when placing calls to the system through SIP, I got these messages,
Dec 19 00:26:55 WARNING[5570]: channel.c:2571 ast_request: No translator
path exists for channel type Zap (native 68) to 256
Dec 19 00:26:55 NOTICE[5570]: app_dial.c:1056 dial_exec_full: Unable to
create channel of type 'Zap'
On Mon, Dec 18, 2006 at 11:22:13PM +0200, O.Kamal wrote:
when placing calls to the system through SIP, I got these messages,
Dec 19 00:26:55 WARNING[5570]: channel.c:2571 ast_request: No translator
path exists for channel type Zap (native 68) to 256
Dec 19 00:26:55 NOTICE[5570]:
Why do I need g729 license?, i am not doing any transcoding in the middle.
it is all g729 passthrough.
softphone---asterisk---zap
On 12/18/06, Tzafrir Cohen [EMAIL PROTECTED] wrote:
On Mon, Dec 18, 2006 at 11:22:13PM +0200, O.Kamal wrote:
when placing calls to the system through SIP, I got
O.Kamal wrote:
Why do I need g729 license?, i am not doing any transcoding in the
middle. it is all g729 passthrough.
softphone---asterisk---zap
I believe you are. Zap is ulaw.
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary Safety,
What zap device do you have that encodes/decodes g729?
- Original Message -
From: O.Kamal
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, December 18, 2006 4:37 PM
Subject: Re: [asterisk-users] ZAP problem
Why do I need g729 license?, i am
g729?
- Original Message -
*From:* O.Kamal [EMAIL PROTECTED]
*To:* Asterisk Users Mailing List - Non-Commercial
Discussionasterisk-users@lists.digium.com
*Sent:* Monday, December 18, 2006 4:37 PM
*Subject:* Re: [asterisk-users] ZAP problem
Why do I need g729 license?, i am not doing any
Hii All
I have problem about zap channel.
When I am trying to make 2 sip call in same time first
is succesful but second is fail
Sip debug is on and received message for failed call
is Unable to create channel of type 'Zap' failed
Cause 0 unknow
My Extensions conf;
[nortel]
exten =
Emre BALCI wrote:
[nortel]
exten = _1XXX,1,Dial,Zap/1/${EXTEN}
exten = _5XXX,1,Dial,Zap/1/BYEXTENSION
These should be:
exten = _1XXX,1,Dial(Zap/g1/${EXTEN})
exten = _5XXX,1,Dial(Zap/g1/${BYEXTENSION})
You may want to read further on the dial command:
Hi,
I have installed a quadBri card,with
Asterisk-1.0.10 and the bristuff-0.2.0-RC8s (* 1.0.10)
When calling 0207654321 the following
happens:
-- Executing Goto("Zap/1-1 ", "
salsa-helpdesk-day|s|1 ") in new stack-- Goto
(salsa-helpdesk-day,s,1)-- Executing Dial ("Zap/1-1 ",
Hello everybody,
I am having trouble setting up a SIP/analog phone gateway. The SIP
phones are working, just the Zaptel card doesn't seem to work. I am
using the zaptel TDM400P with one FXO module on the last bank (should be
channel 4 I suppose).
When I try to dial out (either via console or
, Consulting, Training
Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Date: Mon, 04 Apr 2005 11:34:49 -0700
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] ZAP problem (No channel type registered for 'Zap')
Hello everybody,
I am
Maik Hassel wrote:
Hello everybody,
I am having trouble setting up a SIP/analog phone gateway. The SIP
phones are working, just the Zaptel card doesn't seem to work. I am
using the zaptel TDM400P with one FXO module on the last bank (should be
channel 4 I suppose).
When I try to dial out
Hello,
I am receiving an error in my error logs any time I receive a call on
the third line in our hunt group.
Sep 20 13:15:03 WARNING[1116939584]: Ring/Off-hook in strange state 6 on
channel 3
The weird part is that the calls seem to work fine, just this error
message is logged. Currently, I
13 matches
Mail list logo
