Hi,
I picked up a router with 8 voice ports that supports MGCP, but it has
several options that I am not familiar with or do not seem apparent in the
mgcp.conf.
Enter the default IP address for the Notified Entity: [0.0.0.0]
Enter the listening port of the Notified Entity: [2427]
Enter the IP add
Hello,
I'm just newbie and I'd like to ask you some newbie questions.
1. Can asterisk work as a call agent and media gateway in one (for example
with one fxo card in pc)
I assume when the answer is positive asterisk can work as a call agent alone
or media gateway alone.
2. Where can I find some ma
I haven’t found any recent information on this, but
can Asterisk act as a MGCP UserAgent?
Tim Jackson
Network Engineer
Angelina County, Texas
(936)639-4827x101 office
(936)414-6723 mobile
___
Asterisk-Users ma
Hi
I have asterisk 1.4
I want to make a MGCP trunk as a client to connect to a provider who is
using MGCP protocol, he provided me with user & password,
I tried a custom trunk:
MGCP/$outn...@user:passw...@66.152.163.106:4000
Not seems to help,
Any suggestions plz?
--
Hi.
I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk
with the next configuration files.
'--- extensions.conf
[general]
static=yes
writeprotect=yes
[globals]
ap1 => mgcp/aaln/[EMAIL PROTECTED]
[macro-ap
Hi List
I have one question about MGCP in asterisk. I have a media gateway, and I
want to have asterisk to work with the media gateway. As I was told that the
media gateway can communicate with the switch via standard interface
MGCP/ICGP. Question is if the asterisk MGCP supports such MGCP messa
Hey guys, the occam people are coming in Monday with boxes for us to
test, they are controlled via MGCP, I've never used MGCP with asterisk
(or ever) and haven't been able to find much info about them on the
list. My guestimate config is as follows, let me know if I'm on the
right track.
mgcp.conf
hi
anyone around that wants to write MGCP transfersfers in *?
I need it, and I really don't know too much C...
roy
--
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356
Computers are like air conditioners.
They stop working when you open Windows.
_
I strange error messages when using mgcp and ata186 .
This session is simply dial into 600 demo extension - echo test
...
Handling request 'NTFY' on aaln/[EMAIL PROTECTED]
Transmitting:
200 29 OK
to 10.0.1.19:2427
-- Endpoint 'aaln/[EMAIL PROTECTED]' observed '0'
-- MGCP Asked to indicat
I did not get any answers to my earlier posting. I hope I have better luck this
time- The question: Is it possible to use Asterisk as media gateway controller?
I know * supports MGCP, but does that also imply that I can use * to control any
third party media gateway (such as one providing media con
Hi all,
I have VOIP network built with MGCP endpoints.The
manufacturer of endpoints is ASKEY. I downloaded latest Asterisk software and
found it very useful for me. I configured it and it seems taht everything works
OK when I am testing it with one or two endpoints. After that I tried to
Hi,
For MGCP users. Is there any success stories with any MGCP IAD vendor.
IÂm trying to find an IAD which works with Asterisk. IÂve tried the
Cisco IAD 2430 without success; but SIP on this IAD works but itÂs
limited (no authentication, no notify messages, etc) and with higher
density IAD
Title: MGCP problem
The latest cvs mgcp code seems to be slightly broken. I have two gateways and both of them only report their ip address to * instead of a hostname. When I audit the endpoints, * properly places the ip address in brackets and the audit is successful. The phones connected
Title: MGCP Problem
Turns out this was a typo in my extensions.conf file all along. Many thanks to the person who pointed it out. The answer was staring me in the face the entire time, but I just couldn't see it. Apologies to all
I have read over the archives and am still a little confused about mgcp
support in asterisk.
I realize the mgcp channel is server side only (but jump in and correct me
if I got this wrong.)
I have seen a few references to sip<>mgcp interteroperability in patches,
so now I am wondering what the c
Pro's advise me on Installation and Configuration of Asterisk to support
Megaco (RFC 3015)
Clients.
