Discussion
Subject: Re: [Asterisk-Users] some EICON Diva 4BRI questions
Back to ISDN BRI crossover cable. After reading some ISDN specs I came
to the conclusion a crossover cable should be:
3---4
4---3
5---6
6---5
But I also found other pin layouts (e.g.
http://www.cisco.com/warp/public/788/signalling
Armin Schindler wrote:
Thanks for verifying the crossover layout.
FYI: http://www.ksi.at/online-kataloge/kat8A/8A-109/8A-109.htm
I've ordered some of them - I do not like soldering :-)
Thanks for the link. But these devices do not seem to have a crossed
connection.
No, just termination.
k
On Tue, 2 May 2006, Klaus Darilion wrote:
> Armin Schindler wrote:
> > I use two possibilities.
> > a) when I want to connect the ISDN card directly with the device using a
> > short cable, I just cut the cable in the middle an reconnect them
> > crossed
> > and add the resistors here. (Maybe this
Armin Schindler wrote:
I use two possibilities.
a) when I want to connect the ISDN card directly with the device using a
short cable, I just cut the cable in the middle an reconnect them crossed
and add the resistors here. (Maybe this is not the correct way for
termination, but it alway
On Fri, 28 Apr 2006, Klaus Darilion wrote:
> Back to ISDN BRI crossover cable. After reading some ISDN specs I came to the
> conclusion a crossover cable should be:
> 3---4
> 4---3
> 5---6
> 6---5
Yes.
> But I also found other pin layouts (e.g.
> http://www.cisco.com/warp/public/788/signalling/b
Sent: 28 April 2006 08:49
To: Armin Schindler
Cc: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] some EICON Diva 4BRI questions
Back to ISDN BRI crossover cable. After reading some ISDN specs I came
to the conclusion a crossover cable should
Back to ISDN BRI crossover cable. After reading some ISDN specs I came
to the conclusion a crossover cable should be:
3---4
4---3
5---6
6---5
But I also found other pin layouts (e.g.
http://www.cisco.com/warp/public/788/signalling/bri_voice_port_cfg.html)
Armin, how do you construct your BRI
On Thu, 27 Apr 2006, Klaus Darilion wrote:
> Hi Armin!
>
> Armin Schindler wrote:
> > I'm not aware of such a cable to buy. Normaly, when you create a NT-side
> > the connection is not made with just one cable (like I did because both
> > device are just 10cm away from each other). In most cases y
Hi Armin!
Armin Schindler wrote:
I'm not aware of such a cable to buy. Normaly, when you create a NT-side the
connection is not made with just one cable (like I did because both device
are just 10cm away from each other). In most cases you have an ISDN bus
cabled in the rooms where the necessa
On Thu, 27 Apr 2006, Klaus Darilion wrote:
> Armin Schindler wrote:
> > On Wed, 26 Apr 2006, Klaus Darilion wrote:
> > > On Sun, April 23, 2006 16:30, Armin Schindler said:
> > > > On Sat, 22 Apr 2006, Klaus Darilion wrote:
> > > > > But I'm still confused. Usually, if a line needs termination,
> >
Armin Schindler wrote:
On Wed, 26 Apr 2006, Klaus Darilion wrote:
On Sun, April 23, 2006 16:30, Armin Schindler said:
On Sat, 22 Apr 2006, Klaus Darilion wrote:
But I'm still confused. Usually, if a line needs termination, the
termination is needed on both ends. Thus, if there is no line
termi
On Sun, April 23, 2006 16:30, Armin Schindler said:
> On Sat, 22 Apr 2006, Klaus Darilion wrote:
>> But I'm still confused. Usually, if a line needs termination, the
>> termination is needed on both ends. Thus, if there is no line
>> termination
>> inside the DIVA card, we would termination in TE m
On Wed, 26 Apr 2006, Klaus Darilion wrote:
> On Sun, April 23, 2006 16:30, Armin Schindler said:
> > On Sat, 22 Apr 2006, Klaus Darilion wrote:
> >> But I'm still confused. Usually, if a line needs termination, the
> >> termination is needed on both ends. Thus, if there is no line
> >> termination
2006/4/24, Armin Schindler <[EMAIL PROTECTED]>:
When using a card with onboard DSPs (or even the software fax of AVM Fritzbinary-only driver) you can do faxing with the CAPI interface. That meansyou don't get the audio data stream, you get the fax-data instead which can
be save in a file.In that c
On Mon, 24 Apr 2006, Klaus Darilion wrote:
> Hi Armin!
