On Wed, Feb 8, 2012 at 3:07 AM, Geert Stappers
wrote:
> Op 20120202 om 18:12 schreef John Drescher:
>> Op 20120202 om 17:40 schreef Marty Frasier:
>> > I GRANTed rights to user bacula for that table and in addition usage
>> > must be granted for the related sequence (
On Wed, Feb 8, 2012 at 9:44 AM, Honia A wrote:
> Yes there is, but I just found out it has been commented out. Not sure if
> the previous IT person who installed Bacula intentially commented this out
> or not. But if I leave it like that and disable the job BackupCatalog from
> bconsole, what woul
On Wed, Feb 8, 2012 at 8:19 AM, John Drescher wrote:
> On Wed, Feb 8, 2012 at 3:07 AM, Geert Stappers
> wrote:
>> Op 20120202 om 18:12 schreef John Drescher:
>>> Op 20120202 om 17:40 schreef Marty Frasier:
>>> > I GRANTed rights to user bacula for that table an
On Wed, Feb 8, 2012 at 12:43 PM, John Drescher wrote:
> On Wed, Feb 8, 2012 at 8:19 AM, John Drescher wrote:
>> On Wed, Feb 8, 2012 at 3:07 AM, Geert Stappers
>> wrote:
>>> Op 20120202 om 18:12 schreef John Drescher:
>>>> Op 20120202 om 17:40 schreef Marty
On Wed, Feb 8, 2012 at 2:55 PM, Honia A wrote:
> When I go to bconsole and type status, then no. 4, I get the *Backup OK*
> message at the end of all the jobs, so nothing fails. Is there any way I can
> check to see what's failing?
>
>From your output a few emails back it was the catalog job that
> Has anyone heard of getting more capacity out of an LTO-4 tape than it is
> rated for? Or are the byte amounts inflated, possibly, by artificially
> counting skipped-over file systems? I got several messages like "/boot is a
> different filesystem. Will not descend from / into /boot", but you wou
On Wed, Feb 8, 2012 at 6:32 PM, Honia wrote:
> Right, that was when I had the BackupCatalog as a part of my backup routine.
> But if I disable the BackupCatalog job, all other four jobs run smoothly
> without any errors. Now my question was if I keep the BackupCatalog disabled,
> does it have a
> Thanks John, what is the catalog good for? Does it have any impact on the
> four servers (mail server, file server, etc.) which have been backed up with
> Bacula?
>
The catalog is the database that bacula uses to keep a record of what
it has backed up, and what media it has used ... Without a c
> Thanks for your help. What I can't understand is why all four backup jobs
> running well without an error then? if I understand you correctly, you're
> saying if the BackupCatalog fails, the backup jobs should all fail?
No. I am saying if the catalog gets corrupted and you do not make
regular ba
2012/2/13 Joe Nyland :
> Hello everyone,
>
> I hope someone would be able to offer any suggestions of why I am seeing the
> following behaviour in my current Bacula setup:
>
> Since the tail end of last week, I have been having issues with my MySQL
> backups in Bacula, where they would randomly app
> I am new to the list. I am also a beginner with bacula.
>
> I already have my environment almost set, server already running and has
> clients storing files on my backup drive (IBM ULT3580-HH4).
>
> I am using original cartridges with a capacity of LTO4 800/1600GB. Use the
> latest version of Cen
> I always get a stange error message when i starting a job to my dell tl4000
> tape library.
>
> Tape
>
> Error:
>
> Volume "33L3" previously written, moving to end of data.
>
> Tape Ready to append to end of Volume "33L3" at file=65.
>
This is normal. Well except for the Error: part. I
> I've been running the SD using the following command (I know the combination
> of options I have used may be excessive, but I wanted as much chance of
> catching the error as I could!) since yesterday afternoon:
> sudo bacula-sd -c /etc/bacula/bacula-sd.conf -d 100 -dt -f -u bacula -g
> tape -
2012/2/14 Darci Dambrós Junior :
> Hello,
>
> I have 23 new cartridges and the problem occurs with all. The bacula holds
> about 20gb and begins to make mistakes.
