On Sun, Dec 31, 2006 at 05:08:26PM +0100, Jarek Jarzebowski wrote:
Dnia 31-12-2006 o 16:17:19 Tzafrir Cohen [EMAIL PROTECTED]
napisał(a):
On Sun, Dec 31, 2006 at 03:59:14PM +0100, Jarek Jarzebowski wrote:
Hi All,
is anybody using Sangoma A102d card with Asterisk on Debian 3.1?
I
Dnia 31-12-2006 o 17:39:10 Tzafrir Cohen [EMAIL PROTECTED]
napisał(a):
On Sun, Dec 31, 2006 at 05:08:26PM +0100, Jarek Jarzebowski wrote:
Dnia 31-12-2006 o 16:17:19 Tzafrir Cohen [EMAIL PROTECTED]
napisał(a):
On Sun, Dec 31, 2006 at 03:59:14PM +0100, Jarek Jarzebowski wrote:
Hi All,
is
On Fri, Dec 22, 2006 at 09:58:22AM -0700, Colin Anderson wrote:
LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o
Building modules, stage 2.
MODPOST
*** Warning: register_wanec_iface
[/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined!
*** Warning: unregister_wanec_iface
Hello Colin:
Please try ftp://ftp.sangoma.com/linux/custom/Yuan/wanpipe-2.3.4-2.1.gz
Best Regards
Josue
2006/12/23, Tzafrir Cohen [EMAIL PROTECTED]:
On Fri, Dec 22, 2006 at 09:58:22AM -0700, Colin Anderson wrote:
LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o
Building modules,
On Sat, Dec 23, 2006 at 02:14:14PM +0200, Tzafrir Cohen wrote:
On Fri, Dec 22, 2006 at 09:58:22AM -0700, Colin Anderson wrote:
LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o
Building modules, stage 2.
MODPOST
*** Warning: register_wanec_iface
Hi Carlos,
please delete the line dchan=16.
dchan is use for ccs framing.
You can use the follow:
#
span=1,0,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
#
i hope this help you ;p
--
Humberto Figuera - Using Linux 2.6.18
Usuario GNU/Linux 369709
Caracas - Venezuela
GPG
LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o
Building modules, stage 2.
MODPOST
*** Warning: register_wanec_iface
[/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined!
*** Warning: unregister_wanec_iface
[/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined!
CC
Looks like you do not have Zaptel source installed, or WanPipe can't
find the Zaptel source.
Colin Anderson wrote:
LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o
Building modules, stage 2.
MODPOST
*** Warning: register_wanec_iface
[/root/wanpipe/patches/kdrivers/wanec/wanec.ko]
!
-Original Message-
From: Eric ManxPower Wieling [mailto:[EMAIL PROTECTED]
Sent: Friday, December 22, 2006 10:02 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Sangoma Wanpipe 2.3.4-3 compilation fails
under FC2 with Zaptel 1.0.9.2
Looks like you do
On Fri, 2006-12-22 at 05:43 -0400, Humberto Figuera wrote:
Hi Carlos,
please delete the line dchan=16.
dchan is use for ccs framing.
You can use the follow:
#
span=1,0,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
#
Muchas gracias! Everything is
Carlos: Had you tried re-compiling wanpipe?
Had a similar problem, and eventhough I'm pretty sure I compiled
wanpipe and it did the zaptel patch succesfully, once I finished with
the Unicall installation, somehow the patch was not wotking correctly.
So after a couple of days of
Carlos Chavez wrote:
CAS signalling on span 1 conflicts with HDLC with FCS check on channel
My guess is not to use HDLC, as the error says above, that it conflicts
with CAS.
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary Safety,
On Thu, 21 Dec 2006 08:33:27 -0500, Doug Lytle wrote
Carlos Chavez wrote:
CAS signalling on span 1 conflicts with HDLC with FCS check on channel
My guess is not to use HDLC, as the error says above, that it
conflicts with CAS.
