Discussion
Subject: Re: [Asterisk-Users] some EICON Diva 4BRI questions
Back to ISDN BRI crossover cable. After reading some ISDN specs I came
to the conclusion a crossover cable should be:
3---4
4---3
5---6
6---5
But I also found other pin layouts (e.g.
http://www.cisco.com/warp/public/788/signalling
Armin Schindler wrote:
I use two possibilities.
a) when I want to connect the ISDN card directly with the device using a
short cable, I just cut the cable in the middle an reconnect them crossed
and add the resistors here. (Maybe this is not the correct way for
termination, but it
On Tue, 2 May 2006, Klaus Darilion wrote:
Armin Schindler wrote:
I use two possibilities.
a) when I want to connect the ISDN card directly with the device using a
short cable, I just cut the cable in the middle an reconnect them
crossed
and add the resistors here. (Maybe this is not the
Armin Schindler wrote:
Thanks for verifying the crossover layout.
FYI: http://www.ksi.at/online-kataloge/kat8A/8A-109/8A-109.htm
I've ordered some of them - I do not like soldering :-)
Thanks for the link. But these devices do not seem to have a crossed
connection.
No, just termination.
On Fri, 28 Apr 2006, Klaus Darilion wrote:
Back to ISDN BRI crossover cable. After reading some ISDN specs I came to the
conclusion a crossover cable should be:
3---4
4---3
5---6
6---5
Yes.
But I also found other pin layouts (e.g.
Back to ISDN BRI crossover cable. After reading some ISDN specs I came
to the conclusion a crossover cable should be:
3---4
4---3
5---6
6---5
But I also found other pin layouts (e.g.
http://www.cisco.com/warp/public/788/signalling/bri_voice_port_cfg.html)
Armin, how do you construct your BRI
Sent: 28 April 2006 08:49
To: Armin Schindler
Cc: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] some EICON Diva 4BRI questions
Back to ISDN BRI crossover cable. After reading some ISDN specs I came
to the conclusion a crossover cable should
Armin Schindler wrote:
On Wed, 26 Apr 2006, Klaus Darilion wrote:
On Sun, April 23, 2006 16:30, Armin Schindler said:
On Sat, 22 Apr 2006, Klaus Darilion wrote:
But I'm still confused. Usually, if a line needs termination, the
termination is needed on both ends. Thus, if there is no line
On Thu, 27 Apr 2006, Klaus Darilion wrote:
Armin Schindler wrote:
On Wed, 26 Apr 2006, Klaus Darilion wrote:
On Sun, April 23, 2006 16:30, Armin Schindler said:
On Sat, 22 Apr 2006, Klaus Darilion wrote:
But I'm still confused. Usually, if a line needs termination,
the
Hi Armin!
Armin Schindler wrote:
I'm not aware of such a cable to buy. Normaly, when you create a NT-side the
connection is not made with just one cable (like I did because both device
are just 10cm away from each other). In most cases you have an ISDN bus
cabled in the rooms where the
On Thu, 27 Apr 2006, Klaus Darilion wrote:
Hi Armin!
Armin Schindler wrote:
I'm not aware of such a cable to buy. Normaly, when you create a NT-side
the connection is not made with just one cable (like I did because both
device are just 10cm away from each other). In most cases you have
On Wed, 26 Apr 2006, Klaus Darilion wrote:
On Sun, April 23, 2006 16:30, Armin Schindler said:
On Sat, 22 Apr 2006, Klaus Darilion wrote:
But I'm still confused. Usually, if a line needs termination, the
termination is needed on both ends. Thus, if there is no line
termination
inside
On Sun, April 23, 2006 16:30, Armin Schindler said:
On Sat, 22 Apr 2006, Klaus Darilion wrote:
But I'm still confused. Usually, if a line needs termination, the
termination is needed on both ends. Thus, if there is no line
termination
inside the DIVA card, we would termination in TE mode too.