>
> Look what dmesg showed after the last backup error:
>
> st0: Sense Key : Medium Error [current]
> Info fld=0xfc00
> st0: Add. Sense:
2012/2/16 Darci Dambrós Junior :
>
> 2012/2/16 Alan Brown
>>
>>
>> how about btape? have you followed the instructions for testing things
>> using that?
>>
>
> I used the command btape for testing. Everything is ok, there was no error:
>
> btape-c bacula-sd.conf / dev/nst0
> test
>
>
> In addi
On Thu, Feb 16, 2012 at 4:42 AM, Gary Stainburn wrote:
> Hi folks.
>
> I'm re-instating my bacula system after an althernative system failed.
> Unfortunately the config files I have are not the right version and I can't
> get concurrent backups working again.
>
> I have 30+ workstations and 10+ se
On Mon, Feb 20, 2012 at 4:40 AM, Uwe Schuerkamp
wrote:
> Hi folks,
>
> bacula seems to have forgotten the job details for a job I was going
> to test a restore on today. According to the bacula email, the backup
> finished ok:
>
> Build OS: x86_64-unknown-linux-gnu redhat
> JobId:
On Mon, Feb 20, 2012 at 9:40 AM, Uwe Schuerkamp
wrote:
> On Mon, Feb 20, 2012 at 09:36:47AM -0500, John Drescher wrote:
>>
>> Has you job retention period expired?
>>
>> Either way you can get this back using the bacula volume utilities.
>> http://www.bacula.org
2012/2/22 :
>
> Hi,
>
> I'm in the process of setting up MySQL backups in Bacula, using mysqldump
> for full backups and backing up my bin logs for incremental backups.
>
> What I would like to do is to perform a full backup to my full backup pool
> at 00:00 every night, then perform incremental b
On Wed, Feb 22, 2012 at 9:00 AM, Raymond Norton wrote:
> Bacula stopped creating new volumes. I can create them manually and jobs
> run after that, but trying to figure out why they are not auto created
> any longer.
>
> There were 7 volumes auto created before I had to manually create the
> last
-- Forwarded message --
From: Raymond Norton
Date: Wed, Feb 22, 2012 at 9:41 AM
Subject: Re: [Bacula-users] Volumes not auto created
To: John Drescher
Should have mentioned, the volume folder is an NFS mount.
drwxrwxrwx 3 root root 4096 2012-02-22 07:49 backups
On Wed, Feb 22, 2012 at 3:14 PM, Conrad Lawes wrote:
> Hello Bacula Users,
>
> I having a little problem. I have an Exabyte LTO3 Tape Library with
> AutoChanger attached. Whenever I create a restoration job the Director
> reports that it is waiting for the Storage device to become availabl
2012/2/24 Johannes Fabian Rußek :
> Hi everybody,
> I'm planning on how move off-site backups around from bacula.
> Originally I thought something like the copy or migration job from one
> SD on one site to another SD at a second site, but I realized that
> migration jobs only work within one SD.
>
> I'm sorry, maybe I did not write it clear enough into my mail:
>
> [...] and does not want to rely on NFS across datacenters
>
>> or rsyncing, for various reasons (throughput, security,
>> reliability...)
>
My fault for not paying attention.. Obviously you could rsync the
volume files to externa
> ToT* protocol does have an amazing throughput but has a very high latency
> and is very hard to monitor which is a dealbreaker for us unfortunately.
>
> Johannes
>
> *Tape over Truck
>
So are you using Tapes or disk volumes? I assumed you were using disk
volumes because of ease of carrying tapes
On Wed, Feb 29, 2012 at 3:41 PM, LasseKongo
wrote:
> Is there a way to update parameters on multiple volumes in a pool with one
> command?
>
> In my case I want to change the recycle flag from yes to no for all volumes
> in one
> of my pools, but I have so far only been able to change one volume
On Wed, Feb 29, 2012 at 4:00 PM, John Drescher wrote:
> On Wed, Feb 29, 2012 at 3:41 PM, LasseKongo
> wrote:
>> Is there a way to update parameters on multiple volumes in a pool with one
>> command?