I wish it were that easy and obvious. I only found
I am having a problem trying to get a Sangoma A101 to work with
Unicall. I have installed the sangoma drivers and everything seems to
be well but when I try to run ztcfg I get the following error:
CAS signalling on span 1 conflicts with HDLC with FCS check on channel
16.
Here is
Hi,
Is anyone here using any DS3 card (like Sangoma A301) in Asterisk, to handle
672 voice channels?
If so, which hardware are you using? Which driver? Did you have any problem
related to echo cancellation?
-Lars
___
--Bandwidth and Colocation
On Mon, 2006-12-04 at 14:04 -0300, Lars Knopf wrote:
Hi,
Is anyone here using any DS3 card (like Sangoma A301) in Asterisk, to
handle 672 voice channels?
Afaik the Sangoma card is not channelized so can not be used with
Asterisk.
If so, which hardware are you using? Which driver? Did you
Anyone using a Sangoma A102 with a Dell 750? We are looking at going this
route but needed some input. I really only need a Single T1 port, but this
server doesn't have a PCI-X port, which the A101 apparently requires?
Thoughts, Suggestions?
K
: [asterisk-users] Sangoma Dell 750
Anyone using a Sangoma A102 with a Dell 750? We are looking at going
this route but needed some input. I really only need a Single T1 port,
but this server doesn't have a PCI-X port, which the A101 apparently
requires?
Thoughts, Suggestions?
K
I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and
installation was successful. zttool, ztcfg, all show card is installed
properly. I copied the parameters from my old working zaptel.conf,
zapata.conf and zapata-auto.conf. Verified on Sangoma website that these
files are
Zeeshan Zakaria wrote:
I upgraded from Tormenta2 to Sangoma A101. I followed the instructions,
and installation was successful. zttool, ztcfg, all show card is
installed properly. I copied the parameters from my old working
zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma
I am currently looking at designing a testsystem that incorporates Sangoma's a301 with either Tyan or Supermicro,and AMD combinations.I was wondering if anyone here has any experience of running a301s with*.In addition, if they would possibly have any experience specifically with the above
Hi!
I have a sangoma A104d and have some questions about the echo canceller.
Maybe someone can answer by questions.
1. EC can be activated with wancfg and in /etc/asterisk/zapata.conf.
What is the difference? I have some suspicions - can someone confirm or
correct this?
wancfg: hw echo
Hello Guys,We have a problem in configuring Sangoma A104. We want the 2 ports to beconfigured as E1 and the 2 ports as T1.We already run wancfg and configure the 2 ports as T1 and the last 2 ports as t1.
Below is the logs when we issue wanrouter restart.[EMAIL PROTECTED]:/tmp# wanrouter
We have a problem in configuring Sangoma A104. We want the 2 ports to be
configured as E1 and the 2 ports as T1.
If I'm not mistaken, you can't do that with the A104D, that's why they
sold me 2 x A102 for the same price as a A104. Better check with
Sangoma.
hth
Sangoma has excellent support, why dont you ask them?
On 8/31/06, Angelito Manansala [EMAIL PROTECTED] wrote:
Hello Guys,
We have a problem in configuring Sangoma A104. We want the 2 ports to be
configured as E1 and the 2 ports as T1.
We already run wancfg and configure the 2 ports as T1 and
I emailed then last 2 hours ago. Just waiting for their reply.ThanksOn 8/31/06, Moises Silva [EMAIL PROTECTED]
wrote:Sangoma has excellent support, why dont you ask them?On 8/31/06, Angelito Manansala
[EMAIL PROTECTED] wrote: Hello Guys, We have a problem in configuring Sangoma A104. We want the
I had similar error messages when I configured an A101, using the latest
stable drivers, and found that restarting LINUX seemed to solve the problem
Seems wanrouter stop doesn't clean up after itself.
do a shutdown -r now and see if it comes up properly
John Novack
Angelito Manansala wrote:
Hi!
I'm trying to install a A104d.
1. LSPCI detects the card:
# lspci
...
