Thanks a lot Henk !
- Original Message -
From: "Henk Dick" <[EMAIL PROTECTED]>
To: "'Lincoln Zuljewic Silva'" <[EMAIL PROTECTED]>; "'Asterisk Users
Mailing List - Non-Commercial Discussion'"
Sent: Wednesday, November 22, 2006
gister channel '1-15'
Nov 22 15:11:43 WARNING[5524] loader.c: chan_zap.so: load_module failed,
returning -1
Nov 22 15:11:43 WARNING[5524] loader.c: Loading module chan_zap.so failed!
- Original Message -
From: Henk Dick
To: 'Lincoln Zuljewic Silva' ; 'As
Hello all. I have here a TE110P (configured as E1) and a TDM400P (with four
X100P - FXS). Both boards are recognized by the operating system as showed
above:
:08:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Unknown device b1d9:0003
Hello all. I'm having a little problem here with NAT, and I already read
a lot of documentation on web, but I still cant understand how to get
asterisk and "external (on internet)" sip clients connected.
Could anybody give me a tip ?
Thanks
Lincoln
_
It's a propretary hardware that is Telephony Server for a predictive
dialer. We would like to use asterisk as pbx of that hardware instead of
another pbx like avaya ou nortel...
Doug Lytle wrote:
Lincoln Zuljewic Silva wrote:
Yes, I saw that...I just don't know what do to an
Yes, I saw that...I just don't know what do to anymore. The framing and
protocol between machines are the same and the pri signaling is ok in
both machines.
Doug Lytle wrote:
Lincoln Zuljewic Silva wrote:
Its another pbx.
It looks like your setup between the PBX and the Asterisk b
Its another pbx.
Doug Lytle wrote:
Lincoln Zuljewic Silva wrote:
grep 4509 extensions.conf
exten => 4509,1,Dial(Zap/g1/4509)
Doug Lytle wrote:
Lincoln Zuljewic Silva wrote:
Where is your configuration for extension 4509?
I still don't know how you are hooking up extens
BR Thomas
Lincoln Zuljewic
Silva
<[EMAIL PROTECTED] To
grep 4509 extensions.conf
exten => 4509,1,Dial(Zap/g1/4509)
Doug Lytle wrote:
Lincoln Zuljewic Silva wrote:
Hello all. I have a Digium TE110P board and when I do a 'dial 4509' I
got:
Jul 24 11:44:33 NOTICE[8180]: app_dial.c:1049 dial_exec_full: Unable
to create channel
Hello all. I have a Digium TE110P board and when I do a 'dial 4509' I got:
Jul 24 11:44:33 NOTICE[8180]: app_dial.c:1049 dial_exec_full: Unable to
create channel of type 'Zap' (cause 34 - Circuit/channel congestion)
My zaptel.conf:
span=1,0,0,cas,hdb3,crc4
bchan=1-15,17-31
dchan=16
My zapata
Hello all. I have a Digium TE110P board and when I do a "zap show
status" on CLI I get:
DescriptionAlarms
IRQbpviolCRC4
Digium Wildcard TE110P T1/E1 Card 0OK00
0
IRQ = 0 ?
In lspci I h
Hello all. Im trying to make asterisk support MFCR2 here but Im getting
an error when I apply the patch:
patch <
channels_Makefile.patch
patching file Makefile
Hunk #1 succeeded at 75 with fuzz 1 (offset 12 lines).
Hunk #2 succeeded at 99 (offset 17 lines).
Hunk #3 FAILED at 166.
Hunk #4 FAILE
Hello all. I have a TE110P Digium board. Could I setup this board to
generate the clock to another equipment ?
Thanks
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http
incoln
Moises Silva wrote:
Are you sure the other end is configured properly?
What does "zttool" says?
Have you turned on all the asterisk debug messages to look further?
Regards
On 7/19/06, Lincoln Zuljewic Silva <[EMAIL PROTECTED]> wrote:
Hello all. I ha
Hello all. I have a Digitum TE110P board configured and working (I
think that it's working). When I configure in extensions.conf to a
extension route to that board I get "Unable to create channel of type
'Zap'" on log.
Here are some configuration:
lspci -vv
:01:07.0 Network controller: Ti
Hello all. I'm installing a Digium TE110P board on Asterisk to work
with a telephony hardware. The telephony hardware use ISDN and no-ISDN
but the Digium board only use ISDN.
My telephony hardware can use the folows ISDN protocols: n12, 4ess,
Sess, 4ess_tr, Sess_tr, net5, qsig, qsig_s, ntt
16 matches
Mail list logo