>>
>> In my case I want to change the recycle flag from yes to
> I’d like to know if there is a way to allow the use of multi-cores during a
> backup and especially for the compression of the data?
>
I do not believe this is available in bacula at the moment. However
you may be able to turn compression off and use a filesystem that
supports compression like b
2012/3/5 Olivier L. :
> Hi all,
>
> I have two storage daemon with file device on each.
>
> I know that i can't use a copy job to transfer a Volume between my two
> storage daemon, but i need to transfert all my volumes on my second storage.
>
> Do you have any solution to my problem ?
>
rsync
Jo
On Mon, Mar 5, 2012 at 9:24 AM, Gael Guilmin wrote:
> To gain space on the LT0.
>
You mean tape. Do not use bacula compression with tape. The HW does
compression automatically and it is much faster.
John
--
Try before y
> Thanks for the answer.
> When you say "at the moment", you mean that in the future it'll?
>
Possibly. This is covered by a few planned projects.
http://bacula.org/en/?page=feature-request
http://www.bacula.org/git/cgit.cgi/bacula/plain/bacula/projects?h=Branch-5.2
John
---
On Mon, Mar 5, 2012 at 10:44 AM, Tilman Schmidt
wrote:
> Am 05.03.2012 15:43, schrieb Alan Brown:
>> On 05/03/12 14:17, Adrian Reyer wrote:
>
>>> Well, 'Media Type' is misleading. It is more a 'Media Group'. every
>>> medium in the same group can be requested on every SD that support that
>>> 'Med
> I thought about that, and so I'm wondering if it's really useful to use an
> MD5/SHA1 signature?
>
I think its very useful. I use that on all of my backups or ~40TB.
This allows verification that the tapes are consistent and you can
also compare that what is on the filesystem matches the hashes
> I’m wondering if there is a way to install a standalone (minimal) client of
> bacula on my systems instead of installing SQL and web based management on
> each of my machines?
>
That would depend on your distribution. On my distribution gentoo I
ask for client only and get only the client.
John
> Not sure I follow, I'm on CentOS but isn't there only one Linux client?
> I can't find any decent install procedures that don't come with other
> software on top of bacula.
>
You will have to ask Centos how they packaged bacula. Each
distribution has its own install procedure and packages its ow
> Once the client is installed, how do I control it from my server? Is
> that even passible?
>
All control is handled from the director always. So yes this is the only way.
John
--
John M. Drescher
--
Keep Your Develo
-- Forwarded message --
From: John Drescher
Date: Tue, Mar 13, 2012 at 1:49 PM
Subject: Re: [Bacula-users] Standalone client question
To: "Babadostov, Imanuel G [Contractor]"
> Ok, so best I can tell I need to install the bacula client and copy the
> content
2012/3/15 Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] :
> I compiled Bacula 5.2.6 with the following configure options:
>
>
>
> ./configure \
>
> --prefix=/usr/local/bacula-5.2.6 \
>
> --enable-smartalloc \
>
> --with-postgresql \
>
> --with-dump-email=uthra.r@nasa.gov \
>
> --with-job-email=
> Don't put the .bsr files in the working directory. Give them a full
> path. For example I put mine in /auto/backup/BootStrap
BTW, I do that in the jobs resource:
Write Bootstrap = "/auto/backups/BootStrap/%c_%n.bsr"
John
> Thanks for your reply. So what you are saying is I really don't have to
> recompile Bacula with "--with-bsrdir=PATH" instead I can change the path to
> the *.bsr files in the Bacula configuration directory. Instead of having:
>
> bacula-dir.conf: Write Bootstrap = "/var/bacula/working/%c.
On Fri, Mar 16, 2012 at 8:51 AM, Mingus Dew wrote:
> Dear All,
> I realize its kind of a strong subject line, but I seriously
> haven't gotten the windows FD to run on any platform in a very long
> time. It installs, the config looks good, but I ALWAYS on any platform
> (2k, 2k3, 2k8) get erro
>
> I am seeing the following error messages in my log file on my bacula server
> and not sure what to do?
