Hi all
I am new user of bacula,
I have installed bacula2.2.6 on RHEL4, along with the bacula-gui,
I installed these and created the database by running the scripts,
then i opened test.php on the browser, it runs fine,
but when i tried index.php, following error message displayed
"DB Error
Hi Michael,
On Dienstag 18 Dezember 2007 23:46:26 wrote:
> Hey guys, over the past week I have been attempting to restore to a
> windows client with 512mb ram and no pagefile only to be frustrated
> with "There is not enough storage to complete this operation". After
> some searches this error see
Hey guys, over the past week I have been attempting to restore to a
windows client with 512mb ram and no pagefile only to be frustrated
with "There is not enough storage to complete this operation". After
some searches this error seems to mean I've run out of memory! This is
a virtual machine with
Hi Gary,
On Dienstag 18 Dezember 2007 21:43:01 wrote:
> I am sure SOMEONE here has come across this scenario. I have a
> top-level directory that is ~21 TB. In it are 391 other directories
> making up that 21 TB. Unfortunately, one of them alone is 15 TB. My
> goal is to split the directories some
Had to eject the tape the re-insert the cartridge for Bacula to decide to
overwrite the tape. Bacula seems to be happily re-writing the tape.
In the meantime, I am restoring my previous configuration.
Final question...once the migration is complete, can I then move the tape back
into my "Weekly
Hey gang,
Now this migration is becoming a headache.
I reread the migration section of the manual and though it does not
specifically say "Do not migrate within a pool!", it does discourage the act.
With that, I created the "Tape" pool and moved one of my tapes from the Weekly
pool into the "
I am sure SOMEONE here has come across this scenario. I have a
top-level directory that is ~21 TB. In it are 391 other directories
making up that 21 TB. Unfortunately, one of them alone is 15 TB. My
goal is to split the directories somewhat evenly four ways so that
each tape drive is backing up the
Hi,
18.12.2007 19:36,, [EMAIL PROTECTED] wrote::
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> hi,
> I've try to configure the Catalog in bacula-dir.conf but I get this error:
>
> 18-Dec 19:30 bacula-dir: Fatal error: Version error for databas
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hi,
I've try to configure the Catalog in bacula-dir.conf but I get this error:
18-Dec 19:30 bacula-dir: Fatal error: Version error for database
"bacula". Wanted 9, got 0
18-Dec 19:30 bacula-dir: Fatal erro
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
If you check the manual, you will see you must migrate to a different
pool. If my reading of that section was incorrect, please someone let me
know.
David Gardner wrote:
> hey gang,
>
> I ran a job last night that inadvertantly went to "file" instead
hey gang,
I ran a job last night that inadvertantly went to "file" instead of "DAT72." I
want to migrate that job in the WeeklyPool to the file fWeekly-0001 to "DAT72"
in the WeeklyPool to tape Weekly-0002 (or whichever tape is mounted) with the
following job:
# Associate VERACRUZ's files with
On Dec 18, 2007 12:24 PM, Coser, Christopher D. (Mission Systems)
<[EMAIL PROTECTED]> wrote:
> One more question, do you happen to know if it is possible to restore
> files form only a backup volume if the SQL database or the bootstrap
> files have been lost?
>
Both are possible. Read up on the fol
On Dec 18, 2007 11:38 AM, Coser, Christopher D. (Mission Systems)
<[EMAIL PROTECTED]> wrote:
>
>
>
> Greetings,
>
> I'm administrating a development network for which I run Bacula as our
> backup system. I have recently noticed that when I attempt to restore files
> from bacula (through the console
Hi,
I'm configuring a Sony TSL A300C tape changer for use with bacula on
FreeBSD, and got stuck on the tar test. It would make the backup, but is
unable to list the backup contents with tar tf.
I've managed to use the sonytape utility to test the drive, and all
tests completed successful. I al
Hi Robin,
On Dienstag 18 Dezember 2007 17:24:30 wrote:
> [EMAIL PROTECTED] ~]# mt -f /dev/nst0 rewind
> [EMAIL PROTECTED] ~]# mt -f /dev/nst0 status
> SCSI 2 tape drive:
> File number=0, block number=0, partition=0.
> Tape block size 0 bytes. Density code 0x44 (no translation).
> Soft error count
Greetings,
I'm administrating a development network for which I run Bacula as our
backup system. I have recently noticed that when I attempt to restore
files from bacula (through the console) from any backup jobs I have a
problem. It seems the system knows that there have been files backed up
but
On Tue, Dec 18, 2007 at 11:24:30AM -0500, Robin Blanchard wrote:
>
> Thanks for the tip. Looks indeed like something underlyingly SCSI here
> (see below). Any suggestions as to what to look for in the adaptec
> controller bios ?