Java
_
Is your PC infected? Get a FREE online computer virus scan from McAfee®
Security. http://clinic.mcafee.com/clinic/ibuy/campai
Does anyone know some free MGCP
softphone?
Nowadays I'm using one from eyeP Media, but it is
trial for 30 days and it's expiring...
Any ideas?
Thanks,
Leonardo
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.
I am looking into using a Cisco T1 device that uses MGCP. Asterisk is
talking to it fine, but I am having a hard time figuring out how to
handle channel grouping like Zap does. With Zap, I can take channels
1-23 and make a group g1 out of it and then simply dial Zap/g1. Does
MGCP have this t
Hi
1- Anybody implement mgcp useragent in *.
2- Where can i get that.
3- if no then anybody can help me to write it down.
Best Regards
Ibrar Ahmed
Project Manager.
Comcept (Pvt) Ltd. Islamabad Pakistan
www.com-cept.com
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Ph # (Off) +92-51-111784784
Ph # (Res) +
Hi:
I have installed a call center with 15 extensions. I used an E1 with
R2 signalling for incoming calls. The calls are received through
clarent cpg-101 (aka DLINK 104s). I have a lot of trouble with
transfers. Usually an extension receives the incoming calls from the
e1 then the call is transfer
Hey there,
I'm an asterisk newbie and have just joined this mailing list. I have
to use asterisk as a call agent that supports MGCP requests. I'm
reading the documentation from asteriskdocs and voip-info.org but
those cover more specifically only IAX and SIP configuration. I'd
really appreciate it
Hey there,
I'm an asterisk newbie and have just joined this mailing list. I have
to use asterisk as a call agent that supports MGCP requests. I'm
reading the documentation from asteriskdocs and voip-info.org but
those cover more specifically only IAX and SIP configuration. I'd
really appreciate it
Hello List,
I'm trying to setup MGCP channel with a Centile Media Hub box. My
Centile box has 4 ports and I got no dial tone. Can somebody help with
this isuue?
This is my mgcp.conf and extensions.conf
Thanks
Daniel.
; MGCP Configuration for Asterisk
;
[general]
port = 2427
bindaddr = 192.168.1
, 2004 2:48 PM
Subject: [Asterisk-Users] MGCP
I haven't found any recent information on this, but can Asterisk act as
a MGCP UserAgent?
Tim Jackson
Network Engineer
Angelina County, Texas
(936)639-4827x101
Any other ideas for interacting with an MGCP provider?
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Duane Cox
Sent: Tuesday, November 23, 2004 2:57 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] MGCP
>>> I haven't found any recent information on this, but can Asterisk
>>> act as a MGCP UserAgent?
>> I wish I was wrong, but I think right now MGCP in Asterisk is CallAgent
>> only.
>> http://www.voip-info.org/tiki-index.php?page=Asterisk%20MGCP%20channels
> Any other ideas for interacting with a
ewart
Nelson
Sent: Tuesday, November 23, 2004 11:55 PM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] MGCP
>>> I haven't found any recent information on this, but can Asterisk
>>> act as a MGCP UserAgent?
>> I wish I was wrong, but I think right now MGCP in Aste
Any example for configuring T1 PRI with Asterisk using a Cisco 2600 series router? MGCP config?
Do you Yahoo!?
All your favorites on one personal page Try My Yahoo!___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/li
Sirs,
According to RFC 2705 (MGCP), these are the parameters that are used in the
transactions:
ReturnCode,
Connection-parameters
<-- DeleteConnection(CallId,
EndpointId,
ConnectionId,
[Encaps
Hello,
I have noticed a little problem in chan_mgcp.so.
After a few unsuccessful attempts to call an endpoint using
MGCP/aaln/[EMAIL PROTECTED] I have noticed the following on the system running
asterisk using netstat.
udp50524 0 XX.XX.85.XX:2427 0.0.0.0:* 2666/asterisk
T
Hi,
i try to use asterisk together with a webstar mgcp cable modem. if i
configure the cable modem to act as a nuera v5.2 call agent it connects
to asterisk. but if i try to make a call the line will disabled.
in order to get a deeper look here comes the logs:
--snip--
voip*CLI>
MGCP read:
N
Hello everybody!
