem.
> I realized that I don't have the whitelist file
Hey guys, I'm having a bit of a time finding the packages for 1.5 in the
repositories
From PPM (Windows ActivePerl 5.08)
Repositories:
-ActiveState Package Repository
-University of Winnipeg
-Roth.net
-Trouchelle.com
-TCool
-Bribes
Packages I'm having trouble finding (from Fritz install.txt fil
Thanks Fritz.
Fritz Borgstedt wrote:
> Questions and Answers for users of ASSP Anti-Spam SMTP Proxy
> schreibt:
>
>> Hey guys. I'm looking through my logs and spam, and I'm noticing an
>> address user name that doesn't exist for us, but pops up pretty
>> regularly on the spam mails (I'd gue
Ok, I guess I'm just nutty.
ASSP is dropping the invalid local address, I just kept seeing the three
or four entries that had PB scores.
This is why you shouldn't read logs when you're cross-eyed from sleep.
On 3/20/2009 2:50 PM, Charles Marcus wrote:
> On 3/20/2009 3:32
ses) kinda
looks like what I'm wanting, but I'm not really wanting to bounce them
(since it seems spammers like this address), but just drop them before
going through processing.
On 3/20/2009 2:50 PM, Charles Marcus wrote:
> On 3/20/2009 3:32 PM, PMW-Troy wrote:
>> Hey guys. I&
Hey guys. I'm looking through my logs and spam, and I'm noticing an
address user name that doesn't exist for us, but pops up pretty
regularly on the spam mails (I'd guess at least 1/8 of the spam I see
daily). I'm wanting to add it to a list that tells ASSP "mail to this
user is spam, just drop
Yep. Already seeing my favorite form of written entertainment.
Yes, I'm a sick person to enjoy spam...but sometimes it's so hilarious.
Anyway, already picked up about 10 pieces since the new config file.
Have no idea what I pouched, but that's the thing.
Fritz, I think I found an bad initializatio
That's what I wound up doing.
Copied the defaults file from the install zip and modified it to have my
addresses (and start as service)
Right now I'm going through to make sure the settings for addresses and
aliases are correct. Everything else is default.
Going to check the spam folder after
Fritz,
I am using the defaults (except at the bysian because when I first set
this up they were a little off, and I had to adjust them) I believe they
were at 30 low and 50 high. This morning I took the high down to 40 to
make sure some of the values from the log would be marked.
I'm not wantin
I switched off both allTestMode and switchTestToScoring yesterday. The
log entries marked Mar 5 should represent what's going on with those off.
Like I stated originally, the boss came up and was upset that he was
receiving phone calls about e-mails he never received.
This is unusual, so I turned
Ok, here's all the hits for spam found between 2/27 (the last date of
spam in the spam folder) and now
Mar-1-09 01:16:56 [MessageLimit][lowlimit] 195.27.237.122
to: us...@pmw-wheeltracker.com [spam
found] and passing because messagescore(45) low [Service Support Topic
newsletter]
Mar-1-0
No, not really minding the lack of spam, except it's not a lack of spam :(
Don't even get the good stuff.
It's a lack of spam going into the corpus folder. Which, if I
understand, means eventually I'll have a bad corpus. No use. :(
On 3/4/2009 4:27 PM, Jeroen van Aart wro
Ok,
On the spamMSLog it's set at "spamfolder & sendAllSpam"
I do have fileLogging on.
Looking through the relevant logs, I've got some spam found
(example log post)
Mar-1-09 01:16:56 [MessageLimit][lowlimit] xxx.xxx.xxx.xxx
to: f...@pmw-wheeltracker.com [spam
found] and passing because messages
I'm using ASSP 1.4.3.1 (upgraded from 1.3) since the end of January
Around Feb 18th, there was a question about some mail not being
received, so I put the system in to testmode (using allTestMode &
switchTestToScoring) to check what was being marked as spam, regardless
of what the drop setting w
Hey, I'm using ASSP 1.4.3.1 and with the drop of the old wiki, the
blue-i buttons on the various topics don't take you to the references.
Didn't think of this till I just spent an hour tramping through the
config just recently, but it occurred to me that that may be a standard
address in one of
Fritz,
I'm not knocking what's there now. I was meaning what *was* available
when I first got ASSP and needed references. Once I got ASSP set up and
humming happily, I've only had to keep an eye on the corpus ratio and
adjust the collecting to keep her happy.
And looked at changes when I pulled
I'll chip in 2 pennies here.
I would've killed for a beginners manual when I first downloaded the
ASSP package. Spent a week just digging through the docs and what I
could find on the web and the old wiki (and I'm sorry, but I couldn't
use that thing half the time).
I'd suggest a beginner's manu
76 matches
Mail list logo
