Hello,
My name is Javier Arroyo Cabello and I'm interested in applying to develop
one of your ideas in the Google Summer of Code ideas page.
How could I contact with the mentor for further information before sending
my application?
I found in the page that the mentors for the idea I'm
Hello sir
Using hp printer in linux pc it is asked automatic install to driver
package.
But in beaglebone no GUI so how I do ..! Not unable to print..(
Cups and hplip is already on bbb
Any other packages is required..?
On Mar 6, 2014 12:14 AM, Yves Grignon grignon.y...@gmail.com wrote:
I
Sorry, I should have said that I'd tried cpuinfo. I can change the
governor (with -g), but not the frequency:
tuppence ~ # cpufreq-set -f 1000MHz
tuppence ~ # cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpuf...@vger.kernel.org, please.
I have a WT32 bluetooth module (two of them in fact) that I want to connect
to the BBB to record audio coming from them.
I have two choices, how I see it - add USB audio to the BBB, and connect
the analog outputs of the WT32 devices to the USB soundcards... simple, but
expensive.
The WT32
I haven't been able to ever connect through USB, but I've always had the SD
card in.
On Friday, March 7, 2014 7:33:50 AM UTC-8, mingzh...@gmail.com wrote:
After update Angstrong in eMMC by SD card, I restart BBB with and without
SD card. Everything is fine without SD card and I can access to
Hi there!
Any progress on how to read from MLX90620 RAM?
I read from the datasheet, sensor address is 0x60 but it is not there from
my i2cdetect. Instead, I got 0x50 - 0x57 address.
Any suggestion on how to access the measurement data?
This is my i2cdetect result:
pi@raspberrypi ~ $ i2cdetect
Hi,
I have a Beaglebone with installed the TI Sitara Linux OS.
Im have configure the lighttpd.conf file for to test a cgi program written
in C.
I have made a file index.html that call the cgi.
The index.html file is:
form action=/test.cgi method=POST
First Name: input type=text
This works wonderfully! Thanks. Do you, or anyone else, have tips on
getting wifi going with this image?
On Friday, February 28, 2014 5:00:43 AM UTC-5, Christian Ruocco wrote:
Hi,
My image is configured to give the ethernet device the static IP address
192.168.0.21 and default gateway
Utilizing spider, is there a simple way to control SPI timing parameters to
match specifications of slave devices?
I'm interested in controlling various parameters such as setup/hold times,
data valid times, etc.
Thanks,
David
On Wednesday, May 22, 2013 6:21:54 PM UTC-4, Azure Wang wrote:
I am having basically the same issue, but wired connection with
debian... http://beagleboard.org/project/debian
I will have a connection just fine then after several hours it will stop
responding to all network traffic as if it were not there. The LEDs
continue to flash as normal with cpu,
Is there an image for the capacitive 7 version with Debian Wheezy?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send
Has anyone an image for the capacitive 7 LCD version with debian wheezy?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it,
Dear Mr Sai
Am looking to get in touch with you regarding your good work.
Please do connect
Thanks and regards
Aditya
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe
as the README file in dropbear-201463, I found that Dropbear does not
support encrypted hostkeys though can connect to ssh-agent. which i guess
means that it cannot be log in with a public key.
在 2012年1月11日星期三UTC+8上午7时48分57秒，CC Ma写道：
So I generated a public key and private key pair on my
Hi,
perhaps you could try to use p910nd. It not need to install any additional
printer drives on BBB but it only spoils the connection between printer
connected to USB on eg. BBB and the host system from where you want print
from.
Regards,
Marcin
2014-03-16 13:45 GMT+01:00 Chintan Kapadia
Compile the code with 'gcc -g -o readButton readButton.c' , and run it
with 'gdb readButton'. You will get a gdb prompt, so just give it the
'r' command. When you get the SEGV, gdb will stop and show you the
line it happened in, whereas you will be able to examine variables in
the program, etc.
Hi,
On Sun, Mar 16, 2014 at 8:52 AM, milkyway muhammednouf...@gmail.com wrote:
Hi, I am new to this group. Following is a code I tried from Derek
Malloy's videos, to read the gpio pin values. When I run this program I get
Segmentation fault. I can't make out how it happens. Can anybody help
I'm a little confused...
FYI I'm running ArchLinux on BBB, but I get this error:
cat $SLOTS
0: 54:PF---
1: 55:PF---
2: 56:PF---
3: 57:PF---
4: ff:P-O-L Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G
5: ff:P-O-L Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI
echo
Am 16.03.2014 16:52, schrieb milkyway:
Hi, I am new to this group. Following is a code I tried from Derek Malloy's
videos, to read the gpio pin values. When I run this program I get
Segmentation fault. I can't make out how it happens. Can anybody help me
out?
#include stdio.h
#include
Hello all,
I am new in this group and i have the problem to run the simple hello
world program
written in gtk on the Beaglebone black via HDMI and cape.
The borders of the terminal from where i start the program are gone.
The terminals are dead.
The window is fixed on top left of the screen,
Hi walter,
On Sun, Mar 16, 2014 at 9:54 AM, walter harms wha...@bfs.de wrote:
Am 16.03.2014 16:52, schrieb milkyway:
Hi, I am new to this group. Following is a code I tried from Derek
Malloy's
videos, to read the gpio pin values. When I run this program I get
Segmentation fault. I can't
Yes %s was the culprit. Changed to %c.
Thank you all, I didn't expect this huge participation in this forum.
On Sunday, 16 March 2014 22:16:17 UTC+5:30, Dave Hylands wrote:
Hi,
On Sun, Mar 16, 2014 at 8:52 AM, milkyway muhamme...@gmail.comjavascript:
wrote:
Hi, I am new to this group.
The proble was %s, %c works perfect.
Thank you all
On Sunday, 16 March 2014 21:22:13 UTC+5:30, milkyway wrote:
Hi, I am new to this group. Following is a code I tried from Derek
Malloy's videos, to read the gpio pin values. When I run this program I get
Segmentation fault. I can't make out
fwiw, I'm seeing what *appears* to be this same issue on the latest board
I've bought - occasionally there is no Ethernet connectivity on power-up, a
physical power off/on always resolves it...
This is a rev B board, running the latest Debian test image with beta 3.13
kernel, and has happened
On 03/16/2014 12:51 PM, Louis Thiery wrote:
echo BB-uART4-00A0 $SLOTS
-bash: echo: write error: No such file or directory
$SLOTS is an environmental variable pointing to
/sys/devices/bone_capemgr.9/slots
I'm not sure how I can cat $SLOTS, see what I expect, but then not be
able to
I have an unresponsive BBB as well, I submitted an RMA and am waiting for a
response. But is there a way to recover the contents of the eMMC after the
board goes dead?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the
You have a response form the RMA team.
Gerald
On Sun, Mar 16, 2014 at 2:37 PM, danie...@umbc.edu wrote:
I have an unresponsive BBB as well, I submitted an RMA and am waiting for
a response. But is there a way to recover the contents of the eMMC after
the board goes dead?
--
For more
Unfortunately I was never able to resolve this, although I didn't try
rebuilding the kernel or anything. I ended up switching to the Raspberry
Pi, because while it's a bit slower it seems to be much more stable for
longer than a few hours.
On Sat, Mar 15, 2014 at 8:11 PM, ahar...@gmail.com
I've been looking into the issue some more (sorry for the delay), and I've
still not been successful on getting the touch screen to work with 3.8.
I am getting touch interrupts, but i don't appear to be able to calibrate
myself out of the problem.. (?)
After touching the screen the first time,
Hi,
Check out this thread:
http://beagleboard.org/Community/Forums/?place=msg%2Fbeagleboard%2FnwS91gX6dtk%2FKzn5LeytsCUJ
I had the same issue with the 4DCAPE-70T.
I replaced the delay to 15 ms and the issue went away but it still
feels like a hack.
On Sun, Mar 16, 2014 at 4:11 PM, paccer
Hi, I'm trying to get the LCD7 touchscreen to work with my xm, and am
having issues with getting the touch to work. The demo image given here (
http://elinux.org/Beagleboardtoys:BeagleBone_xM_LCD7#Software_Support)
works but doesn't really suit my needs, as it doesn't appear to have SPI
Received my BBB 2 days ago and haven't been able to boot it off the PC.
Message while trying to boot says This is not a bootable disk. Insert
bootable floppy and press any key...
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed
It is not a bootable device that a PC boots from. It does not need a PC to
boot. It is a stand alone board intended to be a Linux PC, with a monitor,
keyboard, and mouse. It can look like a USB drive on a PC, but that is
about it.
Gerald
On Sun, Mar 16, 2014 at 4:37 PM,
Has anyone generated a uSD flashable image for CentOS? With or without
video.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails
Hi,
I am using BeagleBoard Rev C3, running ubuntu 11.10.
# uname -a
Linux localhost.localdomain 3.0.0-12-omap #20-Ubuntu Fri Oct 7 14:58:13 UTC
2011 armv7l armv7l armv7l GNU/Linux
My serial connection is me giving junk characters, so I set up the ssh
through usb0. But the problem is, in order
35 matches
Mail list logo
