thanks so much Tod. the problem was that pap2 extensions was bad configured.
and didnt register. I did with xlite. and work. but this is because you
drive me in the right direction. thanks so much. other problem is because I
want to provisining a polycom 601 but until now I dont know how. some said
-Original Message-
From: Philip A. Prindeville [mailto:philipp_s...@redfish-solutions.com]
Sent: Thursday, December 18, 2008 4:24 PM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Starting with net5501 & TDM404E
Justin Phelps wrote:
> Philip Prindeville wrote:
>
>> For m
Justin Phelps wrote:
> Philip Prindeville wrote:
>
>> For modules and settings, look at $MODOPTS and $ZAPMODS and $AUTOMODS in
>> you /mnt/kd/rc.conf file.
>>
>> What does your /etc/modprobe.conf file look like?
>>
>> First focus on getting your hardware properly configured. You can't
>> real
On Dec 18, 2008, at 10:58 AM, Jose Colin wrote:
here the screen shot that you ask
On Thu, Dec 18, 2008 at 12:50 PM, Tod Fitch
wrote:
On Dec 18, 2008, at 10:31 AM, Jose Colin wrote:
HI. I have attached. a screnshot with the result of asterisk -
vv and the sip.conf and extensions.conf
I use a Alix 2c3 board and it works very well. Looking at the specs on the
routerstation I would comment that the Flash memory at 16MB, is not large
enough to hold AstLinux and 64MB RAM is very tight (if not too small).
AstLinux is very powerful and flexible and this particular board looks to
be
Anybody know if Astlinux has been successfully run on the Ubiquity
Routerstation?
http://metrix.net/routerstation-3-lan-3-minipci-usb2-680mhz-64mb-16mb-p-119.html
Looks like a pretty decent platform and isn't expensive especially if
you don't need wireless radios.
-Pete
On Dec 18, 2008, at 10:31 AM, Jose Colin wrote:
HI. I have attached. a screnshot with the result of asterisk -
vv and the sip.conf and extensions.conf
as I told the voip isp provider have same problem for incoming calls
"No route to destination" when attempting Dial(SIP/3624,120,r)
Michael,
thanks for your reply. I will bear this in mind.
Mart
>
> Hi Martin,
>
> I had a similar problem with my Soekris net4801 and a 1-port HFC ISDB
> card. The box was crashing every few days or sometimes just Asterisk
> was silently crashing.
>
> Because I still had warrenty for it, I
Three generic points to check.
In sip.conf, a registration line
In sip.conf, a context pointing to a context in extensions.conf
A context in extensions.conf to route the call
Examples: passwords removed to protect me!
In [general]
register=17476721176:x...@proxy01.sipphone.com
Also in sip.conf
;
On Dec 18, 2008, at 9:04 AM, Jose Colin wrote:
HI. thanks so much for the community. I have a very important
question that I already made but no answer and should be a easy
question for pros like you. so please if you have this question
please share it
the thing is that I install astlinu
My understanding is they are part of the wanpipe package. If they require
something else, let us know what is needed and we'll look at it.
--Original Message--
From: Stephan Monette
To: AstLinux Users Mailing List
ReplyTo: monet...@unlimitel.ca
ReplyTo: AstLinux Users Mailing List
Subject:
HI. thanks so much for the community. I have a very important question that
I already made but no answer and should be a easy question for pros like
you. so please if you have this question please share it
the thing is that I install astlinux, it is said that the astlinux by
default is PBX-only s
Hi,
From what I can read on AstLinux, the drivers for the T1 cards from
Sangoma are included in the AstLinux distribution but I can't find
anything about the analog A200 cards.
Is there any reasons why the driver for the analog cards are not
included in the distribution with AstLinux?
Thanks
Philip Prindeville wrote:
> For modules and settings, look at $MODOPTS and $ZAPMODS and $AUTOMODS in
> you /mnt/kd/rc.conf file.
>
> What does your /etc/modprobe.conf file look like?
>
> First focus on getting your hardware properly configured. You can't
> really do anything before that.
>
> Doi
>Darrick
>
>thank you for your reply.
>
>My hardware is a TDM400P with 2 * FXO and 1 * FXS daughter boards
>
>It has been working fine for the last year. The problems have only come
>about (coincidentally) since going to 0.6.2, and more significantly
>since the temperature has dropped. This partic
On Dec 18, 2008, at 8:19 AM, Martin Rogers wrote:
> Darrick
>
> thank you for your reply.
>
> My hardware is a TDM400P with 2 * FXO and 1 * FXS daughter boards
>
> It has been working fine for the last year. The problems have only
> come
> about (coincidentally) since going to 0.6.2, and more
Darrick
thank you for your reply.
My hardware is a TDM400P with 2 * FXO and 1 * FXS daughter boards
It has been working fine for the last year. The problems have only come
about (coincidentally) since going to 0.6.2, and more significantly
since the temperature has dropped. This particular box
Martin Rogers wrote:
> Tod kindly provided me with a gdb, and ZAP looks like it is the problem
> area. However I think I need a version of Astlinux 0.6.2 which is
> compiled with debug symbols before I can go any further.
>
> (gdb) bt full
> #0 0x0809c1fb in ast_frame_free ()
> No symbol table in
Tod kindly provided me with a gdb, and ZAP looks like it is the problem
area. However I think I need a version of Astlinux 0.6.2 which is
compiled with debug symbols before I can go any further.
(gdb) bt full
#0 0x0809c1fb in ast_frame_free ()
No symbol table info available.
#1 0x40322504 in ??
19 matches
Mail list logo
