Rob Schall wrote:
Are you able to access the phone via a web browser? And did asterisk
register the phone? If both are true and you set the always reboot flag
to 1, then rebooted the phone by hand, there shouldn't be anything
standing in the way.
It seems that it will only reboot if certain
Are you able to access the phone via a web browser? And did asterisk
register the phone? If both are true and you set the always reboot flag
to 1, then rebooted the phone by hand, there shouldn't be anything
standing in the way.
Rob
Stephen Bosch wrote:
Rob Schall wrote:
Correct. Once
No, this is just reboot -- no factory reset.
Rob Townley wrote:
On 5/30/07, *Mojo with Horan Company, LLC* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
An answer to your original question: if you can get someone _to_ the
phones, on the polycom 30x's you would hold the VolDn,
Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] reset Polycom phones remotely
We have Polycom 501 SIP phones. To remotely reboot, one can use the below
command.
# curl -d ntp=ntp --user Polycom:456 --url http:// http://%3cIP IP
Address of the Polycom/form-submit
If all you need is a soft reboot to load config files and want to do it
remotely, there is no need to cut power to the phones. I know this works
on polycom 501 and 601s. I assume it would work on other polycoms as well.
asterisk -rx 'sip notify polycom-check-cfg 192.168.1.XXX '
There is a
Rob Schall wrote:
If all you need is a soft reboot to load config files and want to do it
remotely, there is no need to cut power to the phones. I know this works
on polycom 501 and 601s. I assume it would work on other polycoms as well.
asterisk -rx 'sip notify polycom-check-cfg
- Non-Commercial Discussion
Subject: Re: [asterisk-users] reset Polycom phones remotely
Rob Schall wrote:
If all you need is a soft reboot to load config files and want to do
it
remotely, there is no need to cut power to the phones. I know this
works
on polycom 501 and 601s. I assume it would
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Stephen
Bosch
Sent: Thursday, May 31, 2007 10:24 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] reset Polycom phones remotely
Rob Schall wrote:
If all you need
Savoy, Kevin - Williston, ND wrote:
Not necessarily. If you set the following in the sip.cfg file to 1 it
will reboot even if there are no changes. The default is zero which will
only reboot if there are changes.
voIpProt.SIP.specialEvent.checkSync.alwaysReboot=1/
Hoo-ray! Thanks for this!
Rob Schall wrote:
Correct. Once this is set to 1, then it will reboot regardless. I've
been using this effect for over a year.
Hmn -- just tried this. It doesn't seem to be working...
-Stephen-
___
--Bandwidth and Colocation provided by Easynews.com
An answer to your original question: if you can get someone _to_ the
phones, on the polycom 30x's you would hold the VolDn, VolUp, DND, and
Hold buttons for a while to reboot.
For anyone with the 50x or 60x, you would hold the VolDn, VolUp,
Messages, and Hold buttons.
Moj
Forum wrote:
I
On 5/30/07, Mojo with Horan Company, LLC [EMAIL PROTECTED] wrote:
An answer to your original question: if you can get someone _to_ the
phones, on the polycom 30x's you would hold the VolDn, VolUp, DND, and
Hold buttons for a while to reboot.
For anyone with the 50x or 60x, you would hold the
We have Polycom 501 SIP phones. To remotely reboot, one can use the below
command.
# curl -d ntp=ntp --user Polycom:456 --url http://IP Address of the
Polycom/form-submit
NOTE: You can get the IP address of Polycom by using the
asterisk -rv -x sip show peers command then
Hi Steve -
It's definitely ftp. I have given the phone a static ip. When I set it to
dhcp it just
hangs and cannot get an IP. I can ping the phone and see the web config page
so it is on the network.
Any more suggestions.
I once saw this same sort of behavior on a Polycom 501. It got
Forum wrote on 5/26/07 5:32 PM:
I have provisioned a bunch of Polycom 301 phones to get the config files
from my ftp server. Out of the 4 phones 2 get the config file however
the other 2 cannot contact the boot server. I have reboot the phones a
number of times remotely (the client is 400 km
PROTECTED] On Behalf Of Dave Miller
Sent: Sunday, 27 May 2007 5:56 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] reset Polycom phones remotely
Forum wrote on 5/26/07 5:32 PM:
I have provisioned a bunch of Polycom 301 phones to get the config files
from my
.
Steve
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Miller
Sent: Sunday, 27 May 2007 5:56 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] reset Polycom phones remotely
Forum wrote on 5/26/07 5:32 PM
17 matches
Mail list logo