Adam Cécile a écrit :
> Hello,
>
> It seems SD behavior changed between 2.X and 3.X.
>
> Here is what I do:
> 1. Unload tape from the drive
> 1. Run a job
> 2. Wait for Bacula to send a mail asking for a tape
> 3. Load a tape in a drive
> 4. Wait, and see that bacula
Media Type = LTO-3
Archive Device = /dev/nst0
AutomaticMount = yes
AlwaysOpen = no
RemovableMedia = yes
RandomAccess = no
Maximum File Size = 4GB
}
Could you help me to figure out what's wrong ? Thanks in advance.
Regards, Adam.
--
Adam Cécile
me names as before ?
>>
>
> Why don't you filter the names in the mtx-changer script?
>
> Best regards,
>
> Wolfgang Denk
>
Thanks Wolfgang and Arno.
I'll patch mx-changer script for now, because I won't be able to rename
all the tape.
Regards, Ada
Hello,
I juste replaced an autochanger and the new one adds L3 at the end of
each tape label (ie: XY becames XYL3).
What can I do to keep the same names as before ?
Thanks in advance,
Regards, Adam.
--
Adam Cécile Mandriva / Linbox
152, rue de
John Jorgensen a écrit :
>>>>>> "adam.cecile" == Adam Cécile writes:
>>>>>>
>
> adam.cecile> Hello, I just upgraded to bacula 3.0.2 and I'm
> adam.cecile> seeing strange messages when backing up an
Hi,
Yes I did. Otherwise I guess the client FD won't run acl_get_file.
Adam.
Mathieu BALCERAK a écrit :
> Hello,
>
> Do you have build your bacula-fd with ACL support ?
>
>
>
>
> Adam Cécile a écrit :
>> Hello,
>>
>> I just upgraded to ba
ance.
Regards, Adam.
--
Adam Cécile Mandriva / Linbox
152, rue de Grigy - Technopole Metz 57070 METZ - FRANCE
tel: +33 (0)3 87 50 87 90http://mandriva.com
--
222-fd: mem_pool.c:370-0 garbage collect memory pool
uc1222-fd: job.c:380-0 Done with free_jcr
--
Adam Cécile Mandriva / Linbox
152, rue de Grigy - Technopole Metz 57070 METZ - FRANCE
tel: +33 (0)3 87 50 87 90
Hi,
I really need help ;)
Moreover, do you think, creating one pool for each week day could be a
good workaround ?
Adam Cécile a écrit :
> Hi,
>
> Here is my problem:
> I have five tapes (Dailly-00[1-5]).
> Let's assume Daily-005 is purged and Daily-001 is used (but data
Hi,
Here is my problem:
I have five tapes (Dailly-00[1-5]).
Let's assume Daily-005 is purged and Daily-001 is used (but data expired).
If Daily-001 is in the drive, Bacula won't recycle it, instead it will
keep asking for Daily-005.
If I set Daily-005 as disabled, bacula automatically purge Daily
Hi,
I use RHEL4.0 ES x86_64, is there any binaries package for it ?
I'm not a Redhat wizard at all, I usually run Debian ;)
Thanks in advance, Adam.
Felix Schwarz a écrit :
> Adam Cécile schrieb:
>
>> I don't understand at all where I can grab bacula rpms.
>>
Marc Schiffbauer a écrit :
> * Adam Cécile schrieb am 10.09.07 um 17:36 Uhr:
>
>> Hi,
>>
>> I don't understand at all where I can grab bacula rpms.
>> I saw fschwarz announce but can't find any RPM anywhere...
>>
>> Help would be appreciate
Hi,
I don't understand at all where I can grab bacula rpms.
I saw fschwarz announce but can't find any RPM anywhere...
Help would be appreciated.
Thanks in advance.
--
Adam CECILELinbox / Free&ALter Soft
152 rue de Grigy tél: +33 3 87 50 87 95
Technopôle Metz
Kern Sibbald a écrit :
> Hello,
>
> Since Beta 2.1.26 Eric and I have made a few changes and fixed a few bugs in
> Bacula and Dirk has made a few updates to bat, so I am thinking of making a
> new beta release today or tomorrow. I will wait to get some feedback from
> Eric concerning a problem
I'm using a Dell PowerVault 132T, two LTO3 drives, 21 slots.
Works fine with bacula 2.0.3 on debian sarge.
Attila Fülöp a écrit :
> Ken Gunderson wrote:
>
>> On Fri, 06 Jul 2007 16:43:48 -0300
>> Heitor Medrado de Faria <[EMAIL PROTECTED]> wrote:
>>
>>
>>> Hi folks,
>>>
>>> Does anyone can
Debian package is well splitted with each package for each bacula
component (dir, sd, fd) and spécific package for db backend.
Marcus Bajohr a écrit :
> Juan Miscaro wrote:
>>
>>> The package build has a dependency for the kde-desktop.
>>> That is all this stuff.
>>> Building it from scratch by c
Hi,
Could you tell me if NTFS alternate data stream (some kind of filesystem
extended attributes) are supposed to work with bacula 2.0.3 ?