2006/4/23, Armin Schindler [EMAIL PROTECTED]:
On Sun, 23 Apr 2006, Olivier Krief wrote: 2006/4/21, Armin Schindler [EMAIL PROTECTED]:But if you want to forward a call (which was already accepted by Asterisk)
to another CAPI application, it is not possible. (Well, Eicon has a special driver
Olivier Krief wrote:
When writing receiving a fax over CAPI, do you mean receiving a fax
over CAPI with Asterisk and processing it with spandsp ?
No, with a full Eicon Diva 4BRI card, it does hardware faxing. Instead
of using rxfax (which uses spandsp), you'd use capicommand(receivefax)
On Mon, 24 Apr 2006, Olivier Krief wrote:
2006/4/23, Armin Schindler [EMAIL PROTECTED]:
On Sun, 23 Apr 2006, Olivier Krief wrote:
2006/4/21, Armin Schindler [EMAIL PROTECTED]:
But if you want to forward a call (which was already accepted by
Asterisk)
to another CAPI
Hi Armin!
Armin Schindler wrote:
On Fri, 21 Apr 2006, Klaus Darilion wrote:
Hi!
I've forgotten to ask an important question:
Does Diva Server V-4BRI with Asterisk support BRI P2P and P2MP mode?
Yes, and each port can be configured separately.
I guess also NT/TE can be configured for each
On Mon, 24 Apr 2006, Klaus Darilion wrote:
Hi Armin!
Armin Schindler wrote:
On Fri, 21 Apr 2006, Klaus Darilion wrote:
Hi!
I've forgotten to ask an important question:
Does Diva Server V-4BRI with Asterisk support BRI P2P and P2MP mode?
Yes, and each port can be
2006/4/24, Armin Schindler [EMAIL PROTECTED]:
When using a card with onboard DSPs (or even the software fax of AVM Fritzbinary-only driver) you can do faxing with the CAPI interface. That meansyou don't get the audio data stream, you get the fax-data instead which can
be save in a file.In that
2006/4/21, Armin Schindler [EMAIL PROTECTED]:
But if you want to forward a call (which was already accepted by Asterisk)to another CAPI application, it is not possible. (Well, Eicon has a specialdriver which can do a lot of CAPI extensions, but I did not try this yet).
So if you want to do that, I
On Sun, 23 Apr 2006, Olivier Krief wrote:
2006/4/21, Armin Schindler [EMAIL PROTECTED]:
But if you want to forward a call (which was already accepted by Asterisk)
to another CAPI application, it is not possible. (Well, Eicon has a
special
driver which can do a lot of CAPI extensions,
On Sat, 22 Apr 2006, Klaus Darilion wrote:
On Fri, April 21, 2006 15:19, Armin Schindler said:
Hi Klaus,
Thanks for the detailed answers and isdn for Linux basics. I will take
the opportunity to ask some more questions :-)
On Fri, April 21, 2006 12:24, Armin Schindler said:
On
On Fri, April 21, 2006 15:19, Armin Schindler said:
Hi Klaus,
Thanks for the detailed answers and isdn for Linux basics. I will take
the opportunity to ask some more questions :-)
On Fri, April 21, 2006 12:24, Armin Schindler said:
On Fri, 21 Apr 2006, Klaus Darilion wrote:
3. Is the
Hi!
I have some (short) question about the Eicon DIVA (V-)4BRI cards I want
to have (short) answered before buying the DIVA card. I know there are
several Eicon guys active on the list, thus I ask on the list instead of
directly to Eicon so that all other will benefit as well.
1. Do Eicon
-Users] some EICON Diva 4BRI questions
Hi!
I have some (short) question about the Eicon DIVA (V-)4BRI cards I want
to have (short) answered before buying the DIVA card. I know there are
several Eicon guys active on the list, thus I ask on the list instead of
directly to Eicon so that all other
On Fri, April 21, 2006 11:45, David Waugh said:
Hello Klaus,
I will answer your questions In turn:
1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode?
Yes they do.
