My suggestion was actually for a different part of the manual then the
patch that Arno has written is for. I was imagining it being placed as
another subsection in the Getting Started with Bacula section under the
subsection, Understanding Pools, Volumes and Labels (maybe call it
Understanding
Hello Maria,
Thanks for your contribution. I'll take a careful look at it and the
placement you specified and get back to you a little later. Since it is an
addition, rather than a change, it should be quite easy for me to fit it
in ... :-)
On Monday 03 October 2005 09:51, Maria McKinley
Maria McKinley wrote:
> Since Phil couldn't tell me what does happen when there are two jobs at
> the same time with the same priority, I haven't changed added that, but
> would be glad to if someone else knows.
I remember scouring the manual for this, and couldn't find a definitive
answer. There
Hello,
On 03.10.2005 03:04, Dirk grosse Osterhues wrote:
Hej,
I'd like to build a schedule for the following scenario:
- 3 tapes for a full backup once a week (WEEKLY), say friday evening
- 2 tapes each for incremental backups of one week (DAILY); e.g. monday
to thursday evening
The DAILYs s
Hi,
On 03.10.2005 07:00, Mr. Bush wrote:
We are setting up Bacula as a second level of backups and I have a quick
questions about pools and defining storage.
As mentioned this is a second level backup so it will be all disk
backup. What I can't seem to find is how to limit the size of a poo
> On Mon, 03 Oct 2005 10:48:17 +0800, Anwar Ahmad <[EMAIL PROTECTED]> said:
Anwar> Hi Everyone,
Anwar> I'm kinda new at using Bacula. I'm maintaining an existing system
right
Anwar> now.
Anwar> I'm currently looking at trying to cancel a scheduled job. Basically
the
Anwar> job
Hello,
On 02.10.2005 17:50, Drew Tomlinson wrote:
I'm still stuck on this. Any attempts to eject the tape with 'mt' or
'camcontrol' result in 'device busy' errors. Thus I assume that
bextract has a hold of the device and won't let the tape eject. Is
there some config or command line option
Hi,
On 02.10.2005 03:50, Diogo Melo wrote:
I've read the definition from the Bacula manual for the differential
backups and incremental backups. If I could undertand, when we do a full
backup and after that a incremental backup and so a differencial backup,
this last one permit us to do no
Hello,
On 01.10.2005 20:58, Thomas E. Ruth wrote:
Hello,
I am having difficulty getting one of my job definitions to work right.
I have a setup of daily/weekly jobs which use the same job resource, to
run at most 10 jobs at once. This is working most of the time. I
cut-n-paste that job defi
Hello List,
Have been using Tandberg SDLT320 drive with and SUSE's SLES9
boxes successfully for a month now. Just in case any-one was wondering
it'll work or not. Will soon be trying out HP 's Ultrium Tapes on the
expense of our Big Fat Banking Client offcourse.
Very nice stuff KERN, keep it up.
Erik Pinzon thechildrenstrust.org> writes:
>
> 16-Feb 01:07 infra2-dir: Infra2.2005-02-16_01.05.00 Fatal error:
> sql_create.c:683 sql_create.c:683 insert INSERT INTO Filename (Name)
> VALUES ('Creación.wav') failed:
> ERROR: Unicode characters greater than or equal to 0x1 are not
> sup
Hello,
On 01.10.2005 19:02, Georg Lutz wrote:
Hi,
is it normal, that with autolabeling function (option "Label Format"), a
database entry for the tape is created even if no tape has been labeled
physically?
It is normal, although, in my opinion, not really good.
We always use new tapes for
hi,
I have been looking for a Network backup solution for quite some time
now. I came across Bacula and c that it does fulfill quite a few of my
requirements. I am looking to implement this solution in a live production
environment. I have been experimenting with it for some time now and had
some
On Monday 03 October 2005 13:04, Syed Ali Saim wrote:
> Hello List,
> Have been using Tandberg SDLT320 drive with and SUSE's SLES9 boxes
> successfully for a month now. Just in case any-one was wondering it'll work
> or not. Will soon be trying out HP 's Ultrium Tapes on the expense of our
> Big Fa
Russell Howe wrote:
Maria McKinley wrote:
Since Phil couldn't tell me what does happen when there are two jobs at
the same time with the same priority, I haven't changed added that, but
would be glad to if someone else knows.
I remember scouring the manual for this, and couldn't find
Hi,
I have the following backup strategy:
Schedule {
Name = "WeeklyCycle"
Run = Full 1st mon at 20:00
Run = Full 2nd mon at 20:00
Run = Full 3rd mon at 20:00
Run = Full 4th mon at 20:00
Run = Differential tue-fri at 20:00
}
Every monday I make a full backup in different tapes, and f
After doind the changes, occurs this error:
Starting Bacula Storage daemon: bacula-sd: ERROR TERMINATION at
parse_conf.c:768
Config error: Keyword "MaximumPartSize" not permitted in this resource.
Perhaps you left the trailing brace off of the previous resource.
: line 79, col 18 of
Hello Trying to get bacula running on freebsd with a sony SDX 500c
tape drive. My nightly backup are failing with the following messages:
29-Sep 11:50 vni-dir: Start Backup JobId 134,
Job=backup.gaoler.2005-09-29_11.50.23
29-Sep 11:58 gaoler-fd: backup.gaoler.2005-09-29_11.50.23 Fatal error:
job.