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 03)
05:04.0 Class affe: Sirrix AG security technologies Sirrix.PCI4S0 4-port
ISDN S0 interface (rev 02)
05:09.0 Network controller:
Hi! Problem solved. I just removed the wanrouter modules and tried
again. This thime there were some more modules loaded and the card is found:
]# wanrouter hwprobe
---
| Wanpipe Hardware Probe Info |
---
1 . AFT-A104-SH : SLOT=9 : BUS=5
Sangoma provides EXCELLENT support.
I would try them
I just installed a A101, and had some problems, but the hwprobe found
the card OK.
You MIGHT want to try different PCI slots before contacting them
My problem was somewhat different, and was fixed by a reboot of the
machine between
Hi,
after booting my server I get the following error:
Aug 17 16:40:57 localhost kernel: wanpipe1: Disable E1 CAS signalling mode!
Aug 17 16:40:57 localhost kernel: wanpipe2: Disable E1 CAS signalling mode!
Aug 17 16:40:57 localhost kernel: Registered tone zone 11 (Italy)
Aug 17 16:40:58
Hello,
We bought Sangoma A101 card and after some troubles successfully
compiled modules (Kernel 2.4.32, wanpipe 2.3.3-3 and zaptel 1.0.8
drivers). wanpipemon can reach w1g1 interface, but asterisk (1.2.8)
not... When I'm trying to reload chan_zap so error occurs:
christine*CLI reload chan_zap.so
Does anybody else have issues with the Hardware Echo Canceller and DTMF
detection on this card? I installed an IVR system (no VoIP), and the
Zap channel does not detect DTMF tones properly. For example the user
hits 123 and the systems sees 1123 or just 23. Trying relaxdtmf yes/no
does not
I was wondering if other A200 users experience the same problem I have.
If someone accidentaly pulls one of the FXO cables, the driver does not
detect that and Asterisk still tries to send calls via that port. On the
other hand Digium cards immediately sense the cable disconnect and calls
are
This bothers me a bit too, as I've certainly noticed this. But then, the typical phone system shouldn't be in a position where cables are accidentially unplugged very often. I've found Sangoma to be very open to suggestions though... Maybe if we bug them about it enough, they'll include it in the
Alex Robar wrote:
Hi all,
I have a Sangoma A200 card with hardware echo cancellation. The card has
12 ports (10 of which are active; All FXO). Twice on this particular
card I've seen all ports simply stop receiving incoming calls. There is
no other indication of this, however. I am able to
know what Sangoma tells
you.
From: Alex Robar [mailto:[EMAIL PROTECTED]
]
Sent: Tuesday, July 25, 2006 2:12 PMTo: Asterisk Users
Mailing List - Non-Commercial DiscussionSubject: [asterisk-users]
Sangoma Stops Receiving Calls
Hi all,I have a Sangoma A200 card with hardware echo
Hi all,I have a Sangoma A200 card with hardware echo cancellation. The card has 12 ports (10 of which are active; All FXO). Twice on this particular card I've seen all ports simply stop receiving incoming calls. There is no other indication of this, however. I am able to place outgoing calls just
Alex Robar wrote:
Hi all,
I have a Sangoma A200 card with hardware echo cancellation. The card has 12
ports (10 of which are active; All FXO). Twice on this particular card I've
seen all ports simply stop receiving incoming calls. There is no other
indication of this, however. I am able to
Flynn,(First off, my mistake... It's an 8 port card with 6 active ports). I have not seen any type of pattern that would give me a hint as to what is going on here. We seemed to be working fine for a month, and then all of a sudden calls weren't coming in. I rebooted the system, calls came in fine
What country are you in?
Please let us know what Sangoma tells
you.
From: Alex Robar [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 25, 2006 2:12 PMTo: Asterisk Users
Mailing List - Non-Commercial DiscussionSubject: [asterisk-users]
Sangoma Stops Receiving Calls
Hi all,I
PROTECTED]
]
Sent: Tuesday, July 25, 2006 2:12 PMTo: Asterisk Users
Mailing List - Non-Commercial DiscussionSubject: [asterisk-users]
Sangoma Stops Receiving Calls
Hi all,I have a Sangoma A200 card with hardware echo
cancellation. The card has 12 ports (10 of which are active; All FXO
It boots fine without the card.
