Re: [asterisk-users] Asterisk installation script on CentOS7 with systemd [SOLVED]

On Mon, Dec 19, 2016 at 05:10:42PM +0100, Olivier wrote: > Thanks for the tip: > changing to permissive mode made it ! > > Using methods suggested in [1], do you think its possible and worth the > effort to configure SELinux to work with Asterisk/Systemd in Enforcing mode > ? > > [1] https://wik

Re: [asterisk-users] Asterisk installation script on CentOS7 with systemd

On Mon, Dec 19, 2016 at 03:54:47PM +0100, Olivier wrote: > Hello, > > For a new project, I'm adapting existing installation script to CentOS 7. > I must admit I don't understand how to adapt things to systemd. > > Here are my questions: > > 1. I don't see any systemd sub-directory in asterisk-13

Re: [asterisk-users] Asterisk installation script on CentOS7 with systemd [SOLVED]

Le 19/12/2016 à 17:10, Olivier a écrit : 2016-12-19 16:11 GMT+01:00 Jean Aunis >: Le 19/12/2016 à 15:54, Olivier a écrit : Running systemctl start asterisk fails with : Dec 19 15:43:08 foobar systemd: PID file /var/run/asterisk/asterisk.pid

Re: [asterisk-users] Asterisk installation script on CentOS7 with systemd [SOLVED]

2016-12-19 16:11 GMT+01:00 Jean Aunis : > Le 19/12/2016 à 15:54, Olivier a écrit : > > Hello, > > For a new project, I'm adapting existing installation script to CentOS 7. > I must admit I don't understand how to adapt things to systemd. > > Here are my questions: > > 1. I don't see any systemd su

Re: [asterisk-users] Asterisk installation script on CentOS7 with systemd

Le 19/12/2016 à 15:54, Olivier a écrit : Hello, For a new project, I'm adapting existing installation script to CentOS 7. I must admit I don't understand how to adapt things to systemd. Here are my questions: 1. I don't see any systemd sub-directory in asterisk-13.13.1/contrib. Do you think su

[asterisk-users] Asterisk installation script on CentOS7 with systemd

Hello, For a new project, I'm adapting existing installation script to CentOS 7. I must admit I don't understand how to adapt things to systemd. Here are my questions: 1. I don't see any systemd sub-directory in asterisk-13.13.1/contrib. Do you think such directory and matching Makefile target c

Re: [asterisk-users] Asterisk Installation

Hey Chris, Starts from here, https://wiki.asterisk.org/wiki/display/AST/Getting+Started or try Asterisk Complete guide in pdf format. If you are looking for something graphical, go for elastix or freepbx. Thanks ~Arun On Thu, Nov 24, 2016 at 12:28 AM, christopher kamutumwa < chriskamutu...@gma

[asterisk-users] Asterisk Installation

Goodday users Am quite new to asterisk and trying to configure it with an fxo and fxs digium card. also i need a gui interface implemented. I have a centos 6.8 server any tutorial i could use for install and configuration? would appreciate. Thanks Chris -- __

[asterisk-users] Asterisk Installation

Hello Experts, I was trying to follow the instructions in the Installation of AsteriskNow 32 bit installation. I am not able to get the graphical interface as mentioned in the wiki. Also, after reboot, the DNS settings does not seem to be fine. Yum update seems to be throwing errors. Regards,

Re: [asterisk-users] asterisk installation under a single directory

On Monday 15 Oct 2012, sudeep melekar wrote: > hello, > i want to install asterisk 1.8 in a single directory > "myasterisksetup" i.e after asterisk installs it put some of it's > installation files in different directories > e.g /var/log/asterisk > /var/run/asterisk > and many more > > i want all

Re: [asterisk-users] asterisk installation under a single directory

On Mon, Oct 15, 2012 at 3:07 AM, sudeep melekar wrote: > hello, > i want to install asterisk 1.8 in a single directory "myasterisksetup" > i.e after asterisk installs it put some of it's installation files in > different directories > e.g /var/log/asterisk > /var/run/asterisk > and many more > > i