>
have a look around this thread:
http://thread.gmane.org/gmane.com
Robin Blanchard wrote:
>> -Original Message-
>> From: Michael Galloway [mailto:[EMAIL PROTECTED]
>> Sent: Tuesday, December 18, 2007 10:06 AM
>> To: Robin Blanchard
>> Cc: bacula-users@lists.sourceforge.net
>> Subject: Re: [Bacula-users] FW: new to bacula; help w/autochanger
>>
>> On Tue, D
> -Original Message-
> From: Michael Galloway [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, December 18, 2007 10:06 AM
> To: Robin Blanchard
> Cc: bacula-users@lists.sourceforge.net
> Subject: Re: [Bacula-users] FW: new to bacula; help w/autochanger
>
> On Tue, Dec 18, 2007 at 09:15:09AM -050
On Tue, Dec 18, 2007 at 09:15:09AM -0500, Robin Blanchard wrote:
> > [EMAIL PROTECTED] ~]# /usr/local/bacula-2.2.6/sbin/btape -v -c
> > /usr/local/bacula-2.2.6/etc/bacula-sd.conf /dev/nst0
> > Tape block granularity is 1024 bytes.
> > btape: butil.c:285 Using device: "/dev/nst0" for writing.
> > 18
> -Original Message-
> From: Dan Langille [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, December 18, 2007 9:36 AM
> To: Robin Blanchard
> Cc: bacula-users@lists.sourceforge.net
> Subject: Re: [Bacula-users] FW: new to bacula; help w/autochanger
>
> Robin Blanchard wrote:
> >>> [a lot of old s
could you please post the entire output from btape test?
-- michael
On Tue, Dec 18, 2007 at 08:59:30AM -0500, Robin Blanchard wrote:
> > > [a lot of old stuff snipped]
> > >
> > > I think you are now asking for help with the above messages, but you
> > > haven't explicitly asked.
> > >
> > > Wh
Robin Blanchard wrote:
>>> [a lot of old stuff snipped]
>>>
>>> I think you are now asking for help with the above messages, but you
>>> haven't explicitly asked.
>>>
>>> When running btape, be sure bacula-sd is not running. That is your
>>> firstcheck.
>> The second check would be the permissions
Jon Ingason wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Dan Langille skrev:
>> Jon Ingason wrote:
>>> -BEGIN PGP SIGNED MESSAGE-
>>> Hash: SHA1
>>>
>>> Dan Langille skrev:
Jon Ingason wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> I have
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:bacula-users-
> [EMAIL PROTECTED] On Behalf Of Robin Blanchard
> Sent: Tuesday, December 18, 2007 9:00 AM
> To: bacula-users@lists.sourceforge.net
> Subject: Re: [Bacula-users] FW: new to bacula; help w/autochanger
>
> > > [a lot of ol
> > [a lot of old stuff snipped]
> >
> > I think you are now asking for help with the above messages, but you
> > haven't explicitly asked.
> >
> > When running btape, be sure bacula-sd is not running. That is your
> > firstcheck.
>
> The second check would be the permissions. If the SD runs as u
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dan Langille skrev:
> Jon Ingason wrote:
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> Dan Langille skrev:
>>> Jon Ingason wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a scenario where I have client which
Hi,
the Job ist scheduled to 01:00 o´clock, but starts at 09:39.
Try to increase the "Client Connect Wait" in the storage daemon resource.
I have had the same problem. With Client Connect Wait = 18000 the
problem was gone.
Greetings,
Daniel
Junior Cunha wrote:
> Hello All,
>
>I have been h
Hello All,
I have been had some problems since when i upgrade bacula from
2.2.4-1 to the last version ( 2.2.6-1 ). Here is my scenario:
Bacula Director and Storage version 2.2.6-1 ( rpm ) running in a
CentOS 5.0 box and MySQL. The clients ( around 140, all over internet
running under ssh tu
Mandi! Arno Lehmann
In chel di` si favelave...
> > ...i'm using 'file' storage, so... i can simply ignore 'mount' type
> > messages?
> I wouldn't do this, because you might miss messages when a pool is
> full and you need to create new volumes.
I've just hit one of them, and i've seen that i r
Hi,
18.12.2007 10:38,, Marco Gaiarin wrote::
>> I've total control on the bacula director, that is also my mail server,
>> so i can do this, but indeed it is not so clean... ;(((
>
> ...i'm using 'file' storage, so... i can simply ignore 'mount' type
> messages?
I wouldn't do this, because you m
> I've total control on the bacula director, that is also my mail server,
> so i can do this, but indeed it is not so clean... ;(((
...i'm using 'file' storage, so... i can simply ignore 'mount' type
messages?
--
dott. Marco Gaiarin GNUPG Key ID: 240A3D66
Assoc
Hello,
13.12.2007 16:51,, Daniel Bareiro wrote::
> On Thursday, 13 December 2007 09:58:55 +0100,
> Arno Lehmann wrote:
>
>> Hi,
>
> Hi Arno. Thanks for your response.
>
>>> This is my first mail to the list. I'm newbie with Bacula.
>
>> I noticed that, when looking at the configuration ;-)
>
Hello,
18.12.2007 00:47,, pedro moreno wrote::
> Hi.
>
>I have been working with some tapes for some months, i was
> wondering how much data my tape have been writing && erasing.
>
>I use the command query option 16 and receive this data:
>
> +---+++-
34 matches
Mail list logo