See the attached screenshot : restore goes fine but no ads are restored...
Thanks in advance,
Regards, Adam.
--
Adam CECILELinbox / F
An autochanger node should be /dev/sgX
tomasz a écrit :
> Maria McKinley wrote:
>
>> Falk Sauer wrote:
>>
>>> Hi Maria,
>>>
>>>
>>> please make shure that your changer device has the correct permissions eg.:
>>>
>>> crw-rw root disk /dev/sg0
>>>
>>> and for the potentially next
Trac is awesome, looks at some other examples I host :
http://www.museek-plus.org/
http://www.nicotine-plus.org/
http://methlab.thegraveyard.org/
http://trac.aircrack-ng.org/
My corpo:
http://lrs.linbox.org/
http://lds.linbox.org/
If needed, I can give you some help in setting up trac.
Check htt
slots. Bacula will ask what's
in the library through mtx. Then label bardcodes will make bacula load
each tape into the drive and write the bardcode as label. Check with
list media (especially inchanger flag).
Scott McDaniel a écrit :
> How do I do that? I don't see that inside bt
Run update slots, then label barcodes
Scott McDaniel a écrit :
> All,
>
> I am very green to bacula and am trying to configure a Dell PV-132T with
> a single LTO-3 drive attached to a Debian Etch server. My problem comes
> when running the btape fill test across multiple tapes. The first tape
Lucio Crusca a écrit :
> I'd like configure Bacula so that it turns off the computer after the SD has
> finished writing the backup. I'm running Debian GNU/Linux and Bacula 2.0.3.
> Is there a way to do that?
>
>
RunAfterCmd ?
--
Adam CECILELinbox / Free&ALter Soft
152 ru
I guess you have only changed the configuration files, now you need to
update the sql catalog.
Do update => volume parmeters => all volume from pool (and select the
pool you changed the retention).
Jordi Moles a écrit :
> hi,
>
> until last week i used to have volume retention set to 18 days. I
>
Hello,
Is there anyway to only restore content of an incremental backup,
without restoring the whole full backup before?
Thanks in advance.
--
Adam CECILELinbox / Free&ALter Soft
152 rue de Grigy tél: +33 3 87 50 87 95
Technopôle Metz 2000 fax: +33 3
I'm thinking about creating an admin job that parse volumes list and
mark all volumes not in changer as used. What would happened with bacula
then ? Does volumes with status "used" but without any recent writing
dates will be recycled according to their last written date ?
Adam
cula
haven't looked a inchanger flag because the device wasn't an autochanger...
Any other pointers ?
May I run two different SD ? (maybe without having "always open = on")
Arno Lehmann a écrit :
> Hi,
>
> well, I think this problem is understood now :-)
>
> On 5
On Debian, bacula build depends on libssl-dev. Check your distro
packages manager and install ssl headers.
Jorge González a écrit :
> Adam Cécile escribió:
>
>> Some SSL headers missing ?
>>
>>
> I think so but I'm not a programmer :
Some SSL headers missing ?
Jorge González a écrit :
> hi all!
>
> ok, I applied the patchs
> (http://article.gmane.org/gmane.comp.bacula.user/27144/match=check+bacula)
> and got new errors (output trunked):
>
> ==>E/ntering directory /usr/local/src/bacula-2.0.3/src/check_bacula
> make[1]
I "may" have found my problem :
Here is my old setup :
### SD config:
Autochanger {
Name = Dell-PV132T
Device = ULTRIUM-TD3-1
Device = ULTRIUM-TD3-2
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg2
}
Device {
Name = ULTRIUM-TD3-1
Drive Ind
me status:
000147 on device "ULTRIUM-TD3-1" (/dev/nst0)
What happens when jobs start:
Nothing; bacula ask me to mount the volume it scheduled the jobs on
Could you tell me more about which informations could I give you while
running in debug mode ?
Thanks a lot for your help.
Hi,
>
> On 5/21/2007 10:33 AM, Adam Cécile wrote:
>
>> Andreas Helmcke a écrit :
>>
>>> On 21.05.2007 08:55, Adam Cécile wrote:
>>>
>>>
>>>> Arno Lehmann a écrit :
>>>>
>
Andreas Helmcke a écrit :
> On 21.05.2007 08:55, Adam Cécile wrote:
>
>> Arno Lehmann a écrit :
>>
>>> Hello,
>>>
>>> On 5/18/2007 9:02 AM, Adam Cécile wrote:
>>>
>>>
>>>> Hi,
>>>>
>>&g
Arno Lehmann a écrit :
> Hello,
>
> On 5/18/2007 9:02 AM, Adam Cécile wrote:
>
>> Hi,
>>
>> Today my director was blocked.
>> It was asking for a volume which had inchangler flag set to no while
>> there was 4 purged volume in the right pool.