I have an Asterisk 1.2.12.1 server with SIP as the VoIP
protocol.
What I want to do: I want to talk to the “outside
world” via MGCP.
I suppose I must set an MGCP peer to route outgoing calls.
So, I must set the endpoint syntax of the Asterisk server (Asterisk
On Fri, Oct 29, 2010 at 4:21 AM, Baha @ SH wrote:
> Hi
> I have asterisk 1.4
> I want to make a MGCP trunk as a client to connect to a provider who is
> using MGCP protocol, he provided me with user & password,
>
> I tried a custom trunk:
>
> MGCP/$outn...@user:passw...@66.152.163.106:4000
>
> No
On Thu, Oct 28, 2010 at 9:54 PM, Steve Totaro <
stot...@totarotechnologies.com> wrote:
>
>
> On Fri, Oct 29, 2010 at 4:21 AM, Baha @ SH wrote:
>
>> Hi
>> I have asterisk 1.4
>> I want to make a MGCP trunk as a client to connect to a provider who is
>> using MGCP protocol, he provided me with user
Hi!
> I have asterisk 1.4
> I want to make a MGCP trunk as a client to connect to a provider who is
> using MGCP protocol, he provided me with user & password,
You will most probably need 1.8 for this, with 1.4 you will certainly not
be able to succed. Read more:
http://www.voip-info.org/wiki/v
Hi there,
from my logfile (with Swissvoice ip10 phones):
WARNING[23575]: chan_mgcp.c:847 mgcp_indicate: Don't know how to indicate
condition 14
Anyone has a clue as to what this means?
Cheers, Philipp
___
Asterisk-Users mailing list
[EMAIL PROTECTE
Hi,
> -Original Message-
> from 64.76.148.186:2427Verb: 'ntfy', Identifier: '6001', Endpoint:
> 'aaln/0/[EMAIL PROTECTED]', Version: 'MGCP 1.0'
> 3 headers, 0 lines
> Jan 22 18:05:11 NOTICE[49159]: chan_mgcp.c:1102
> find_subchannel: Gateway
> 'ap1' (and thus its endpoint 'aaln/0/0') doe
Hi.
Thanks for the tip. Now i'm able to recognize the endpoint MGCP. But i can
not place a call. I'm attaching the debug from the asterisk and two
configurations files (mgcp.conf and extension.conf). For my first test i
just want to call the voice mail, that has the 112 extension.
The debu
Hi,
Anyone knows if there is a MGCP media gateway implementation for
* ? The stock chan_mgcp.c seems to be a call agent implementation
only and reflected in mgcp.conf as such.
PK
- Original Message -
From: "Jeremy McNamara" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, Februa
Title: mgcp endpoint question
Hi,
I'm testing an mgcp phone with * 0.72. While * accepts the endpoint gateway enclosed in [ ], the phone baulks when presented with the gateway domain not enclosed in [ ], see below. Is there anything I can add to my mgcp.conf to force the inclusion of the [
Hello
I was just wondering if anyone was working on the "MGCP RELOAD"
functionality.
Thanks,
Duane Cox
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
Hi,
After spending some time trying to get a DG-104S working behind NAT,
I finally found the problem.
I made the incorrect assumption that nat=yes in mgcp.conf works just
like sip.conf. The channels within a gateway are treated more closely to
zap channels than sip channels (from
and G729 codecs. Have you tried
to use these codecs on the DG104S ??? Maybe we exchange some notes on this.