Jim.
El Flynn wrote:
Jim Lynch wrote:
I attempted to install a new A200 module with one each FSX-2 and
FXO-2 module. I connected an internal power connector to the board
as instructed, but when the system reboots, it just beeps at me. It
doesn't even let me
Did you try using the card in an other PCI slot?Chris
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Hi,
I've recently been testing an A200 from Sangoma with a single FXO card
(2 ports).
I'm pleased with the card apart from hangup, or lack of it.
I'm in the UK, so I am wondering:-
a) Anybody else in the Uk using the same card on BT lines
b) which method of hangup detection is used on BT
I attempted to install a new A200 module with one each FSX-2 and FXO-2
module. I connected an internal power connector to the board as
instructed, but when the system reboots, it just beeps at me. It
doesn't even let me get to a bios prompt. I removed both of the modules
and it still
Jim Lynch wrote:
I attempted to install a new A200 module with one each FSX-2 and FXO-2
module. I connected an internal power connector to the board as
instructed, but when the system reboots, it just beeps at me. It
doesn't even let me get to a bios prompt. I removed both of the modules
Just wondered if you fixed your hangup problem?
Mike
On 6/29/06, El Flynn [EMAIL PROTECTED] wrote:
chan (Alpha Trilogies Networks) wrote:
Hi,
Does some one experience the Sangoma A20X-ec series card that cant detect
the hangup tone?
snip
[channels]
context = from-pstn3
switchtype =
Hi,
Does some one experience the Sangoma A20X-ec series card that cant detect
the hangup tone?
I got * server 1.2.5 and running on Centos 4.3, I hock up to two PSTN lines
and each time some one call in and my phone delay 1-2 sec (this is Asterisk
delay nothing to do with Sangoma) and it rings on
chan (Alpha Trilogies Networks) wrote:
Hi,
Does some one experience the Sangoma A20X-ec series card that cant detect
the hangup tone?
snip
[channels]
context = from-pstn3
switchtype = national
usecallerid=yes
hidecallerid=no
transfer=yes
echocancel = yes
echocancelwhenbridged = yes
Hi,
can anybody confirm if there are any patches required for Caller ID to
work on a Sangoma A200 card on a BT line in the UK?
With Asterisk 1.2.9.1
thanks
Mike
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To
Hiya all,
I have had no end of trouble trying to get my A101 E1 card working on
a new asterisk installation. The sangoma tech people have ignored my emails
about this.
All the installation of wanpipe seems to go ok, and zaptel. it all installed
compiled and does all the wanpipe hwprobe exactly
On 6/29/06, Mark Ackroyd [EMAIL PROTECTED] wrote:
Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10614 setup_zap: Unknown
signalling method 'pri_cpe'
Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10239 setup_zap: Signalling
must be specified before any channels are.
Am I right in thinking that's it's
Sent: Thursday, June 29, 2006 5:20 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Sangoma card A101 Card troubles.
Hiya all,
I have had no end of trouble trying to get my A101 E1 card working on
a new asterisk installation. The sangoma tech people have
I have the following pbx setup: asterisk 1.2.9.1, IVR setup, Sangoma
A104D PRI card with HW echo cancel, hw dtmf detect. When calling inbound
(from a cell phone or wired home phone) I can get the pbx to recognize
the digits I type in for my extensions 100% of the time. However, when
dialing
We had a similar issue pop up last week with our A104D's, and we ended
up putting the older TE410P's back in as a workaround.
We are running Asterisk 1.2.4, Zaptel 1.2.5, and the wanpipe 2.3.4
beta drivers. only three of the 8 servers we have in production were
affected, and we are nearing our
Try the relaxdtmf settings. It worked for us.