>
>
>
> Mar 21 11:28:30 bacula-sd: bsock.c:335 Socket has errors=1 on call to
> client:***.***.***.***:36643
>
>
>
> I am on bacula 5.2.6.
>
I am sorry I can not help with this error. I
2012/3/23 Nicolas :
> Hi,
>
> When I refresh a Full Job (working with a base job), on BAT, the application
> doesn't respond. The CPU of DIR server is at 100% on mysql.
>
> While rebooting mysql service, problem disapears, and I've got the error on
> BAT :
>
> Select Distinct MediaType From MediaTy
> I'm using bacula with files backup. When I create a pool, and add a volume,
> the file is correctly created.
>
> Can I backup this volume's file, and remount it on pool later ??
>
>
>
> I don't find how..
>
You need to recycle it to reuse it.
John
> but, I dont want to loose datas in the volume. can we unmount the volume, to
> remount later and restore datas on lt ?
>
Sorry I did not understand what you were asking.
Yes you can do that. You probably want to do do this automatically
with directives like "Use volume once" or "maximum volume
> I just want to know, if the volume file created by bacula, is saved on
> another filler (manually), if I can reconnect it to bacula to restore datas
> on it.
>
Yes. You can copy bacula volume files to remote locations and even
restore them to independent bacula directors / databases provided you
> Is it normal that the request is very long or is it a bug ? Server is with
> Xeon 2Ghz CPU.
>
Neither. You need to tune your database server.
John
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days C
> What do you want to say by "tune my database server" ?
>
Look into mysql guides for improving database performance. By default
most distributions optimize their databases for machines with a
ridiculously low amount of ram like 32MB. Yes even in 2012 I see
my.cfg files that are optimized for 32 M
On Mon, Mar 26, 2012 at 12:09 PM, Nicolas wrote:
> good idea ! i'll try it asap and let you know.
>
Also its best if you can have the database on a different raid than
the storage or put the database on an SSD.
John M. Drescher
---
> On Mon, Mar 26, 2012 at 12:09 PM, Nicolas wrote:
>> good idea ! i'll try it asap and let you know.
>>
BTW, Please excuse me for being very short on the replies today. I am
not feeling at all well today. The pollen / changing whether has made
it very difficult to breathe.
John
> If it's pollen, a good dustmask/halfmask works far better than any drug
> available - and the only side effect is looking a little odd. You'll usually
> notice the change within 15 minutes.
>
I may try this at home. At work I will have to tough this one out..
John
-
> don't worry for your responses :)
>
> where are you ? I'm in france
>
Pittsburgh, PA, USA.
John
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
__
> What is process for removing tapes that are not yet full from that tape
> library?
> When I remove a not-yet-full tape from tape library and neglect to change
> its status to "Full", Bacula does not alert me that it's waiting for that
> tape to be mounted. Furthermore, it does not attempt
> What I'm after is a more hands-off approach. A simple set-it and forget-it
> feature. I need Bacula to "make these decisions" without any human
> intervention.
>
> If the last tape with Append status is not available bacula should do the
> following:
>
> 1. Notify the backup admin
> 2. Th
On Thu, Mar 29, 2012 at 1:49 PM, John Drescher wrote:
>> What I'm after is a more hands-off approach. A simple set-it and forget-it
>> feature. I need Bacula to "make these decisions" without any human
>> intervention.
>>
>> If the last tape with
> Could you elaborate more on "you can use Admin job which will change volume
> status when it is not available in tape library"
> What is an admin job?
A backup job you schedule at the admin level. Primarily it will run a
server side script for you.
> How does one create a job to change volume s
On Tue, Apr 3, 2012 at 9:01 AM, Ward Poelmans wrote:
> Hi,
>
> I'm rather new to bacula: i've worked with it for 6 months now. But
> now, there is happening something which I do not understand: Automatic
> Volume Recycling. I've got a client with a job retention of 6 months
> with autoprune on. It
> Well, from the docs: "The Volume Retention record defines the length
> of time that Bacula will guarantee that the Volume is not reused
> counting from the time the last job stored on the Volume terminated."
That is correct.