Ish
--__--__--
Message: 8
From: "Wade Weppler" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Wed, 30 Jul 2003 15:09:35 -0400
Subject: [Asterisk-Users] MGCP behin
onday, September 01, 2003 2:23 PM
Subject: [Asterisk-Users] MGCP question
>
>
> Hi List
>
> I have one question about MGCP in asterisk. I have a media gateway, and I
> want to have asterisk to work with the media gateway. As I was told that
the
> media gateway can communica
]>
Sent: Friday, March 14, 2003 6:39 AM
Subject: [Asterisk-Users] MGCP Config
> Hey guys, the occam people are coming in Monday with boxes for us to
> test, they are controlled via MGCP, I've never used MGCP with asterisk
> (or ever) and haven't been able to find much info about them
> This is what I have. In the MGCP box you have a few settings to deal with
> as well, of course. Currently MGCP is not functioning well. The "guys" are
> working on it. Right now, * will seg fault when you place station to
> station calls.
Already fixed in CVS as of this morninga ctually.
Ma
Roy Sigurd Karlsbakk wrote:
hi
anyone around that wants to write MGCP transfersfers in *?
I need it, and I really don't know too much C...
roy
I have same needs,
there is good phone dlink dph-100m but * has no transfer in mgcp channel ...
--
-
Best Regards,
Pavel Litvinenko.
On Wednesday 26 March 2003 16:59, Pavel Litvinenko wrote:
> I have same needs,
> there is good phone dlink dph-100m but * has no transfer in mgcp channel
are you using that phone? any problems? what software version?
--
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel:
Hello,
I have some MGCP VoIP gateways and some H323v2 VoIP gateways,
Can a use the Asterisk for interconnect the VoIP boxes?
If I can anyone knows how to configure it?
Thank you very much
Best regards
Sebastian Sill.
Uruguay.
___
Asterisk-U
When I connected over two mgcp channels and sending numerical
indication to cisco ata it seems hangup one channel (receving )
and generate 'fast busy' tone.
I hack chan_mgcp and my threewaycalling works ok!
But why indications are sent after I press hookflash on answering end?
--
Pavel Zheltouh
On Fri, 2003-07-11 at 08:42, Pavel Zheltouhov wrote:
> When I connected over two mgcp channels and sending numerical
> indication to cisco ata it seems hangup one channel (receving )
> and generate 'fast busy' tone.
> I hack chan_mgcp and my threewaycalling works ok!
>
> But why indications are
On Fri, 2003-07-11 at 06:28, Pavel Zheltouhov wrote:
> -- MGCP asked to indicate -1 'UNKNOWN' condition on channel
> MGCP/aaln/[EMAIL PROTECTED]
> -- MGCP Asked to indicate tone: on aaln/[EMAIL PROTECTED] in cxmode:
> sendrecv
> Posting Request:
> RQNT 308 aaln/[EMAIL PROTECTED] MGCP
Karl Putland wrote:
On Fri, 2003-07-11 at 08:42, Pavel Zheltouhov wrote:
When I connected over two mgcp channels and sending numerical
indication to cisco ata it seems hangup one channel (receving )
and generate 'fast busy' tone.
I hack chan_mgcp and my threewaycalling works ok!
But why indicat
<
Pavel Zheltouhov wrote:
When I connected over two mgcp channels and sending numerical
indication to cisco ata it seems hangup one channel (receving )
and generate 'fast busy' tone.
I hack chan_mgcp and my threewaycalling works ok!
But why indications are sent after I press hookflash on answering
Hello everybody,
Anyone knows where I can find information for configure the Asterisk as
MGCP-H323 transcoder?
May be an example or something.
Thank you very much
Best regards
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.dig
Thomas Dingermann wrote:
When I connected over two mgcp channels and sending numerical
indication to cisco ata it seems hangup one channel (receving )
and generate 'fast busy' tone.
I hack chan_mgcp and my threewaycalling works ok!
But why indications are sent after I press hookflash on answerin
If you mean to use MGCP clients and an E1/PRI to the telco with asterisk
as the 'origo', that's what I do, so yes.
On Fri, 2003-11-07 at 14:24, Lal, Deepak (Contractor) wrote:
> I did not get any answers to my earlier posting. I hope I have better luck this
> time- The question: Is it possible to
Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Roy Sigurd
Karlsbakk
Sent: Friday, November 07, 2003 6:09 AM
To: Asterisk Users
Subject: Re: [Asterisk-Users] MGCP - Repost
If you mean to use MGCP clients and an E1/PRI to the telco with asterisk
as the 'origo
le ? thanks - DL
-Original Message-
From: Roy Sigurd Karlsbakk [mailto:[EMAIL PROTECTED]
Sent: Friday, November 07, 2003 9:09 AM
To: Asterisk Users
Subject: Re: [Asterisk-Users] MGCP - Repost
If you mean to use MGCP clients and an E1/PRI to the telco with asterisk
as the 'origo
hi,
i've successfully configured 2 audiocodes mp104 fxs and fxo configured
using SIP with asterisk
currently i want to add another 2 boxes of audiocodes mp200 to add up a
total of 4 trunks
how can i combine this mgcp to run together with asterisk SIP?
Thanks in advanced
Steven
___
Hi,
I forgot to say that I have about 300 MGCP endpoints in
my real network.
Best regards,
Sergi Gabunia
- Original Message -
From:
Sergi Gabunia
To: [EMAIL PROTECTED]
Sent: Thursday, November 27, 2003 12:05
PM
Subject: [Asterisk-Users] MGCP
problem
Hi,
A colleague of mine used Dlink DS-104S with good success.
Peter
At 02:14 6/12/03 -0300, you wrote:
Hi,
For MGCP users. Is there any success stories with any MGCP IAD
vendor.
I´m trying to find an IAD which works with Asterisk. I´ve tried the
Cisco IAD 2430 without success; but SIP
> Message: 7
> From: "Juan J. Sierralta P." <[EMAIL PROTECTED]>
> To: Asterisk Users <[EMAIL PROTECTED]>
> Organization: Telefonica CTC Chile
> Date: 06 Dec 2003 02:14:22 -0300
> Subject: [Asterisk-Users] MGCP IADs
> Reply-To: [EMAIL PROTECTED]
>
riday, December 05, 2003 11:14 PM
To: Asterisk Users
Subject: [Asterisk-Users] MGCP IADs
Hi,
For MGCP users. Is there any success stories with any MGCP IAD
vendor.
I´m trying to find an IAD which works with Asterisk. I´ve tried the Cisco
IAD 2430 without success; but SIP on this IAD works but
]
> Subject: RE: [Asterisk-Users] MGCP IADs
>
> I am new to * and after getting some much needed help from someone on
the
> IRC channel with my config files I got my system up and going.
> I have several dlink DG 104s's and they seem to work fine on my LAN
the
> only
> tro
-3287
IAXTEL (700) 857-3287
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andrew Joakimsen
Sent: Saturday, December 06, 2003 11:41 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] MGCP IADs
Have you tried jus
Hello
I have a problem with my MGCP voice gateway.
I use D-Link DG104S
Boot PROM Version 3.0B38-D
Firmware Version3.0T86-D
I tried asterisk v 0.7.2 and I am using latest CVS version now.
When I dial a number very fast, or when I use a redial function, my asterisk receives
coupled
Shouldn't the endpoint be MGCP/aaln/[EMAIL PROTECTED] instead of
[EMAIL PROTECTED]? AFAIK, the MGCP RFC recommends aaln/# for
analog lines.
Can you audit the endpoint to check if you got the name right?
Hope this helps.
Juan J. Sierralta P. wrote:
On Wed, 2004-05-05 at 13:45, Brad White wrote
I am trying to dial a mgcp extention from my sip phone and i am getting this
error message. anyone got any idea?
error
I> -- Executing Dial("SIP/2204-5dc2", "MGCP/aaln/[EMAIL PROTECTED]") in new
stack
May 19 22:30:01 NOTICE[1251156800]: chan_mgcp.c:1104 find_subchannel: Gateway
'10.0.1.150'
Friends i am new to Asterisk.
I have bunch of Residential gateways Megaco RFC 3015 complaint.
Has any one been successful in installing and running Asterisk in production
environment with RGW RFC 3015 complaint clients ??
