Hi Bob,
if you want to play, I can send you login to the remote desktop of this
kind of toy - RS ESPI7
http://www2.rohde-schwarz.com/product/ESPI.html. It is test receiver
(for measuring very weak signals in the EMG compatibility tests
measurements) and spectrum analyzer up to 7GHz. As
On Saturday 06 March 2010 08:36:14 Lukáš Turek wrote:
I hit this too when I did the measurement and had the pigtail connected to
the wrong connector. There is currently no TX antenna setting in Ath5k, so
I had to hardcode it in the call to ath5k_hw_set_antenna_mode().
in my tests this was not
Betreff: Re: [ath5k-devel] Tx power support
Kornelius Dridger kdrid...@mail.uni-paderborn.de writes:
Hi guys,
according to [1] the card transmits on some standard power levels.
Can you tell me more about these power levels and how to set them?
To me, I can adjust the TX power
Kornelius Dridger kdrid...@mail.uni-paderborn.de writes:
Hi guys,
according to [1] the card transmits on some standard power levels.
Can you tell me more about these power levels and how to set them?
To me, I can adjust the TX power with the help of iwconfig (change
wlan0 to whatever
On 5.3.2010 20:24 Luis R. Rodriguez wrote:
txpower is the only command left to add to iw to be able to tell
people to drop iwconfig completely. I was going to do it but have
other things to take care of right now. If someone can take over
that'd be nice. Attached is what I had left.
I was
On Fri, Mar 05, 2010 at 09:08:55PM +0100, Luk Turek wrote:
I was looking at the TX power setting recently. However, before adding the
userspace bits I need to fix the low level stuff so that the real TX power
matches what is set via iwconfig.
I did some measurements with a spectrum
On 5.3.2010 23:43 Bob Copeland wrote:
If you have access to the kind of RS analyzer used here, please share :)
http://bugzilla.kernel.org/show_bug.cgi?id=14566
I think this happens because the card switches output connectors (miniPCI
cards have two antenna connectors). We had this problem even
Hi guys,
according to [1] the card transmits on some standard power levels.
Can you tell me more about these power levels and how to set them?
Thanks Regards,
Kornelius Dridger
[1] http://linuxwireless.org/en/users/Drivers/ath5k
