[asterisk-users] Hardware Platform Recommendations for Digium Card Compatability

2007-08-10 Thread Jason K. Carter
Hi there, Could everyone that has a working production Asterisk server that uses a Digium telephony card as a BRI/PRI gateway let me know what motherboard/processor your server uses? We use a Digium TE210P as our telephony card. We have tried a couple motherboards, and neither is giving us sa

Re: [asterisk-users] Zaptel wct2xxp driver causes LEDs to go black and RED alarm

2007-06-21 Thread Jason K. Carter
The problem was with ACPI screwing up interrupt routing. Added pci=routeirq to /boot/grub/grub.conf to turn off acpi for interrupt routing. Now I've got two green LEDs. Thanks to Jolan Luff for figuring this out! Jason :) >> On Thu, 2007-06-21 at 09:34 -0500, Jason K. Carter wr

Re: [asterisk-users] Zaptel wct2xxp driver causes LEDs to go black and RED alarm

2007-06-21 Thread Jason K. Carter
Yes, both cards are jumpered for E1. Any other ideas? Jason :) James Texter wrote: > Have you checked to ensure the card in server #2 is jumpered for E1? > > On Thu, 2007-06-21 at 09:34 -0500, Jason K. Carter wrote: >> Hi there, >> >> I've got two Asteris

[asterisk-users] Zaptel wct2xxp driver causes LEDs to go black and RED alarm

2007-06-21 Thread Jason K. Carter
Hi there, I've got two Asterisk hosted PBX servers with Digium TE210P cards attached by a E1 cable to Port 1 on each. On startup, both cards flash red, alternating between ports 1 and 2. When server #1 loads the Zaptel module and drivers, Port 1 status LED goes green. When server #2 loads t