Andre
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|Subject: Re: [Asterisk-Users] sangoma unicall m2rfc
|
|Anton Krall wrote:
|
|Uys, Steve Underwood
|
|I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for
|R2MFC, I get the far and local end unblocked but as soon as I try to
|make a call I get dialing and then protocol failure
Uys, Steve Underwood
I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for R2MFC, I
get the far and local end unblocked but as soon as I try to make a call I
get dialing and then protocol failure..
Do you guys know if there are any issues with sangoma and unicall? Anybody
has an
Are you around Steve?
|-Original Message-
|From: [EMAIL PROTECTED]
|[mailto:[EMAIL PROTECTED] On Behalf Of
|Anton Krall
|Sent: Monday, June 19, 2006 11:58 AM
|To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
|Subject: [Asterisk-Users] sangoma unicall m2rfc
|
|Uys, Steve
-Commercial Discussion'
|Subject: [Asterisk-Users] sangoma unicall m2rfc
|
|Uys, Steve Underwood
|
|I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9
|for R2MFC, I get the far and local end unblocked but as soon
|as I try to make a call I get dialing and then protocol failure..
|
|Do
Anton Krall wrote:
Uys, Steve Underwood
I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for R2MFC, I
get the far and local end unblocked but as soon as I try to make a call I
get dialing and then protocol failure..
Do you guys know if there are any issues with sangoma and
|Subject: Re: [Asterisk-Users] sangoma unicall m2rfc
|
|Anton Krall wrote:
|
|Uys, Steve Underwood
|
|I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for
|R2MFC, I get the far and local end unblocked but as soon as I try to
|make a call I get dialing and then protocol failure..
|
|Do you
Users Mailing List - Non-Commercial Discussion
|Subject: Re: [Asterisk-Users] sangoma unicall m2rfc
|
|Anton Krall wrote:
|
|Uys, Steve Underwood
|
|I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for
|R2MFC, I get the far and local end unblocked but as soon as I try to
|make a call
Discussion
|Subject: Re: [Asterisk-Users] sangoma unicall m2rfc
|
|Anton, Please read this document I wrote, is in spanish:
|
|http://phpmexic.u33.0web-hosting.com/wordpress/misc/mfcr2-aster
|isk-unicall.pdf
|
|There you will find some ideas about how to debug problems with mfcr2.
|In my blog I have some
Is there any way of running a diagnostic on a Sangoma A102 card ? Our
lines have gone down and I want to avoid the usual BT It must be your
equipment line with technical proof.
At the moment I have a BLUE/RED alarm on zap show status
Julian.
___
June 2006 10:20
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] sangoma card test
Is there any way of running a diagnostic on a Sangoma A102 card ? Our
lines have gone down and I want to avoid the usual BT It must be your
equipment line with technical proof.
At the moment I have
of hardware.
Steve
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Julian
Lyndon-Smith
Sent: 16 June 2006 10:20
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] sangoma card test
Is there any way of running a diagnostic on a Sangoma A102 card
On Wed, Jun 14, 2006 at 06:28:38PM +0200, Mimmus wrote:
Hi,
using Sangoma drivers:
- doing 'lsmod', I see:
zaptel ... wanpipe,wctdm24xxp,wctdm,wcfxo,wcte11xp,wct1xxp,wct4xxp,tor2
I'd like to avoid loading all these modules. What have I to do?
Because you try to modprobe them all instead of
Can you help me, how to update the old sangoma driver?
I downloaded the last driver from sangoma's web.
kind regards,
Szolke
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
Hi,
using Sangoma drivers:
- doing 'lsmod', I see:
zaptel ... wanpipe,wctdm24xxp,wctdm,wcfxo,wcte11xp,wct1xxp,wct4xxp,tor2
I'd like to avoid loading all these modules. What have I to do?
- do I need to have 'zaptel' startup script under /etc/init.d ?
Thanks
--
Domenico Viggiani
Mimmus wrote:
Hi,
using Sangoma drivers:
- doing 'lsmod', I see:
zaptel ... wanpipe,wctdm24xxp,wctdm,wcfxo,wcte11xp,wct1xxp,wct4xxp,tor2
I'd like to avoid loading all these modules. What have I to do?
