David,
Not sure if you already got a reply or not - but it looks to me like
your FXO module is on port 3 - not 2 (see the dmesg output). Give that
a try.
HTH- Ben
On Wednesday, May 19, 2004, at 12:51 PM, David Creemer wrote:
Hi-
I'm totally stumped configuring my TDM400P with one FXS and one FXO
Following up with a thought experiment. If I start with one TDM400P,
FXS module in slot 1, FXO module in slot 3, my zaptel.conf file looks
like this:
fxoks=1
fxsks=3
If I were to put an X101P in this machine, and load the wcfxo module
*first*, what would the zaptel.conf channel list look like?
Looks to me like you have 1 and 3 installed, not 1 and 2. Look
close at your dmesg output.
> Hi-
>
> I'm totally stumped configuring my TDM400P with one FXS and one FXO
> module. Before I got the FXO module, I used to have an X101P, and
> everything was working very wel
Problem fixed. Here's the solutions for those who care:
- TDM400P has slots 1,2,3,4
- "channel" in the zaptel.conf must match the slot the card is in.
I have the daughter cards in slot 1 and 3.
BUT here's the kicker: if the zaptel.conf configures channel 1 and 2
(not 3). No error is reported, and
I am getting a similar problem with a TDM400P with 4 FXO ports,
Module 1 not working properly, IE not picking up the calls at all.
I have 3 TDM400P cards, 1 loaded with 4 FXO ports, 2 loaded with 4 FXS ports.
Does anyone know if this problem with port 1 is only with the FXO modules
or if it's als
Hi,
On Wed, 2004-05-19 at 14:51, David Creemer wrote:
> Hi-
>
> I'm totally stumped configuring my TDM400P with one FXS and one FXO
> module. Before I got the FXO module, I used to have an X101P, and
> everything was working very well. Now * doesn't seem to recognize the
> FXO channel. I've se
There is a known problem with the first port on the TDM400P. For me, the
problem resulted in randomly dropped calls on the FXO port, which was
plugged into position 1. Since you only have two daughterboards, try
using positions 2-3-4 and don't use position 1, and see of that solves
your problem.
Hi-
I'm totally stumped configuring my TDM400P with one FXS and one FXO
module. Before I got the FXO module, I used to have an X101P, and
everything was working very well. Now * doesn't seem to recognize the
FXO channel. I've searched the wiki and the list archives. Stock Debian
3.0 stable inst