Re: [asterisk-users] asterisk installation under a single directory

On 10/15/2012 09:07 AM, sudeep melekar wrote: [snip] i m completely new to asterisk so any help would be appreciated If you are totally new to Asterisk I recommend you first read the Asterisk book and go through the wiki. Both have sections how to install the various Asterisk components. Re

[asterisk-users] asterisk installation under a single directory

hello, i want to install asterisk 1.8 in a single directory "myasterisksetup" i.e after asterisk installs it put some of it's installation files in different directories e.g /var/log/asterisk /var/run/asterisk and many more i want all this installation files to be under my directory "myasteriskse

Re: [asterisk-users] Asterisk installation

sterisk-users@lists.digium.com; >asterisk-users@lists.digium.com >Subject: Re: [asterisk-users] Asterisk installation > >Hello, >Many thanks for the info. >OK, I didn't know that. I just installed it. Usually I read the included >read me files and so on but not at this time.

Re: [asterisk-users] Asterisk installation

>> --Original Message-- >> From: Christian >> Sender: [EMAIL PROTECTED] >> To: asterisk-users@lists.digium.com >> ReplyTo: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: [asterisk-users] Asterisk installation >> Sent:

Re: [asterisk-users] Asterisk installation

: [EMAIL PROTECTED]; asterisk-users@lists.digium.com; asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Asterisk installation Hello, Many thanks for the info. OK, I didn't know that. I just installed it. Usually I read the included read me files and so on but not at this time. But I wi

Re: [asterisk-users] Asterisk installation

-- >>From: Christian >>Sender: [EMAIL PROTECTED] >>To: asterisk-users@lists.digium.com >>ReplyTo: Asterisk Users Mailing List - Non-Commercial Discussion >>Subject: [asterisk-users] Asterisk installation >>Sent: Oct 31, 2008 5:25 PM >> >>Hi all, >

Re: [asterisk-users] Asterisk installation

wrote: >Time for you to discover who's your dahdi... > >Asterisk 1.6 used dahdi and not zaptel. >--Original Message-- >From: Christian >Sender: [EMAIL PROTECTED] >To: asterisk-users@lists.digium.com >ReplyTo: Asterisk Users Mailing List - Non-Commercial Discussion &

Re: [asterisk-users] Asterisk installation

Time for you to discover who's your dahdi... Asterisk 1.6 used dahdi and not zaptel. --Original Message-- From: Christian Sender: [EMAIL PROTECTED] To: asterisk-users@lists.digium.com ReplyTo: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] Ast

[asterisk-users] Asterisk installation

Hi all, I've just installed the latest v1.6 release of Asterisk. First, I isntalled libpri. Then i installed zaptel with make config at the end of the isntallation as I usually do. Then I installed Asterisk. However, there is no zapata.conf file in /etc/asterisk. I isntalled the sample configura

Re: [asterisk-users] Asterisk Installation with Radius Support

June 2008 05:06 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk Installation with Radius Support Here is info on Asterisk and Radius http://www.voip-info.org/wiki/view/CW+Radius++for+Asterisk -E No virus found in this incoming message. Checked

Re: [asterisk-users] Asterisk Installation with Radius Support

Here is info on Asterisk and Radius http://www.voip-info.org/wiki/view/CW+Radius++for+Asterisk -E ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://list

Re: [asterisk-users] Asterisk Installation with Radius Support

they get. Thanks, Mark. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Griffin Sent: June 9, 2008 2:37 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk Installation with Radius Support Abid S

Re: [asterisk-users] Asterisk Installation with Radius Support

Abid Saleem wrote: > Hi All, > > Can someone provide me a step by step guide to install and configure > Asterisk 1.2 with Radius using agi scripts. I have currently installed > andconfigured it but it is not disconnecting the call after the > credit_time returned by radius. So I am guessing I

[asterisk-users] Asterisk Installation with Radius Support

Hi All, Can someone provide me a step by step guide to install and configure Asterisk 1.2 with Radius using agi scripts. I have currently installed andconfigured it but it is not disconnecting the call after the credit_time returned by radius. So I am guessing I may have missed some configura