>>
ger address=srv-mpp-lrs SDport=9103 MaxJobs=2
DeviceName=Dell-PV132T MediaType=LTO3 StorageId=2
--> Pool: name=Weekly PoolType=Backup
use_cat=1 use_once=0 acpt_any=1 cat_files=1
max_vols=0 auto_prune=1 VolRetention=25 days
VolUse=0 secs recycle=1 LabelFormat=Weekly-
Bri
S4
> unmount storage=X
> unmount storage=Y
> END_OF_DATA
>
> sleep 120
>
> /usr/sbin/bconsole -c /etc/bacula/bconsole.conf < mount storage=DLT-S4
> mount storage=X
> mount storage=Y
> END_OF_DATA
>
> In the morning, I only have to collect the tapes from the lib
Hi,
Today my director was blocked.
It was asking for a volume which had inchangler flag set to no while
there was 4 purged volume in the right pool.
I had to load the volume into the drive manually (with mtx) and then
mount it, otherwise bacula keeps asking for the missing volume.
How could this
Andreas Helmcke a écrit :
> On 14.05.2007 09:40, Adam Cécile wrote:
>
>> All weeks I need to unload all tapes from drives to the library, so all
>> tapes can be removed from the Autochanger easily.
>> However, when I do "umount", device is marked as BLOCKED and
Hi,
All weeks I need to unload all tapes from drives to the library, so all
tapes can be removed from the Autochanger easily.
However, when I do "umount", device is marked as BLOCKED and no more
jobs run until I mount the drive again.
What's the right way to eject all tapes without blocking drives
Hey,
I have another question, related to this one...
Can i backup fork ressources on a Windows 2000 server (forks are
supported by this server) ?
Justin Lott a écrit :
> Hello Everyone,
>
> I've only just joined the ML so forgive me if I missed this issue
> being covered in the list archives at
Hi,
I'm really interrested in having more infos about it.
I would know is there's anyway to backup fork ressources (like mac
aliases) from a Windows 2000 server NAS.
Regards, Adam.
Adam Compton a écrit :
> Hello,
>
> I am having issues with restoring Mac OS X resource forks stored on a
> HFS+
Hi,
Could you tell me approximately the duration of bscan -m on a nearly
full LTO3 tape ?
Thanks in advance.
--
Adam CECILELinbox / Free&ALter Soft
152 rue de Grigy tél: +33 3 87 50 87 95
Technopôle Metz 2000 fax: +33 3 87 75 19 26
57070 ME
acula you run and how
> your device and jobs are set up now.
>
> Anyway, I guess adding 'prefer mounted volume=no' to the schedules
> might be worth a try.
>
> I haven't investigated if that is possible, though.
>
> Arno
>
> On 3/13/2007 5:36 PM, Adam Cé
Adam Cécile a écrit :
> Michael Proto a écrit :
>
>> Adam Cécile wrote:
>>
>>> Hello,
>>>
>>> Due to speed requirement I use both two drives of my PV132T to run full
>>> weekly backups.
>>> However, I made daily incremen
Michael Proto a écrit :
> Adam Cécile wrote:
> > Hello,
>
> > Due to speed requirement I use both two drives of my PV132T to run full
> > weekly backups.
> > However, I made daily incremental backups too, on monday to tuesday and
> > now two tapes are req
Hello,
Due to speed requirement I use both two drives of my PV132T to run full
weekly backups.
However, I made daily incremental backups too, on monday to tuesday and
now two tapes are required (due to the use of both drives).
Is there anyway to limite incremental backups to one drive ?
Thanks in
r:
../../filed/job.c:1751 Bad response to Append Data command. Wanted 3000 OK data
, got 3903 Error append data
=> Backup Error
Maximum Concurrent HJobs are set to two for both director and storage. It seems
the first jobs (Backup-srv-mpp-datas-Echange_MEDIA)
starts but doesn't see there
Check permissions on /dev/nst0.
Alfonso Amato - Sintecnos srl a écrit :
> While setting up Bacula and following "Brief Tutorial", I see a strange
> problem: after the command "run" asking me for labelling the tape, I
> give the command "label", and bconsole gets lock for some 2 minutes,
> than
Hello,
I'm wodering is there's a good way to translate bacula's emails.
Could you tell how can I do this ?
Thanks in advance,
Best regards, Adam Cécile.
--
Adam CECILELinbox / Free&ALter Soft
152 rue de Grigy tél: +33 3 87 50 87 95
T
Kern Sibbald a écrit :
> On Tuesday 20 February 2007 10:47, Adam Cécile wrote:
>
>> Hi,
>>
>> Any suggest I could start looking at ?
>>
>
> 1. Run the SD with debug level 100.
>
> 2. Look at doc for PreferMountedVolumes
>
Thanks a lot, it wa
Hi,
Any suggest I could start looking at ?
Regards, Adam Cécile.
Adam Cécile a écrit :
> Hello,
>
> I have set up a bacula installation with a Dell 132T autochanger (/dev/sg2).
> It has two LOT3 drives, /dev/nst0 and /dev/nst1.
> Both drives works fine with the mtx-changer sc
Hello,
I have set up a bacula installation with a Dell 132T autochanger (/dev/sg2).
It has two LOT3 drives, /dev/nst0 and /dev/nst1.
Both drives works fine with the mtx-changer script. Currently backup are
done but only used drive 0. I would like to run jobs on both drive 0 and
1, however when I
51 matches
Mail list logo