- do I need to have 'zaptel' startup script under /etc/init.d ?
Thanks
AFAIK, there is
Im trying to install and configure sangoma ...
every thing is OK but when type the command wanrouter
start the following error apears:
wan Driver not found.
Thanks for any help
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users
I've been using Asterisk 1.2.6 with a 4 port FXO Sangoma A200 card for
the past month without many problems (other than the fact that the
Sangoma card doesn't disconnect hung up calls immediately, which I
posted about in another thread, and has still not been fixed),
however, I had a call from
Mike Garey wrote:
It turns out that the Sangoma card had suddently decided to stop
answering on channels 2,3 and 4, so if someone was using channel 1,
then no other calls would be picked up. We could, however, make
outgoing calls. I tried restarting Asterisk and it didn't make a
difference.
On 5/26/06, Dr. Michael J. Chudobiak [EMAIL PROTECTED] wrote:
Mike Garey wrote:
It turns out that the Sangoma card had suddently decided to stop
answering on channels 2,3 and 4, so if someone was using channel 1,
then no other calls would be picked up. We could, however, make
outgoing
Mike Garey wrote:
And as far as I know, this isn't a problem that plagues all FXO cards,
as there are many other users who don't have the same problem.
Are you sure your LEC is sending you disconnect supervision on the
line? That's the only way *anybody's* cards are going to know if the
On Friday 26 May 2006 17:07, Mike Garey wrote:
And as far as I know, this isn't a problem that plagues all FXO cards,
as there are many other users who don't have the same problem. I just
got off the phone with a Sangoma tech representative and they said
that they tried testing hangup
On Friday 26 May 2006 18:36, Brian Capouch wrote:
I have a fantasy that someday in the near future, after VoIP has
provided true local loop competition even out here in Hooterville, I'll
run into the local telco folks, now down on their luck. In my vision
they'll be sitting on the street
I've been having problems with my A20002D lately - callers from the PSTN
don't hear me when I answer, but I hear them. Disabling echo
cancellation in zapata.conf brings the audio (and echo) back. This used
to work fine, until two days ago.
Well, just to complete my own thread, this seems to
Well, looks like we had a similar issue. Replaced the Sangoma and it worked.
We have asked for a failure analysis from Sangoma on the defective card.
Dr. Michael J. Chudobiak wrote:
I've been having problems with my A20002D lately - callers from the
PSTN don't hear me when I answer, but I hear
Klaus Darilion wrote:
Even if I answer n, the Setup script still compiles wanpipe modules.
Thus I guess answering yes is only needed if I want to have kernel
sources synchronized with the installed modules (binaries). If I do not
care about a kernel source tree which includes latest wanpipe
+0200
From: Klaus Darilion [EMAIL PROTECTED]
Subject: [Asterisk-Users] sangoma A102 installation question
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
MSN: [EMAIL PROTECTED]
Email: [EMAIL PROTECTED]
Wiki: http://sangoma.editme.com
Message: 2
Date: Thu, 11 May 2006 21:22:39 +0200
From: Klaus Darilion [EMAIL PROTECTED]
Subject: [Asterisk-Users] sangoma A102 installation question
To: Asterisk Users Mailing List - Non-Commercial Discussion
Hi all,
I've been having problems with my A20002D lately - callers from the PSTN
don't hear me when I answer, but I hear them. Disabling echo
cancellation in zapata.conf brings the audio (and echo) back. This used
to work fine, until two days ago.
The only weird thing in the logs is this:
Hi!
I've went through the READMEs and could not answer this question:
During installation, the Setup program asks:
Would you like update/upgrade wanpipe drivers? (y/n)
For a pure Asterisk TDM installation - is it required to patch the
kernel or is this only when using the sangoma cards as
Klaus,As far as I've been told, yes, you do need to compile the kernel modules (even if it's just TDM functionality).AlexOn 5/11/06, Klaus Darilion
[EMAIL PROTECTED] wrote:
Hi!I've went through the READMEs and could not answer this question:During installation, the Setup program asks: Would you
Even if I answer n, the Setup script still compiles wanpipe modules.
