, 30 Jun 2009 12:18:10
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Astlinux on SATA disk
Nope, I didn´t enable it. I thought it was enabled by default. How should I
enable it?
Regards,
Benny
--
From: "Stephan Monette&q
> --
>> From: "Darrick Hartman (lists)"
>> Sent: Wednesday, June 24, 2009 12:02 AM
>> To: "AstLinux Users Mailing List" > >
>> Subject: Re: [Astlinux-users] Astlinux on SATA disk
>>
>>> I
; To: "AstLinux Users Mailing List" >
> Subject: Re: [Astlinux-users] Astlinux on SATA disk
>
>> I'm pretty sure we extended support for SATA devices in trunk.
>> Eventually we'll have that ready to test then release. Most people
>> who
>> are
bject: Re: [Astlinux-users] Astlinux on SATA disk
> I'm pretty sure we extended support for SATA devices in trunk.
> Eventually we'll have that ready to test then release. Most people who
> are using Astlinux are installing it on a CF card and not using SATA
> devices.
2:02 AM
To: "AstLinux Users Mailing List"
Subject: Re: [Astlinux-users] Astlinux on SATA disk
> I'm pretty sure we extended support for SATA devices in trunk.
> Eventually we'll have that ready to test then release. Most people who
> are using Astlinux are instal
I'm pretty sure we extended support for SATA devices in trunk.
Eventually we'll have that ready to test then release. Most people who
are using Astlinux are installing it on a CF card and not using SATA
devices. It is something we want to support though.
Trunk already has a much newer kernel
Sorry,
I meant to refer to kernel 2.6.26.8 where we have the realtime timers
working fine.
In my previous email I refer to 2.6.24 which is wrong.
Thanks again.
Stephan Monette
Unlimitel Inc.
Tel.: 1-877-464-6638, x221
Fax: (613) 482-1077
On 23-Jun-09, at 4:22 PM, Benny Strömberg wrote:
Hey,
From what I remember up to version 6.3, the default kernel does not
have the modules for SATA interface.
Since most systems now runs on SATA disk, CD/DVD-ROM and SATA solid
state disks, I think it would be a good idea to have the modules for
SATA interface enabled by default in both
Hi,
I tried to install Astlinux on a SATA (sda) disk but I got the following error
message when booting the first time:
Runnix device not found
/bin/sh: can't access tty: job control turned off
I have seen that several users are having the same issue but I haven´t seen any
solution. Is there