I am excited to see my RGW come to play if i can get Asterisk to work.
Pros
you need make change in indications.conf
wells
On 3/25/05, Daniel Eboa <[EMAIL PROTECTED]> wrote:
>
> Hello List,
>
> I'm trying to setup MGCP channel with a Centile Media Hub box. My
> Centile box has 4 ports and I got no dial tone. Can somebody help with
> this isuue?
> This is my mgcp.conf a
: [Asterisk-Users] MGCP issue
you need make change in indications.conf
wells
On 3/25/05, Daniel Eboa <[EMAIL PROTECTED]> wrote:
>
> Hello List,
>
> I'm trying to setup MGCP channel with a Centile Media Hub box. My
> Centile box has 4 ports and I got no dial tone. Can someb
Hi,
> -Original Message-
> 1- Anybody implement mgcp useragent in *.
Nope. Hasn't been done yet.
> 2- Where can i get that.
Not available in your nearest drugstore.
> 3- if no then anybody can help me to write it down.
Digium ?
Florian
_
On Mon, 7 Mar 2005, Fabio Margarido wrote:
> I'm an asterisk newbie and have just joined this mailing list. I have to
> use asterisk as a call agent that supports MGCP requests. I'm reading
> the documentation from asteriskdocs and voip-info.org but those cover
> more specifically only IAX and
I know this is not the most appropriated list to
this, but I will try:
Does anyone know what is the criteria to the
generation of the transaction identifiers in MGCP? I mean, are they generated by
a randomic method?
I'm using Asterisk and MGCP eyeP Phone and observed
that the RSIP and NTFY
The RFC specification alone is not sufficient, there are many signaling
"packages" that are defined elsewhere.
Also, RFC 2705 is out of date, see RFC 3435
Leonardo J. Tramontina wrote:
Sirs,
According to RFC 2705 (MGCP), these are the parameters that are used
in the transactions:
Return
On Fri, Dec 31, 2004 at 10:03:54AM -0300, Leonardo J. Tramontina wrote:
> 1) I am using Asterisk and a softphone called MGCP eyeP Phone. I was
> watching the traffic between them at Ethereal and observed that some of
> them have extra parameters. Example: CreateConnection has "Request
> Identifi
Good Morning,
I'm having an issue with callerid display when calles are placed _from_
an mgcp device (8x8 ata w/mgcp firmware). Internally, there are several
different sip devices and one mgcp device. Calls from any of the sip
devices to any other device (sip or mgcp) have name/number displayed
I have a fxo endpoint installed in a Cisco router. I would like in my
dialplan to get an extension call a telephone number through that fxo
endpoint.
Since with zaptel channels it is done like:
exten => 0999,1,Dial(DAHDI/2-1/111) --> being 111 the phone number I
want to call.
I thought that for
Download patch for ncs support in mgcp from http://asterisk.urtho.net/tiki-index.php .
2006/7/7, Christian Schnelle <[EMAIL PROTECTED]>:
Hi,i try to use asterisk together with a webstar mgcp cable modem. if iconfigure the cable modem to act as a nuera
v5.2 call agent it connectsto asterisk. but i
Asterisk can only be the proxy/server for MGCP, you connect other
devices to it. Asterisk can not be a user agent connecting to other
MGCP server.
On 10/11/06, Paul Ianas <[EMAIL PROTECTED]> wrote:
Hello everybody!
I have an Asterisk 1.2.12.1 server with SIP as the VoIP protocol.
What
cc:
[EMAIL PROTECTED] Subject: [Asterisk-Users] mgcp
endpoint question
PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: [Asterisk-Users] MGCP behind NAT
Hello Wade:
There is MGCP firmware available too which appears to help in NAT mode.
I have been playing around with these CPG for quite a few months now.