> It also doesn't make sense to recycle as soon as the job no longer
>
2012/4/3 Juan Pablo Botero :
> Hi all.
>
> I have configured bacula Server in CentOS and a client in windows, so the
> Server can see the client, testing the FileSet i can see the files of the
> client, the job run but it doesn't transfer any byte to the disk.
>
> The Storage Section in bacula-dir.
> Get rid of 127.0.0.1 and localhost from all bacula files.
Using this (127.0.0.1 or localhost) prevents bacula from being a
network backup program since the external client can not access the
server via 127.0.0.1..
John M. Drescher
---
> I edit the Address with the name of the host and with the ip addres and
> still the same.
>
>
Did you restart the bacula server? If so print the error message you
get when you run your backup.
John
--
Better than sec? N
On Thu, Apr 5, 2012 at 8:18 AM, Wolfgang Denk wrote:
>
> Hi,
>
> I wonder why I see situations that a client is waiting for another job
> to complete, that is only despooling, i. e. that does not block any
> resources on the client:
>
> 53100 Increme SD despooling Data
> 53101 Increme is wai
On Thu, Apr 5, 2012 at 2:19 PM, Wolfgang Denk wrote:
> Dear John Drescher,
>
> In message
> you
> wrote:
>>
>> Do you have any restrictions on how many jobs go per volume?
>
> No.
Is the same volume used by both clients? I mean you are not using a
different
On Thu, Apr 5, 2012 at 6:24 PM, Wolfgang Denk wrote:
> Dear John Drescher,
>
> In message
> you
> wrote:
>>
>> >> Do you have any restrictions on how many jobs go per volume?
>> >
>> > No.
>>
>> Is the same volume used by both clie
> I have a bacual-dir with ~250 clients. And each client has its own catalog.
>
> When bacula-dir start, bacula-dir checks each database (~10s per client =
> ~45 minutes !!!)
> Meanwhile, the director is not accessible...
>
> How can I bypass that or reduce that ?
>
I would try speeding up your da
On Mon, Apr 9, 2012 at 4:39 PM, Julien S wrote:
> Do you think if I tuning databases with :
> http://www.newitperson.com/2011/01/reduce-bacula-dbcheck-time/
> CREATE INDEX File_JobId_idx ON File(JobId);
> CREATE INDEX File_PathId_idx ON File(PathId);
> CREATE INDEX File_FilenameId_idx ON File(File
> Bacula isn't really about bare-metal recovery, especially when it comes
> to Windows. Using just Bacula, the answer for Windows is to install the
> system from scratch on the new hardware, install the Bacula client, then
> do a restore. I'm not even sure how simple restore will work with
> lock
> I reported this back in July of 2010
> http://sourceforge.net/mailarchive/message.php?msg_id=25685277
> This has happened to me several times since then but I haven't been able to
> figure out why. It is strange that for some unknown reason bacula will grab
> all available volumes from the scr
> I was looking in Internet without any luck (maybe because I'm not an
> english native, and my text search strings wasn't enough good).
>
> Please, I need information about the possibility of use one LTO device
> attached to one bacula server machine, by another bacula server
> machine. Maybe I co
2012/4/12 Carlo Filippetto :
> Hi,
> I have bacula-server installed on a CentOS 5.2, version 5.2.3, kernel i686
>
> Today I installed fot the first time a client with CentOS 6.2 x86_64
> (installation made with yum with bacula 5.0.0.9)
>
> I can't understand why I have this error:
>
> 12-apr 16:44
> Yes,
> but I can't fine the answer
>
Did you verify the passwords match? If so make sure that no bacula
config file uses 127.0.0.1 or localhost as its IP address.
--
John M. Drescher
--
For Developers, A Lot Can Happe
On Thu, Apr 12, 2012 at 11:46 AM, Manuel Trujillo
wrote:
> 2012/4/12 John Drescher :
>> You can share a SD between directors. However do you really need 2
>> directors, independent databases ... ?
>
> The problem is that I need to make copy jobs to LTO from the 2nd
> bacu
> There's any problem with client 64 bit and server 32 bit?