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

vijay, I had a similar problem with a pots line and 1.4.1... zap wasn't loading. from the CLI> check that zap is loaded with 'zap show channels' pbx15*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudodefaultdefault 25

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

Yes when I plug my phone to vonage adapter it rings fine. I will run and send you the output soon. Thanks Vijay On 4/9/07, Stephen Bosch <[EMAIL PROTECTED]> wrote: Vijay Gaur wrote: > I hear ring few times and then it goes to voice mail. Looks like call is > not going to asterisk. My regular ph

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

Vijay Gaur wrote: > I hear ring few times and then it goes to voice mail. Looks like call is > not going to asterisk. My regular phone attached to that line works fine. When you plug the phone into the port on the Vonage ATA that you're using to connect to Asterisk, the phone rings when you call t

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

I hear ring few times and then it goes to voice mail. Looks like call is not going to asterisk. My regular phone attached to that line works fine. Regards, Vijay On 4/9/07, Stephen Bosch <[EMAIL PROTECTED]> wrote: Vijay Gaur wrote: > Hi Stephen, > I made the call from outside phone(cellphone

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

Vijay Gaur wrote: > Hi Stephen, > I made the call from outside phone(cellphone) to my vonage number. > Call went to the voicemail. My extension.conf has > [incoming] > exten=>s,1,Answer() and more lines. > > I assume core show channels should show 1 active channel. Its showing 0. Your calls ar

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

Hi Stephen, I made the call from outside phone(cellphone) to my vonage number. Call went to the voicemail. My extension.conf has [incoming] exten=>s,1,Answer() and more lines. I assume core show channels should show 1 active channel. Its showing 0. Thanks a lot again Stephen. Regards, Vijay

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

Vijay Gaur wrote: > > > Hi All, >I would appreciate a lot if you could help me. I have installed > Asterisk 1.4.1 and zaptel 1.4.2 on my redhat enterprise linux 4. I have > also installed 1 FXO port card: Digium TDM400P. > After loading zaptel driver I could see my digium card's led glow gree

[asterisk-users] Asterisk installation issue - CLI showing 0 active channels

Hi All, I would appreciate a lot if you could help me. I have installed Asterisk 1.4.1 and zaptel 1.4.2 on my redhat enterprise linux 4. I have also installed 1 FXO port card: Digium TDM400P. After loading zaptel driver I could see my digium card's led glow green. Tested with zttool that its in

Re: [Asterisk-Users] Asterisk Installation exits with following error ***

; To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Asterisk Installation exits with following > error > > > > After running make clean; make install, asterisk starts installing > itself but then > terminates after some time with the

RE: [Asterisk-Users] Asterisk Installation exits with following error ***

How do I install curl? Zeeshan A Zakaria -Original Message- From: Rich Adamson [mailto:[EMAIL PROTECTED] Sent: Sunday, November 13, 2005 10:41 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Asterisk Installation exits with following error

Re: [Asterisk-Users] Asterisk Installation exits with following error

> After running make clean; make install, asterisk starts installing itself but > then terminates after some time with the following error: > > > > /usr/bin/ld: cannot find -lidn > > collect 2: Id returned 1 exit status > > make[1]: *** [app_curl.so] Error 1 > > make[1]: Leaving directory

RE: [Asterisk-Users] Asterisk Installation exits with following error

: [Asterisk-Users] Asterisk Installation exits with following error Hi everybody,   After running make clean; make install, asterisk starts installing itself but then terminates after some time with the following error:   /usr/bin/ld: cannot find -lidn

[Asterisk-Users] Asterisk Installation exits with following error

Hi everybody,   After running make clean; make install, asterisk starts installing itself but then terminates after some time with the following error:   /usr/bin/ld: cannot find -lidn collect 2: Id returned 1 exit status make[1]: *** [app_curl.so] Error 1