I have been able to get them to work only with G711 codecs. I was
> From: "Humberto Atristain" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Subject: RE: [Asterisk-Users] MGCP behind NAT
> Date: Wed, 30 Jul 2003 19:07:40 -0500
> Reply-To: [EMAIL PROTECTED]
>
> My trouble is that the MGCP devices lost the connectio
Has anyone gotten 3 way calling to work? There seems to be
no way to swap to the other call and sometimes the unit will generate the call
waiting tone ever second. It also seems that if you try to flash the call and
then hang up you have to pick up the phone, flash back to the first call an
Sure
RTFM
Jeremy McNamara
Sebastian Sill wrote:
Hello,
I have some MGCP VoIP gateways and some H323v2 VoIP gateways,
Can a use the Asterisk for interconnect the VoIP boxes?
If I can anyone knows how to configure it?
Thank you very much
Best regards
Sebastian Sill.
Uruguay.
Hi,
I have a Cisco IAD 2431 which has MGCP protocol; I cannot make it to
work againts Asterisk; at least there is some MGCP conversation between
them but when I offhook a phone attached to IAD I get no tone at all.
As anybody managed to get working Asterisk against an MGCP Cisco
ga
Does MGCP transverse NAT? Seeing as the only decent yet cheap IP phone
is the Swissvoice, it would be rather helpful.
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
I am have trouble getting caller id to work here is my current mgcp.conf am
I missing something?
=
Mgcp.conf
[general]
port=2427
[Egraph-1]
;dlink 104s-1
host = 12.151.207.2
context = local
line => aaln/1
callerid = "jim's office 1" <3
Hello,
I`m using the Dlink DG-104s with asterisk, it works ok for incoming
outgoing calls. The problem is, when for exmple the line on the dg104s
is off hook and I dial that extension I dont get a busy but a ringing
tone. And no call waiting signals on the dg104s side. Is there a way to
detec
Hi
::: i have an MGCP voip phone (IPH-90), but i couldn't get it work with
asterisk.
::: i'm using asterisk 0.7.2 on openbsd 3.4
the config file and the debug infos are here:
http://nostromo.jol.hu/asterisk/
so not to flood the mailing list.
regards
wiking
Hi there,
::: i have an mgcp phone (iph-90) using the sample mgcp.conf for it
(the dlink section). i've tried both asterisk stable and development
release but i'm getting the following error when i lift the receiver:
. .. in stable branch:
-- MGCP mgcp_new(MGCP/aaln/[EMAIL PROTECTED]) created i
Hi!
> I am trying to dial a mgcp extention from my sip phone and i am getting this
> error message. anyone got any idea?
Do a "mgcp show endpoints" at the CLI and watch the output.
> May 19 22:30:01 NOTICE[1251156800]: chan_mgcp.c:1104 find_subchannel: Gateway
> '10.0.1.150' (and thus its endpoi
Phillip & group,
I tried what you suggested and it did not work i included some more information
for you to take a look at...
i have got the MGCP working sort of for my asterisk server. My phone plugged
into the dlink gateway does not ring when i call it. My sip phone does ring
when i dial the e
Hi!
> Below is my conf that i have now.Is there anything I need to configure in the
> Dlink gateway for this to work with asterisk?
Here a few things you can try:
- upgrade to CVS-HEAD (not 0.9.0) and see if things are different
- issue a "ngrep port 2727" to monitor what your dlink is sending
-
Hello:
I want to receive calls from my SIP proxy and re-route them to one
of the analog lines on my Cisco VG200 ia MGCP and Asterisk.
Inbound SIP calls will arrive with the five digit called number preficed
with an "m" by the proxy. I'd like to them match these calls against
a rule like exten =>
Title: MGCP files for Polycom
Does anybody know were I can download the MGCP files for the Polycom IP500?
Thanks
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRI
Hi folks
I seted up the asterisk with an active ISDN B1 AVM Card (german vendor)
and it works fine, various SIP clients (IP fon snom, xlite under
MacOSX) and also incoming and outgoing connectins. Ok. No problem.
After that I configured a CP7940G with a MGCP IOS. It's connected to the
asterisk to
Is someone running mgcp firmware with asterisk?
I need to verify the phone issues
Thanks.
Sergio
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit
1 - 100 of 167 matches
Mail list logo