No. At least I have not seen that in the 7 to 8 years I have had 64
bit bacula servers and 32 bit clients.
> This is the firts client I install with yum, usually I compile it with
> --enable-client-only, may be this the problem?
I can n
> I am using Bacula 5.0.1 running on an Ubuntu 10.04 64-bit server with a Dell
> PowerVault TL2000 tape library attached via a SAS controller. In the
> library are two LTO4 drives and I am using LTO4 media. From a backup over
> the weekend I found the following message in the bacula log:
>
>
>
>
> Thanks for the quick reply. No errors that I can find in dmesg. However,
> there are a lot of jpeg files on this server...that does make sense that
> compressed files cannot be compressed a second time.
>
Also if you are using encryption in bacula. I am not sure if that
bacula uses compressibl
On Wed, Apr 18, 2012 at 12:42 PM, Andre Rossouw wrote:
> Hello.
>
> I have a system running Ubuntu 10.04 with Bacula 5.0.1. and a SCSI
> Tandberg LTO-3 HH drive. It has been running without problems since
> 2010. Last week it started writing ~200GB data to the media, and
> reporting that the media
> Could there be any other reason you may think of (possibly outside of
> bacula) that would cause a drive to think it's written more than it has,
> or for the job to start at the wrong point on the tape?
>
LTO media does not work that way. To write from beginning to end it
does multiple passes of
> Thanks for the info. Another question: the text on wikipedia states
> "LTO-3 and LTO-4 use a similar format with 1,616,940-byte blocks" - is
> this something I would need to add as a directive (in trying to resolve
> my current issue), or would Bacula set this appropriately when I set
> media typ
On Thu, Apr 19, 2012 at 3:47 AM, alexturner
wrote:
> Hey all,
>
> I'm trying to set up a bacula sever to backup all machines on the network to
> LTO tape. I'm having a hard time getting my config to work. For starters
> bacula-dir wont start from the /etc/init.d/bacula-director script but it wil
> If you want bacula to function as a network backup program you need to
> remove 127.0.0.1 and localhost from all bacula config files and
> replace these with the eternal ipaddress otherwise bacula can not
> communicate on the network..
I meant external ipaddress. The gmail new look has made it v
> Your director's name is not the same in your files. Passwords are not
> the same neither.
> In bacula-sd.conf, your director's password has to match the Storage's
> one in bacula-dir.conf.
>
I agree. On top of the 127.0.0.1 problem these other problems also
need to be corrected.
John
-
-- Forwarded message --
From: John Drescher
Date: Thu, Apr 19, 2012 at 5:14 PM
Subject: Re: [Bacula-users] How to get free hard disk space back ?
To: Jerome Alet
On Thu, Apr 19, 2012 at 5:04 PM, Jerome Alet wrote:
> On Thu, Apr 19, 2012 at 10:11:20AM -0400, Josh Fisher wr
>> Bacula defaults to fixed blocks of ~ 64K. This will work with all LTO
>> drives but can be suboptimal in performance. You can change the block
>> settings in bacula-sd.conf however I believe that will make all tapes
>> that were written with the 64K blocks unusable without you manually
>> erasin
> When you recycle tapes they get relabelled. At that point the larger block
> size will be used automatically.
>
> It works for me.
Thanks. I will try to test this soon provided I get some time.
John
--
For Developers,
-- Forwarded message --
From: Jesper Krogh
Date: Wed, Apr 25, 2012 at 2:29 PM
Subject: Re: [Bacula-users] mtx and Overland Neo8000e
To: John Drescher
On 25/04/12 20:26, John Drescher wrote:
>>
>> But the time it takes for status/load/unload is about 2 minute
> The go to different storage devices which are of the same media type (File) &
> use the same Archive Device (/data1). Is the problem that they are writing to
> the same archive device? Thanks! - Steve
>
That should be fine. Some users make the mistake of trying to use a
single storage device a
> Any comment is very welcome.
>
I have used this several times in the past at work. I would like to
see full sheet label paper better supported. I am talking about avery
5165.
By the way thanks for making this free,
John
--
On Wed, Apr 25, 2012 at 4:23 PM, Boutin, Stephen
wrote:
> Ok, thanks. They do write to different files within that archive device, as
> well. Any other thoughts/ideas as to what might be causing my issue?
>
You do have the Maximum Concurrent Jobs like I discussed in my first reply?
--
John M.
> Correct. That is set at 22 in every place possible (6 different areas, I
> believe).
>
I am out of ideas at the moment. Hopefully others will chime in..
John
--
Live Security Virtual Conference
Exclusive live event wi
2012/4/26 Marchon . :
> Hi,
>
> Really really need help
>
> When running bconsole to mount or label the following error occurs.
> --
> # bconsole
> Connecting to Director abnspsrv05:9101
> 1000 OK: abnspsrv05.cnh-boavista.abnot Version: 5.2.6 (21 February 2012)
> Enter a period to cancel a comm
2012/4/27 Jack Cobb :
> Hello everyone,
>
>
>
> We are using Bacula 5.0.1 running on an Ubuntu 10.04 server attached to a
> Dell PowerVault TL2000 tape library. I run differential daily backups
> Monday thru Thursday and a full weekly backup on Friday. I have pools setup
> for both the daily and
On Mon, Apr 30, 2012 at 11:11 AM, Jack Cobb wrote:
> Hello everyone,
>
> I am wanting to copy data from one tape to a second tape so I have one
> offsite and the other onsite. I am using the bcopy utility but when I enter
> the following command I receive an error message:
>
> bcopy -c /etc/bacul
On Fri, May 4, 2012 at 2:35 PM, Luis H. Forchesatto
wrote:
> Hi
>
> I'm receiving the following messages from bacula after changed the
> destination of the backups. The destination had to be changed after an disk
> failure, now an usb drive are beign used.
>
> The job status:
>
> JobId Level Na
-- Forwarded message --
From: Luis H. Forchesatto
Date: Fri, May 4, 2012 at 2:55 PM
Subject: Re: [Bacula-users] backup
To: John Drescher
Yes.
2012/5/4 John Drescher
>
> On Fri, May 4, 2012 at 2:35 PM, Luis H. Forchesatto
> wrote:
> > Hi
> >
> >
On Mon, May 7, 2012 at 8:13 AM, Martin Reissner wrote:
> Hello,
>
> I had to remove several clients (fds) from my bacula setup and I found
> no intructions on how to do this properly. Can someone please help me out?
> What I want to achieve is that all database entries related to those
> clients (
> No help about this?
> No one is using this library?
>
I do not use that library however you problem does not appear to have
anything at all to do with your choice of hardware.
I never ever use Copy jobs so I can not help with that either however
I do have a 2 drive autochanger and I do use that
On Mon, May 7, 2012 at 10:01 AM, Bertrand, Guy wrote:
> Hi all,
>
>
>
> I have a 2 server setup:
>
>
>
> Server 1: runs bacula-dir and has a lot of disk space, so I do nightly
> backups to disk
>
>
>
> Server 2: has no disk space, but has a tape drive
>
>
>
> (and no, I cannot put the tape drive o
-- Forwarded message --
From: Gandalf Corvotempesta
Date: Mon, May 7, 2012 at 11:01 AM
Subject: Re: [Bacula-users] DELL TL2000
To: John Drescher
Il giorno lun, 07/05/2012 alle 10.01 -0400, John Drescher ha scritto:
> I never ever use Copy jobs so I can not help with that eit
On Mon, May 7, 2012 at 4:01 PM, Guido Falsi wrote:
> On 05/07/12 21:09, Denny Schierz wrote:
>> hi,
>>
>> Am 07.05.2012 um 19:50 schrieb Guido Falsi:
>>
>>> I'm doing something like this, but I'm using a pass-through iscsi target.
>>
>> why don't use NFS? I use in my case a second bacula-sd which
> Very stupid question, is the first time that I use
> a tape library: should I put a physical label with
> a barcode on the tape?
>
Yes. Your tape functionality will be greatly increased if you have a
barcode reader on your archive and use barcode labels.
After you do that. use the bacula update
701 - 800 of 1190 matches
Mail list logo
