>This has taken a bit of work. Trying to install a Berofix card into a
>net5501 running Astlinux 0.6.7. This is what I've done:
Nice that it works now.
>Notes:
>
>Step 1: Though installed on a net5501, the net5501 0.6.7 Astlinux
>build doesn't have the 8139too driver - do I understand it is under
On Oct 14, 2009, at 12:03 PM, Michael Keuter wrote:
>> Step 7: IP forwarding is required to get the card working properly -
>> can anyone tell me if enabling it is A Bad Thing in any way? The
>> other
>> Berofix approach is to use a bridge rather than ip forwarding, but
>> since I'm not sure th
> >> Step 7: IP forwarding is required to get the card working
> properly -
> >> can anyone tell me if enabling it is A Bad Thing in any way? The
> >> other Berofix approach is to use a bridge rather than ip
> forwarding,
> >> but since I'm not sure this is directly supported in the Astlinux
> >> G
On Oct 15, 2009, at 4:32 AM, Tom Chadwin wrote:
>> This will work if the 8139too module is enabled in
>> /etc/rc.modules, but if "modprobe 8139too" is called in
>> /mnt/kd/rc.elocal the BRIDGE0 variable won't work as expected
>> if any of the bridged interfaces are not defined until
>> /mnt/kd/rc.
On 10/15/2009 10:09 AM, Lonnie Abelbeck wrote:
> On Oct 15, 2009, at 4:32 AM, Tom Chadwin wrote:
>
>>> This will work if the 8139too module is enabled in
>>> /etc/rc.modules, but if "modprobe 8139too" is called in
>>> /mnt/kd/rc.elocal the BRIDGE0 variable won't work as expected
>>> if any of th
> >>> This will work if the 8139too module is enabled in
> /etc/rc.modules,
> >>> but if "modprobe 8139too" is called in /mnt/kd/rc.elocal
> the BRIDGE0
> >>> variable won't work as expected if any of the bridged
> interfaces are
> >>> not defined until /mnt/kd/rc.elocal is called. Advanced
> user
> Before I start trying to get the bridge approach to work,
> I'll try to finish the IP forwarding method. Currently
> working only on outgoing calls. The destination phone rings,
> but I hear no ringing tone in my SIP phone, and, once the
> call is answered, I get no audio either way.
> Any ideas
> -Original Message-
> From: Philip A. Prindeville
> [mailto:philipp_s...@redfish-solutions.com]
> Sent: 16 October 2009 03:15
> To: astlinux-users@lists.sourceforge.net
> Subject: Re: [Astlinux-users] Getting Berofix to work in
> net5501 with Astlinux 0.6.7
>
> I shall try to get a bridge up and running today.
OK, I think the bridge is up and running. eth0 and eth4 are br0
10.4.0.4. The internal IP address of the Berofix is 10.4.0.5. I can
ping 10.4.0.4 from another host on the LAN. I can ping 10.4.0.5 from
the Astlinux box. However, I cannot ping 10.4
On 10/23/2009 04:31 AM, Tom Chadwin wrote:
>> -Original Message-
>> From: Philip A. Prindeville
>> [mailto:philipp_s...@redfish-solutions.com]
>> Sent: 16 October 2009 03:15
>> To: astlinux-users@lists.sourceforge.net
>> Subject: Re: [Astlinux-users] G
lawful
purposes.
-Original Message-
>>> From: Philip A. Prindeville
>>> [mailto:philipp_s...@redfish-solutions.com]
>>> Sent: 16 October 2009 03:15
>>> To: astlinux-users@lists.sourceforge.net
>>> Subject: Re: [Astlinux-users] Getting Berofix to wo
> Apologies for ridiculous long work sig. Now juggling accounts to rid
> myself (and you) of it.
Tom
--
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend
> This will work if the 8139too module is enabled in
>> /etc/rc.modules,
> but if "modprobe 8139too" is called in /mnt/kd/rc.elocal
>> the BRIDGE0
> variable won't work as expected if any of the bridged
>> interfaces are
> not defined until /mnt/kd/rc.elocal is called. Advanced
>>
All went well on-site, so it's now in production. For others who might
want to use the Berofix (in a net5501), here is the procedure:
1. Boot the geni586 image without the Berofix installed
2. Use the Astlinux GUI to add the following to user.conf:
BRIDGE0="eth0 eth1"
3. Install the Berofix, re
On Oct 29, 2009, at 6:06 AM, Tom Chadwin wrote:
> All went well on-site, so it's now in production. For others who might
> want to use the Berofix (in a net5501), here is the procedure:
>
> 1. Boot the geni586 image without the Berofix installed
>
> 2. Use the Astlinux GUI to add the following to
>All went well on-site, so it's now in production. For others who might
>want to use the Berofix (in a net5501), here is the procedure:
>
>1. Boot the geni586 image without the Berofix installed
>
>2. Use the Astlinux GUI to add the following to user.conf:
>
>BRIDGE0="eth0 eth1"
>
>3. Install the B
Yes, I realized I hadn't clarified, and that you were talking of
external interfaces - no matter. The other approaches sound good, too,
but hopefully this will do us for the mo.
> Are you happy with the ISDN features, is the speech quality OK?
Speech quality good. Echo totally gone. Only problem
Just an extra bit of info required to make this work, as I discovered
on my second install - see inserted step 3a below:
> For others who might
> want to use the Berofix (in a net5501), here is the procedure:
>
> 1. Boot the geni586 image without the Berofix installed
>
> 2. Use the Astlinux GUI t
18 matches
Mail list logo
