Thanks kern , let me read
On Wed, Nov 14, 2018 at 1:21 PM Kern Sibbald wrote:
> Hello,
>
> I believe the manual talks about this. However, if you read the
> whitepaper at:
>
> www.bacula.org -> Documentation -> White Papers -> Disk Backup Design
> (especially chapter 3)
>
> or
>
> www.bacula.or
Hello,
I believe the manual talks about this. However, if you read the
whitepaper at:
www.bacula.org -> Documentation -> White Papers -> Disk
Backup Design (especially chapter 3)
or
www.bacula.org -> Documentation -> White Papers -> Best
Dear All,
I have ML6000 with 10 Tape Drives .
We configure the above 10 drives as devices and added tapes in one pool
with individual volumes . each vol is one tape.. uisng label
barecode commnad
now when we run backup . we see that autochanger only use Single Drive .
is it possible
1) for singl
On 2/4/2013 7:56 PM, Jonathan Horne wrote:
> My boss needs me to take the 2 tape drives inside the PV4000 and form
> them into 1 logical drive and stripe the backups across them
> simultaneously. Please help me figure this out, is this possible?
Bacula expects to read/write a volume from a sin
Zitat von Jonathan Horne :
> My boss needs me to take the 2 tape drives inside the PV4000 and
> form them into 1 logical drive and stripe the backups across them
> simultaneously. Please help me figure this out, is this possible?
Hello
while it is possible to use more the one drive concurr
On Mon, Feb 4, 2013 at 7:56 PM, Jonathan Horne wrote:
> My boss needs me to take the 2 tape drives inside the PV4000 and form them
> into 1 logical drive and stripe the backups across them simultaneously.
> Please help me figure this out, is this possible?
>
Not directly with bacula.
John
-
On 5/02/2013 11:56 AM, Jonathan Horne wrote:
> My boss needs me to take the 2 tape drives inside the PV4000 and form
> them into 1 logical drive and stripe the backups across them
> simultaneously. Please help me figure this out, is this possible?
>
Update your resume, and leave, ASAP.
This will
My boss needs me to take the 2 tape drives inside the PV4000 and form them into
1 logical drive and stripe the backups across them simultaneously. Please help
me figure this out, is this possible?
Thanks,
Jonathan
This is a PRIVATE message. If you are not the i
essage-----
> > From: [EMAIL PROTECTED] [mailto:bacula-users-
> > [EMAIL PROTECTED] On Behalf Of Chris Wilson
> > Sent: Friday, February 17, 2006 4:25 PM
> > To: bacula-users@lists.sourceforge.net
> > Subject: [Bacula-users] multiple tape drives at once not working
ets.
Thanks,
Ray
-Original Message-
From: [EMAIL PROTECTED] [mailto:bacula-users-
[EMAIL PROTECTED] On Behalf Of Chris Wilson
Sent: Friday, February 17, 2006 4:25 PM
To: bacula-users@lists.sourceforge.net
Subject: [Bacula-users] multiple tape drives at once not working
properly
Hi,
I ha
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris
WilsonSent: Friday, February 17, 2006 4:25 PMTo:
bacula-users@lists.sourceforge.netSubject: [Bacula-users] multiple
tape drives at once not working properly
Hi,
I have a tape library w
Hi,
I have a tape library with four drives in it, and would like
to use all four drives at once, rather than just one of the drives. I’ve
read through archives on this email list, as well as the bacula documentation,
and followed the recommendations on how to do this, but it doesn’t se
I have an interesting problem, which I am sure is due to ignorance. Here is a
crash course on my scenario:
I have serveral jobs that backup to disk. I have 6 Tape drives (5 Sony DDS-4's
and 1 Onstream ADR-50) which have passed the btape tests. They are
setup /dev/nst0-/dev/nst5 both in the s
13 matches
Mail list logo