Thus I guess answering yes is only needed if I want to have kernel
sources synchronized with the installed modules (binaries). If I do not
care about a kernel source tree which includes latest wanpipe drivers I
think
the hang up as a flash.
-Original Message-
From: Matt [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Cc:
Sent: Tue, 2 May 2006 16:30:56 -0400
Delivered: Tue, 02 May 2006 17:28:33
Subject:[Asterisk-Users] Sangoma
-Commercial Discussion
asterisk-users@lists.digium.com
Cc:
Sent: Tue, 2 May 2006 16:30:56 -0400
Delivered: Tue, 02 May 2006 17:28:33
Subject:[Asterisk-Users] Sangoma Card Question
Hi,
I have a Sangoma 200A (I think that's the model #) analog 4 port card.
It works great... however
Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Cc:
Sent: Tue, 2 May 2006 16:30:56 -0400
Delivered: Tue, 02 May 2006 17:28:33
Subject:[Asterisk-Users] Sangoma Card Question
Hi,
I have a Sangoma 200A (I think that's the model #) analog 4 port
card
Message-
From: Matt [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Cc:
Sent: Tue, 2 May 2006 16:30:56 -0400
Delivered: Tue, 02 May 2006 17:28:33
Subject:[Asterisk-Users] Sangoma Card Question
Hi
2006 17:28:33
Subject:[Asterisk-Users] Sangoma Card Question
Hi,
I have a Sangoma 200A (I think that's the model #) analog 4 port
card.
It works great... however almost everytime after someone
hangs up a
call they were on.. the system rings the call back in, as
though
Hi,
I have a Sangoma 200A (I think that's the model #) analog 4 port card.
It works great... however almost everytime after someone hangs up a
call they were on.. the system rings the call back in, as though it
were a new call coming in. When they pickup no one is there.
Can anyone suggest why
May 2006 16:30:56 -0400
Delivered: Tue, 02 May 2006 17:28:33
Subject:[Asterisk-Users] Sangoma Card Question
Hi,
I have a Sangoma 200A (I think that's the model #) analog 4 port card.
It works great... however almost everytime after someone hangs up a
call they were on.. the system rings the call
, 2 May 2006 16:30:56 -0400
Delivered: Tue, 02 May 2006 17:28:33
Subject:[Asterisk-Users] Sangoma Card Question
Hi,
I have a Sangoma 200A (I think that's the model #) analog 4 port card.
It works great... however almost everytime after someone hangs up a
call they were on.. the system rings
Discussion
asterisk-users@lists.digium.com
Cc:
Sent: Tue, 2 May 2006 16:30:56 -0400
Delivered: Tue, 02 May 2006 17:28:33
Subject:[Asterisk-Users] Sangoma Card Question
Hi,
I have a Sangoma 200A (I think that's the model #) analog 4 port card.
It works great... however almost everytime after someone
We ran some tests on
our line here where a scope and voltmeter, we were able to see the waveform
changes on incoming call and the voltage at 6-7v during the conversation, but no
drop in voltage (or reverse tip/ring) when the remote side hanged-up. The
voltage went back to around 48v after
On 4/26/06, Eric ManxPower Wieling [EMAIL PROTECTED] wrote:
Are you in the USA or Canada?
I'm in Canada. Toronto, Ontario to be exact. And it was on a local
ontario Asterisk users group where other people with Sangoma A200
cards mentioned they were having the same problem.. So it could be
Mike Garey wrote:
snip
; How many seconds of silence before we end the recording
maxsilence=10
; Silence threshold (what we consider silence, the lower, the more sensitive)
silencethreshold=128
the maxsilence setting doesn't really help, as I believe that only
limits how long we
301 - 400 of 626 matches
Mail list logo
