Thanks guys, bls helped me out :)
In fact, when I was waiting for an answer, I found bls myself :)
I am going to give a look at bscan.
*Sorry for my English...
+--
|This was sent by tijshooyber...@hotmail.com via Backup
Op 20110428 om 12:53 schreef Roy Sigurd Karlsbakk:
I have a problem with a Windows 2003 server where backup is
interrupted quite often. I only see the problem on this machine
(dev0), but the error looks more like an SD failure. This SD is in
use for several other backups, which work well.
Op 20110502 om 17:09 schreef John Drescher:
2011/5/2 Stephens, Bill {PBSG} bill.steph...@pepsico.com:
I have remote servers set up in a single server configuration,
meaning each server runs the director, sd, and fd. The remote
servers have their own removable drives to store the backups.
On Fri, 29 Apr 2011 14:29:33 +0200, Dietz Pröpper said:
To see wether the file system is indeed the bottleneck you could try to tar
the fs to /dev/null and compare the transfer rate to that of your bacula
backup.
Good advice, but beware that GNU tar doesn't read any files when the output
Op 26-04-11 16:51, Josh Fisher schreef:
On 4/26/2011 5:10 AM, Koenraad Lelong wrote:
...
Hi,
I started from scratch again.
The partition itself must also have the correct owner and permissions.
It should look like:
# ls -la 49299ccc-6489-43f8-9536-d63dd3de9663
drwxrwx--- 3 bacula
Hello. I just upgraded from 2.4.4 to 5.0.2 as I upgraded my Debian.
I have a FileStorage on a NAS. Went with full backup, and it backed up
maybe 10 volumes, and then stopped. Asked me to mount a volume or label
a new. So I unmounted, and then tried to mount.
Bacula says:
3901 Unable to open
Restarting bacula-sd forces to restart the costly full backup.
It runs some volumes again, but then asks for a new volume:
03-May 13:52 pallas-sd JobId 1733: User defined maximum volume capacity
4,681,514,352 exceeded on device FileStorage (/backup/bacula).
03-May 13:52 pallas-sd JobId 1733: End
Hi,
whats the best way to have one file (volume) per job but still running
more than one job at once?
if i use use volume once = yes, all other jobs are waiting for storage file.
greetings
juergen
--
WhatsUp Gold -
whats the best way to have one file (volume) per job but still running
more than one job at once?
Use more than 1 storage device.
I recommend using bacula vchanger for that. This will greatly simplify
the setup and increase flexibility.
http://sourceforge.net/projects/vchanger/
John
Hi,
I have the following problem after shutdown of server:
Error: Unable to position to end of data on device LTO3
(/dev/nst0): ERR=dev.c:895 ioctl MTEOM error on LTO3 (/dev/nst0).
ERR=Input/output error.
03-May 09:39 supernoc-sd JobId 3491: Marking Volume MARMAR11LTO3 in
Error in Catalog.
Hi everybody.
I am not able to run 2 bacula jobs from 2 different clients at the same
time.
As described in the bacula concepts documentation I created for both
clients
an own device in the sd.conf files.
Then I created for both client an own storage and an own pool in the
dir.conf files
Hi everybody.
Sorry, but I had in the bacula-dir.conf file the parameter Maximum
Concurrent Jobs set to 1.
Now I changed it to 100 and not it works.
Best regards
Robert
From: Robert Kromoser
Sent: Dienstag, 03. Mai 2011 14:52
To: 'bacula-users@lists.sourceforge.net'
Subject:
On 5/3/2011 5:55 AM, Koenraad Lelong wrote:
...
# chmod 770 /mnt/vchanger/49299ccc-6489-43f8-9536-d63dd3de9663/
# ls -la /mnt/vchanger/49299ccc-6489-43f8-9536-d63dd3de9663/
totaal 196768
drwxrwx--- 6 bacula bacula 4096 3 mei 10:36 .
drwxr-xr-x 3 root root 0 3 mei 10:51 ..
So bacula must be looking at this and deciding that it's already backed it up
because the modified attribute is older than the previous backup.
But it doesn't actually check or compare against what it's already backed up.
Is there any way around this?
Hi,
you could use accurate backups:
That looks like exactly the thing I'm looking for, I'm not having much luck
getting it working though. I'm testing on our bacula 5 server with a bacula
5.02 client.
Ignore that, I'm being thick. I should have uninstalled the old bacula client
before installing 5.02
Hello,
In the next few weeks, I will be sending you a Bacula status that I send
roughly once a quarter, but in the mean time, the following may interest you:
One of the key points, from the survey we did earlier this year with Bacula
users, was that most of those who responded would like to
Dear bacula users,
I am running bacula 5.0.3 (x64). Recently my system started to crash the
director when starting copy jobs. The copy job is defined as
Job {
Name = CopyIncr
Type = Copy
Messages = TapeCopy
Pool = Incr
Selection Type = PoolUncopiedJobs
Priority = 10
Schedule =
I'm trying to emulate a FileSet example from the manual:
http://www.bacula.org/5.0.x-manuals/en/main/main/Configuring_Director.html#SECTION00188
Specifically, this example:
An alternative would be to include the two subdirectories desired and exclude
everything else:
FileSet {
On Wednesday 20 April 2011, Dan Langille elucidated thus:
Hi,
My name is Dan, and it's been 16 days since I last touched my
bacula-dir.conf file.
$ ls -l /etc/bacula/
total 57
-rw-rw 1 root bacula 8284 2009-09-16 16:10 bacula-dir.conf
-rw-rw 1 root bacula 8322 2007-07-19 15:12
19 matches
Mail list logo