>
> Armin Schindler wrote:
> > On Fri, 21 Apr 2006, Klaus Darilion wrote:
> > > Hi!
> > >
> > > I've forgotten to ask an important question:
> > >
> > > Does Diva Server V-4BRI with Asterisk support BRI P2P and P2MP mode?
> >
> > Yes, and e
Hi Armin!
Armin Schindler wrote:
On Fri, 21 Apr 2006, Klaus Darilion wrote:
Hi!
I've forgotten to ask an important question:
Does Diva Server V-4BRI with Asterisk support BRI P2P and P2MP mode?
Yes, and each port can be configured separately.
I guess also NT/TE can be configured for each
On Mon, 24 Apr 2006, Olivier Krief wrote:
> 2006/4/23, Armin Schindler <[EMAIL PROTECTED]>:
> >
> > On Sun, 23 Apr 2006, Olivier Krief wrote:
> > > 2006/4/21, Armin Schindler <[EMAIL PROTECTED]>:
> > > >
> > > >
> > > > But if you want to forward a call (which was already accepted by
> > Asterisk)
Olivier Krief wrote:
When writing "receiving a fax over CAPI", do you mean "receiving a fax
over CAPI with Asterisk and processing it with spandsp" ?
No, with a full Eicon Diva 4BRI card, it does hardware faxing. Instead
of using rxfax (which uses spandsp), you'd use capicommand(receivefax)
w
2006/4/23, Armin Schindler <[EMAIL PROTECTED]>:
On Sun, 23 Apr 2006, Olivier Krief wrote:> 2006/4/21, Armin Schindler <[EMAIL PROTECTED]>:> >> >> > But if you want to forward a call (which was already accepted by Asterisk)
> > to another CAPI application, it is not possible. (Well, Eicon has a> > s
On Sat, 22 Apr 2006, Klaus Darilion wrote:
> On Fri, April 21, 2006 15:19, Armin Schindler said:
> > Hi Klaus,
> >
> >> Thanks for the detailed answers and isdn for Linux basics. I will take
> >> the opportunity to ask some more questions :-)
> >>
> >> On Fri, April 21, 2006 12:24, Armin Schindler
On Sun, 23 Apr 2006, Olivier Krief wrote:
> 2006/4/21, Armin Schindler <[EMAIL PROTECTED]>:
> >
> >
> > But if you want to forward a call (which was already accepted by Asterisk)
> > to another CAPI application, it is not possible. (Well, Eicon has a
> > special
> > driver which can do a lot of CAP
2006/4/21, Armin Schindler <[EMAIL PROTECTED]>:
But if you want to forward a call (which was already accepted by Asterisk)to another CAPI application, it is not possible. (Well, Eicon has a specialdriver which can do a lot of CAPI extensions, but I did not try this yet).
So if you want to do that,
On Fri, April 21, 2006 15:19, Armin Schindler said:
> Hi Klaus,
>
>> Thanks for the detailed answers and isdn for Linux basics. I will take
>> the opportunity to ask some more questions :-)
>>
>> On Fri, April 21, 2006 12:24, Armin Schindler said:
>> > On Fri, 21 Apr 2006, Klaus Darilion wrote:
>>
On Fri, 21 Apr 2006, Olivier Krief wrote:
> To benefit from DIVA Server 4BRI fax hardware capabilities, what is the best
> software combination ? Asterisk and Hylafax ?
You can use any combination of CAPI based software in parallel. You just
need to create the rules for which application shall ac
On 21 Apr 2006, at 18:21, Olivier Krief wrote:
To benefit from DIVA Server 4BRI fax hardware capabilities, what is
the best software combination ? Asterisk and Hylafax ?