RE: [Asterisk-Users] Asterisk installation

->Anders Svensson ->Sent: Wednesday, September 28, 2005 5:18 PM ->To: 'Asterisk Users Mailing List - Non-Commercial Discussion' ->Subject: RE: [Asterisk-Users] Asterisk installation -> ->It seems that it must be the cd that is bad. The Dell has an ->option to hit ->F

RE: [Asterisk-Users] Asterisk installation

nsson ->Sent: Wednesday, September 28, 2005 5:18 PM ->To: 'Asterisk Users Mailing List - Non-Commercial Discussion' ->Subject: RE: [Asterisk-Users] Asterisk installation -> ->It seems that it must be the cd that is bad. The Dell has an ->option to hit ->F12 to manu

RE: [Asterisk-Users] Asterisk installation

nt: den 28 september 2005 22:49 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Asterisk installation Actually with Optiplexes (Optipii?) they have a hidden partition on the HDD that runs the setup, if the HDD was formatted you're hoop

RE: [Asterisk-Users] Asterisk installation

quick, 'cause these things boot fast. hth -Original Message- From: Cory Andrews [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 28, 2005 2:37 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Asterisk installation Try going into th

Re: [Asterisk-Users] Asterisk installation

Try going into the BIOS and changing the boot order so your CD-Rom drive is first in the boot sequence. Make sure your IDE cable on the CDRom is not loose, and make sure it is jumpered properly as a slave on your primary IDE BUS, or master on your secondary IDE BUS. When you reboot, you should

[Asterisk-Users] Asterisk installation

     Here comes a newbi question. I have got a used Dell Optiplex GX240  P4 1.7 Ghz with 512 Ram. I have downloaded [EMAIL PROTECTED] and burnt a bootable CD. But the Computer doesn’t start the installation. What can be wrong? The computer is empty with anything on the harddrive. Is i

[Asterisk-Users] Asterisk installation error after CVS update

Good morning! Asterisk 1.0.7 runs fine on my machine with Suse 9.3 when using a downloaded tarball. But as I wanted to have a look at Realtime I decided to download everything again via CVS with # cvs checkout zaptel libpri asterisk and install it. Unfortunately though the Asterisk installation

RE: [Asterisk-Users] Asterisk Installation

Thanks Friends -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yves Sent: Wednesday, March 30, 2005 1:35 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Asterisk Installation Look at www.voip-info.org, you&#x

Re: [Asterisk-Users] Asterisk Installation

Look at www.voip-info.org, you'll have a lot of answers there. Yves [EMAIL PROTECTED] wrote: > Dear User > > I am new to the ASTERISK not even tried to install it yet just want to know > can I user ASTERISK as a VOIP without any Hardware DIGIUM Card I just want > to install ASTERISK as a IAX be

RE: [Asterisk-Users] Asterisk Installation

@lists.digium.comSubject: [Asterisk-Users] Asterisk Installation Dear User I am new to the ASTERISK not even tried to install it yet just want to know can I user ASTERISK as a VOIP without any Hardware DIGIUM Card I just want to install ASTERISK as a IAX between two office, And can you suggest me a document for

[Asterisk-Users] Asterisk Installation

Title: Asterisk Installation Dear User I am new to the ASTERISK not even tried to install it yet just want to know can I user ASTERISK as a VOIP without any Hardware DIGIUM Card I just want to install ASTERISK as a IAX between two office, And can you suggest me a document for NEW person l

RE: [Asterisk-Users] asterisk installation problem

: Re: [Asterisk-Users] asterisk installation problem OK, I solved the problem by myself: openssl-devel was not installed. Unfortunately, there's not a deb-package, so I had to convert the RPM. Regards, thomas On 21 Mar 2004 at 21:29, Thomas Schroeter wrote: > Hello, > I have th

Re: [Asterisk-Users] asterisk installation problem

On Sun, Mar 21, 2004 at 10:09:33PM +0100, Thomas Schroeter wrote: > OK, I solved the problem by myself: > > openssl-devel was not installed. > > Unfortunately, there's not a deb-package, so I had to convert the > RPM. Here's the one I use: http://packages.debian.org/stable/devel/libssl-dev --

