Re: [beagleboard] Re: ds18b20 with BBGW

@ Sebastian Ah I forgot to mention loading capes from /boot/uEnv.txt. So . . . *william@beaglebone:~$* cat /boot/uEnv.txt |grep cape #cmdline=coherent_pool=1M quiet cape_universal=enable video=HDMI-A-1:1024x768@60e #cape_disable=capemgr.disable_partno= #cape_enable=capemgr.enable_partno=

Re: [beagleboard] clone image

Also, knowing whether you want an system that boots from the emmc, or sdcard is required in order to moreproperly answer your question, Additionally, what I mentioned above in every case is a one off only copy. Meaning you'd have to re-image each board one at a time. In order to do multiple

Re: [beagleboard] clone image

Robert uses rsync I think for his cloning image( emmc flasher images ). But I think the best, easiest, and most consistent way to clone an image would be to use dd. This has the benefit of creating a bit for bit exact copy of the image in question. However, one downside to using dd is that if

Re: [beagleboard] Re: ds18b20 with BBGW

On Sat, Dec 3, 2016 at 10:52 AM, Sebastián Sáez wrote: > Again, thanks Williams... that was it. > > I commented everything about P9.22 in ./bb.org-overlays/src/arm/ > univ-bbgw-00A0.dts > Then build and install with your instruccions :) > > Which is an elegant way to mount the

[beagleboard] clone image

Hi Guys, I'm working in a machine that in his heart has beaglebone. Now I have my python script for GPIO and mi linux up to date with some tweaks. What it's the clever-fast way to cloning this for other machines?? (maybe 40 machine..maybe more in future). regards, Sebastián -- For more

Re: [beagleboard] wifi intermittent

Good point Graham. Now I'm in a warehouse with one router, many startups, many power machine working and Sonos speaker with audio streaming. Mark, I try and it seems to work..how to do for run this command on every boot? regards, Sebastián On Friday, December 2, 2016 at 3:51:53 PM UTC-8,

Re: [beagleboard] wifi intermittent

Good point Graham. Now I'm in a warehouse with one router, many startups, many power machine working and Sonos speaker with audio streaming. Mark, I try and it seems to work..how to do for run this command on every boot? regards, Sebastián On Fri, Dec 2, 2016 at 3:51 PM, Graham

Re: [beagleboard] Re: ds18b20 with BBGW

Again, thanks Williams... that was it. I commented everything about P9.22 in ./bb.org-overlays/src/arm/univ-bbgw-00A0.dts Then build and install with your instruccions :) Which is an elegant way to mount the w1 overlay automatically after reboot? By the way, I switched my VCC to 3.3V

Re: [beagleboard] Re: BBGW SPI0 data corrupt

Thank you very much! I will try to remove it and see if any luck with the spi0 On Sat, Dec 3, 2016 at 1:09 AM, Joe Phaneuf wrote: > Pretty confident it's not kernel version. Actually explored that line of > thinking a little, but there's a u-boot spi tool you can use to