Shall we then allocate destination numbers and or ports for each of
those 2 applications ?
And if you want to offer to
To benefit from DIVA Server 4BRI fax hardware capabilities, what is the best software combination ? Asterisk and Hylafax ?Shall we then allocate destination numbers and or ports for each of those 2 applications ?
And if you want to offer to every user, a unique extension for fax and voice, would it
Hi Klaus,
> Thanks for the detailed answers and isdn for Linux basics. I will take
> the opportunity to ask some more questions :-)
>
> On Fri, April 21, 2006 12:24, Armin Schindler said:
> > On Fri, 21 Apr 2006, Klaus Darilion wrote:
> >> 3. Is the PIN layout for TE or NT mode?
> >
> > It is TE
On Fri, 21 Apr 2006, Avi Miller wrote:
> Armin Schindler wrote:
> > > Using spandsp and V-4BRI does not work?
> >
> > That will work. It's just that the on-board fax capabilities won't work,
> > but any other software fax will work like with other cards.
>
> Just a note that I've never managed to
t; From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Klaus
> > Darilion
> > Sent: 21 April 2006 11:04
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Cc: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: RE: [Aste
Armin Schindler wrote:
Using spandsp and V-4BRI does not work?
That will work. It's just that the on-board fax capabilities won't work, but
any other software fax will work like with other cards.
Just a note that I've never managed to get this to work on my V-4BRI
cards: If I attempt to use
On Fri, 21 Apr 2006, Klaus Darilion wrote:
> On Fri, April 21, 2006 12:33, David Waugh said:
> > Hello Klaus,
> ...
> > I haven't tried spandsp and a V-Series card as the card was not designed
> > for fax applications. As a result it has never been tested. If you want
> > to fax with the card then
n Behalf Of Klaus
> Darilion
> Sent: 21 April 2006 11:04
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Cc: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] some EICON Diva 4BRI questions
>
> On Fri, April 21, 2006 11:45, David Waug
Hi Armin!
Thanks for the detailed answers and isdn for Linux basics. I will take
the opportunity to ask some more questions :-)
On Fri, April 21, 2006 12:24, Armin Schindler said:
> On Fri, 21 Apr 2006, Klaus Darilion wrote:
>> 3. Is the PIN layout for TE or NT mode?
>
> It is TE PIN layout, you
isk Users Mailing List - Non-Commercial Discussion
> Cc: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] some EICON Diva 4BRI questions
>
> On Fri, April 21, 2006 11:45, David Waugh said:
>> Hello Klaus,
>>
>> I will answer your
rcial Discussion
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] some EICON Diva 4BRI questions
On Fri, April 21, 2006 11:45, David Waugh said:
> Hello Klaus,
>
> I will answer your questions In turn:
>
> 1. Do Eicon DIVA (V-)4BRI cards su
On Fri, 21 Apr 2006, Klaus Darilion wrote:
> On Fri, April 21, 2006 11:45, David Waugh said:
> > 6. Difference between V-4BRI and 4BRI: As far as I understand the 4BRI
> > is the better (more expensive) card which also offers FAX on/offramp.
> > Nevertheless I can use V-4BRI for faxing when using s
On Fri, 21 Apr 2006, Klaus Darilion wrote:
> Hi!
>
> I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to
> have (short) answered before buying the DIVA card. I know there are several
> Eicon guys active on the list, thus I ask on the list instead of directly to
> Eicon so th
On Fri, April 21, 2006 11:45, David Waugh said:
> Hello Klaus,
>
> I will answer your questions In turn:
>
> 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode?
> Yes they do.
>
> 2. Can the clock (master/slave) be configured independent from the mode
> (TE/NT)
> No
Thus, what is the limitatio
Hello Klaus,
I will answer your questions In turn:
1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode?
Yes they do.
2. Can the clock (master/slave) be configured independent from the mode
(TE/NT)
No
3. Is the PIN layout for TE or NT mode?
The PIN layout is for TE mode
4. When I change the
39 matches
Mail list logo