Re: [Asterisk-Users] asterisk installation problem

OK, I solved the problem by myself: openssl-devel was not installed. Unfortunately, there's not a deb-package, so I had to convert the RPM. Regards, thomas On 21 Mar 2004 at 21:29, Thomas Schroeter wrote: > Hello, > I have the following problem installing Asterias on Debian woody: > > Inst

[Asterisk-Users] asterisk installation problem

Hello, I have the following problem installing Asterias on Debian woody: Installation of zaptel and libpri works find, after "make clean; make install;" for asterisk, it exits with make: *** [ast_expr.c] Error 1 Before there were several errors, starting with: cli.c:31: build.h: No such file o

Re: [Asterisk-Users] asterisk installation error

On Sunday 16 November 2003 22:33, C M wrote: > i am getting these errors while installing asterisk. i > reconfigured kernel and i have all the modules > installed. > kernel-source > readline > readline-devel > openssl > openssl-devel > > this is the error: (at the last part of the > installation) >

Re: [Asterisk-Users] asterisk installation error

On Sun, Nov 16, 2003 at 08:33:22PM -0800, C M wrote: > hi, > > i am getting these errors while installing asterisk. i > reconfigured kernel and i have all the modules > installed. > kernel-source > readline > readline-devel > openssl > openssl-devel > > this is the error: (at the last part of the

[Asterisk-Users] asterisk installation error

hi, i am getting these errors while installing asterisk. i reconfigured kernel and i have all the modules installed. kernel-source readline readline-devel openssl openssl-devel this is the error: (at the last part of the installation) gcc -g -o asterisk -Wl,-E io.o sched.o logger.o frame.o load

Re: [Asterisk-Users] Asterisk installation

On Wednesday 30 July 2003 08:06 am, Wen Wen wrote: > great! it works. I am now able to get the cli prompt with "asterisk > -vvvcg" > > when i try to use "/usr/sbin/safe_asterisk" script to start, i > still got the error of > "Asterisk ended with exit status 127". I guess I can use the > "asterisk -

Re: [Asterisk-Users] Asterisk installation

server. but I would like to know why the "safe_asterisk" does not work. thanx. Wen From: Roy Sigurd Karlsbakk <[EMAIL PROTECTED]> To: [EMAIL PROTECTED],"Wen Wen" <[EMAIL PROTECTED]> Subject: Re: [Asterisk-Users] Asterisk installation Date: Wed, 30 Jul 2003 02:

Re: [Asterisk-Users] Asterisk installation

On Wednesday 30 July 2003 00:29, Wen Wen wrote: > ERROR[1024]: File chan_modem.c, Line 852 (load_module): Unable to load > config modem.conf er add this line to modules.conf noload => chan_modem.so potentially also these noload => chan_modem_aopen.so noload => chan_modem_bestdata.so noload => c

Re: [Asterisk-Users] Asterisk installation

On Wednesday 30 July 2003 00:29, Wen Wen wrote: > ERROR[1024]: File chan_modem.c, Line 852 (load_module): Unable to load > config modem.conf add this line noload => chan_modem.so ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com

Re: [Asterisk-Users] Asterisk installation

nd (No such file or directory) == Registered application 'Playtones' == Registered application 'StopPlaytones' [res_monitor.so] => (Call Monitoring Resource) == Registered application 'Monitor' == Registered

Re: [Asterisk-Users] Asterisk installation

> But when I run the "safe_asterisk", I got the "Asterisk died with code 127" > error. run asterisk -gvvvc to get full error outputs :) roy ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users

[Asterisk-Users] Asterisk installation

Hi I tried to install the * in my Radhat 7.3 machine. The "gmake" and "gmake install" went fine, but "gmake sample" gave me errors of "configs/*.adsi", "sounds/demo-*" and "sounds/*.mp3" errors. I created a dummy.adsi in the configs folder and commented out the "sounds/demo-*" and "sounds/*.mp3