The same error continues after upgrade to bacula 1.36.
Wanderson Berbert wrote:
I think I solved the problem...
I will confir as soon as possible.
Wanderson
Wanderson Berbert wrote:
After doind the changes, occurs this error:
Starting Bacula Storage daemon: bacula-sd: ERROR TERMINATION at
I think I solved the problem...
I will confir as soon as possible.
Wanderson
Wanderson Berbert wrote:
After doind the changes, occurs this error:
Starting Bacula Storage daemon: bacula-sd: ERROR TERMINATION at
parse_conf.c:768
Config error: Keyword "MaximumPartSize" not permitted in this re
Hi,
Some of you know how can I delete finalized jobs from the log? When whe
use command "status dir", I can check that the finalized jobs are still
there. Is there a way to delete this information?
Regards.
Marcelo
###
Luis Marcelo Ac
Hello,
Did you ever get an answer to this? If not it is a real pity. In any case,
beginning in November, I will be making a new Wish List, and this item will
probably be on in, if not, please submit it. Then maybe we can make some
progress toward what you want ...
On Thursday 01 September 2
Hello,
please reply to the list.
My comments are inline.
On 03.10.2005 18:50, Dirk grosse Osterhues wrote:
Arno Lehmann wrote:
Hello,
On 03.10.2005 03:04, Dirk grosse Osterhues wrote:
Hej,
I'd like to build a schedule for the following scenario:
- 3 tapes for a full backup once a week
Hi,
On 03.10.2005 20:06, Kern Sibbald wrote:
Hello,
Did you ever get an answer to this? If not it is a real pity. In any case,
beginning in November, I will be making a new Wish List, and this item will
probably be on in, if not, please submit it. Then maybe we can make some
progress tow
Hello,
Recently, we discussed on this list my "Open Source Funding" idea. In
summary, I thought it would be fair to change the binary license to require
for-profit organizations to pay for binary copies of Bacula code that we
prepare and they download. The purpose was to collect money to be a
I also have have learned I have to stop bacula (likely the bacula-sd daemon) to use either 'mt -t /dev/st0 COMMAND' or 'btape ... ' for testing. It appears that bacula has the device in use because I defined it already in the bacula-sd.conf file. It is likely documented some where but I didn't see
Hello,
On 03.10.2005 19:57, Luis Marcelo Achite wrote:
Hi,
Some of you know how can I delete finalized jobs from the log? When whe
use command "status dir", I can check that the finalized jobs are still
there. Is there a way to delete this information?
I assume that you mean the list of the
Hello,
On 03.10.2005 21:00, Dean Waldow wrote:
I also have have learned I have to stop bacula (likely the bacula-sd
daemon) to use either 'mt -t /dev/st0 COMMAND' or 'btape ... ' for
testing. It appears that bacula has the device in use because I defined
it already in the bacula-sd.conf file.
You've probably already tried this, but I have had a problem
occasionally before of getting the device busy error when trying to use
mt-st, and just stopping the bacula daemons has gotten rid of it. Worth
a shot, anyhow, if you haven't tried already. Doesn't answer the rest
of your question,
Hello,
On 03.10.2005 12:47, Luis Marcelo Achite wrote:
Hi,
I have the following backup strategy:
Schedule {
Name = "WeeklyCycle"
Run = Full 1st mon at 20:00
Run = Full 2nd mon at 20:00
Run = Full 3rd mon at 20:00
Run = Full 4th mon at 20:00
Run = Differential tue-fri at 20:00
}
E
On 2005-10-03, Arno Lehmann wrote:
>
> >What can I do now? Bacula thinks that there is a tape Monat-0003. I
> >suppose I have to tweak the database manually (delete Monat-0003).
> >
>
> You can either mark that volume as Used or, better, Error. Or you can
> delete it from the catalog: delete med
Hello,
I ran into an issue over the weekend where my tape library didn't know
which slot to return a tape in the drive. I have a Qualstar RLS-8236
tape library - 2 LTO tape drives 36 tape slots.
I believe mtx -f ... status for the drives returned "Unknown Storage
Element" so when mtx-changer aske
Hello,
On 03.10.2005 22:29, Tom Boyda wrote:
Hello,
I ran into an issue over the weekend where my tape library didn't know
which slot to return a tape in the drive. I have a Qualstar RLS-8236
tape library - 2 LTO tape drives 36 tape slots.
I believe mtx -f ... status for the drives returned "
Arno Lehmann wrote:
> please reply to the list.
Sorry for that, missed the button.
> I didn't mention it, but you should use two pools. One for the weekly
> full backups with volume use duration set, and one for the daily jobs
> which probably can cycle without any intervention or replacement.
>
On 10/3/2005 12:27 PM Arno Lehmann wrote:
Hello,
On 03.10.2005 21:00, Dean Waldow wrote:
I also have have learned I have to stop bacula (likely the bacula-sd
daemon) to use either 'mt -t /dev/st0 COMMAND' or 'btape ... ' for
testing. It appears that bacula has the device in use because I
de
I've been searching the archive and it looks like I'm not the only
one confused by pool behavior. I apologize if this is redundant but I
can't seem to find an authoritative answer.
My goal is simple: put all Full backups in the Full pool, put all
Differentials in the Differential pool and p
36 matches
Mail list logo