Hi,
thanks for the help. It turns out the this device I had, an Orion GSM gateway, does not talk MFC/R2,
but some variant of R2, according to Steve U.
thanks anyways :)
Facundo Ameal wrote:
These are the different meanings for the diferrent error codes:
T1 TIMEOUT = 32769
T2 TIM
These are the different meanings for the diferrent error codes:
T1 TIMEOUT = 32769
T2 TIMEOUT = 32770
T3 TIMEOUT = 32771
UNEXPECTED MF SIGNAL= 32772
UNEXPECTED CAS = 32773
INVALID STATE = 32774
SET_CAS FAILURE = 32775
SEIZE ACK
Yusuf, there are several things can be wrong. Make sure you have
configured the correct protocol variant, DNIS and CID. Also check you
really need CRC4 checking.
I wrote a document to help debugging this stuff, you can find it here:
http://moy.ivsol.net/unicall/mfcr2-asterisk-unicall-0.2-english
Hi,
I have made some headway with this. Let me explain a abit of the setup. I have an Orion GSM
Gateway, that was connected to a Cisco AS5300 via E1. When I looked at the AS5300 config, it was
talking R2 to the Orion. So I have tried to connect the Orion direclty to Asterisk (leaving out th
Hi,
if that means I should post my config, here goes:
zaptel:
span=1,1,3,cas,hdb3,crc4
cas=1-15:1101
cas=17-31:1101
unicall.conf:
protocolvariant=id,10,10
protocolend=cpe
group=1
channel => 1-15
channel => 17-31
wanpipe1.conf
FE_MEDIA= E1
FE_LCODE= HDB3
FE_FRAME= CRC4
F
Hi Yusuf, how are you?
It orders in the list its configurations, so that let us can help.
Best Regards
Josue
2007/1/8, yusuf <[EMAIL PROTECTED]>:
Hi all,
I have Asterisk 1.2.10, zaptel 1.2.7, spandsp-0.0.3pre22 compiled, and a
Sangoma A101, and when I
make a call I get this:
Jan 8 13:04:0
Hi all,
I have Asterisk 1.2.10, zaptel 1.2.7, spandsp-0.0.3pre22 compiled, and a Sangoma A101, and when I
make a call I get this:
Jan 8 13:04:06 DEBUG[12252]: chan_unicall.c:2000 unicall_exception: Exception
on 19, channel 1
Jan 8 13:04:06 WARNING[12252]: chan_unicall.c:627 unicall_report:
