The SAS controller was working with an IBM library with LTO-4 with
another computer running bacula 5.xxx. When the IBM died we decided that
it was time to upgrade rather than repair as the LTO-4 was no longer
large enough to backup everything. We never really looked into whether
it was the HBA
> I found another person with the very same symptoms and they resolved the
> problem by changing out the SAS host adapter
Wow that's weird that a SAS controller would be to blame! My library
and drive are HP and they supply "HP Tape Tools" which you can use to
run tests on the library (and d
I found another person with the very same symptoms and they resolved the
problem by changing out the SAS host adapter
I Note that both my bacula-dir and my bacula-sd conf files have a
Storage section, with a Device section only in bacula-sd.
Is this correct or should the Storage and Devic
> As mentioned earlier, the command
>
> ./mtx-changer /dev/sg3 load 1 /dev/st0 0
>
> actually put the desired tape into the drive, however
>
> ./mtx-changer /dev/sg3 unload 1 /dev/st0 0
>
> returns the following error message
This to me looks like the mtx-changer script is not able to talk to
I have made changes as suggested and things seem MUCH better, but not
functional
I no longer get error messages when typing label from bconsole
As mentioned earlier, the command
./mtx-changer /dev/sg3 load 1 /dev/st0 0
actually put the desired tape into the drive, however
./mtx-changer /dev/
> Automatically selected Storage: LTO-6
This seems to suggest that the Director is configured to use a device
called "LTO-6". Care to post the bacula-dir.conf? I know you said
there's no mention of "LTO-6" here, but perhaps you need to mention the
storage device specifically? With your config n
On 10/01/2019 14:04, Richard Couture wrote:
Greetings
I am upgrading from Bacula 5 to Bacula 7.4.3, since that is what Mageia
6.1 provides,
Just build the latest version from source, after applying the patch,
search the archives for details, it was found on Solaris.
Relying on non-mainstream
Greetings
I am upgrading from Bacula 5 to Bacula 7.4.3, since that is what Mageia
6.1 provides, and from an IBM autoloader with LTO-4 to a Quantum scalar
I3 with LTO-8 tape drive using BRAND NEW LTO-7 tapes, and after all is
said and done, bacula tells me, when going to label a tape from bcons
