hi all,
i am trying to get my TE410P (see previous posts) working in Austria
(telekom Austria - i am still waiting for an answer for my questions).
my /etc/zaptel.conf looks like
span=1,1,0,ccs,hdb3,crc4,yellow
span=2,2,0,ccs,hdb3,crc4,yellow
bchan=1-15,17-31
dcha
On Thu, 17 Jun 2004, Wolfgang Pichler wrote:
> ... on the card i can see the two leds pulsing red (i think thats the
> yellow alaram - or i am wrong) ?
Are you sure it is not a red alarm? That would indicate a loss of link.
I think you can check with the command zttool.
Are you sure the cables
Am Do, den 17.06.2004 schrieb Peter Svensson um 9:43:
> On Thu, 17 Jun 2004, Wolfgang Pichler wrote:
>
> > ... on the card i can see the two leds pulsing red (i think thats the
> > yellow alaram - or i am wrong) ?
>
> Are you sure it is not a red alarm? That would indicate a loss of link.
> I th
What is in your config file ?
zaptel.conf ?
also, check the crc4 settings
and
maybe the wire you are using is wrong since some equippment needs
crossed wires, some needs straight wires. Crossed would be 1-4 2-5
cheers
Michael
On Thu, 2004-06-17 at 10:28, Wolfgang Pichler wrote:
> Am Do, den 17.0
On Thu, 17 Jun 2004, Wolfgang Pichler wrote:
> > Are you sure the cables are correct?
> > Have you set the jumpers on the card to E1 and not left them on T1?
> The jumpers are on E1 - the cables should be ok (they are working with
> other hardware) - and the card is directly connected to a simens
Am Do, den 17.06.2004 schrieb Michael Bielicki um 10:32:
> What is in your config file ?
i've already posted my config in my first post - but here is my
/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4,yellow
span=2,2,0,ccs,hdb3,crc4,yellow
bchan=1-15,17-31
dchan=16
bchan=
Throw out the yellow.
Check if for sure the other side is using crc4.
On Thu, 2004-06-17 at 10:45, Wolfgang Pichler wrote:
> Am Do, den 17.06.2004 schrieb Michael Bielicki um 10:32:
> > What is in your config file ?
> i've already posted my config in my first post - but here is my
> /etc/zaptel.co
Am Do, den 17.06.2004 schrieb Peter Svensson um 10:38:
> On Thu, 17 Jun 2004, Wolfgang Pichler wrote:
>
> > > Are you sure the cables are correct?
> > > Have you set the jumpers on the card to E1 and not left them on T1?
> > The jumpers are on E1 - the cables should be ok (they are working with
>
On Thu, 17 Jun 2004, Wolfgang Pichler wrote:
> but the same cable works great with an other hardware (a Parlay i60)
You could try a loopback plug to make sure your TE410P does not have a
damaged receiver.
Peter
--
Peter Svensson ! Pgp key available by finger, fingerprint:
<[EMAIL PROTECTED