2. Can the clock (master/slave) be configured independent from the mode
(TE/NT)
No
Thus, what is the limitation?
TE =
On Fri, 21 Apr 2006, Klaus Darilion wrote:
Hi!
I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to
have (short) answered before buying the DIVA card. I know there are several
Eicon guys active on the list, thus I ask on the list instead of directly to
Eicon so that
On Fri, 21 Apr 2006, Klaus Darilion wrote:
On Fri, April 21, 2006 11:45, David Waugh said:
6. Difference between V-4BRI and 4BRI: As far as I understand the 4BRI
is the better (more expensive) card which also offers FAX on/offramp.
Nevertheless I can use V-4BRI for faxing when using
Discussion
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] some EICON Diva 4BRI questions
On Fri, April 21, 2006 11:45, David Waugh said:
Hello Klaus,
I will answer your questions In turn:
1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode?
Yes
Discussion
Subject: RE: [Asterisk-Users] some EICON Diva 4BRI questions
On Fri, April 21, 2006 11:45, David Waugh said:
Hello Klaus,
I will answer your questions In turn:
1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode?
Yes they do.
2. Can the clock (master/slave) be configured independent
Hi Armin!
Thanks for the detailed answers and isdn for Linux basics. I will take
the opportunity to ask some more questions :-)
On Fri, April 21, 2006 12:24, Armin Schindler said:
On Fri, 21 Apr 2006, Klaus Darilion wrote:
3. Is the PIN layout for TE or NT mode?
It is TE PIN layout, you
- Non-Commercial Discussion
Subject: RE: [Asterisk-Users] some EICON Diva 4BRI questions
On Fri, April 21, 2006 11:45, David Waugh said:
Hello Klaus,
I will answer your questions In turn:
1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode?
Yes they do.
2. Can the clock (master/slave
On Fri, 21 Apr 2006, Klaus Darilion wrote:
On Fri, April 21, 2006 12:33, David Waugh said:
Hello Klaus,
...
I haven't tried spandsp and a V-Series card as the card was not designed
for fax applications. As a result it has never been tested. If you want
to fax with the card then we would
Armin Schindler wrote:
Using spandsp and V-4BRI does not work?
That will work. It's just that the on-board fax capabilities won't work, but
any other software fax will work like with other cards.
Just a note that I've never managed to get this to work on my V-4BRI
cards: If I attempt to
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Klaus
Darilion
Sent: 21 April 2006 11:04
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] some EICON Diva 4BRI questions
On Fri, 21 Apr 2006, Avi Miller wrote:
Armin Schindler wrote:
Using spandsp and V-4BRI does not work?
That will work. It's just that the on-board fax capabilities won't work,
but any other software fax will work like with other cards.
Just a note that I've never managed to get this
Hi Klaus,
Thanks for the detailed answers and isdn for Linux basics. I will take
the opportunity to ask some more questions :-)
On Fri, April 21, 2006 12:24, Armin Schindler said:
On Fri, 21 Apr 2006, Klaus Darilion wrote:
3. Is the PIN layout for TE or NT mode?
It is TE PIN layout,
To benefit from DIVA Server 4BRI fax hardware capabilities, what is the best software combination ? Asterisk and Hylafax ?Shall we then allocate destination numbers and or ports for each of those 2 applications ?
And if you want to offer to every user, a unique extension for fax and voice, would
On 21 Apr 2006, at 18:21, Olivier Krief wrote:
To benefit from DIVA Server 4BRI fax hardware capabilities, what is
the best software combination ? Asterisk and Hylafax ?
Shall we then allocate destination numbers and or ports for each of
those 2 applications ?
And if you want to offer
On Fri, 21 Apr 2006, Olivier Krief wrote:
To benefit from DIVA Server 4BRI fax hardware capabilities, what is the best
software combination ? Asterisk and Hylafax ?
You can use any combination of CAPI based software in parallel. You just
need to create the rules for which application shall act
40 matches
Mail list logo
