Re: [beagleboard] xrandr Can't open display

*Hi Przemek,* *Thank You for the reply.I stated the X server with startx command.I am getting the following messages in the terminal. root@localhost:~# startx* X.Org X Server 1.16.4 Release Date: 2014-12-20 X Protocol Version 11, Revision 0 Build Operating System: Linux

Re: [beagleboard] Re: PHP version not correctly recognized.

That would be exactly what I need, and that's exactly the point where I'm still a noob regarding linux and web-management issues. What I understand from what you say RobertCNelson, I just have to open the file */etc/php5/apache/php.ini *using any editor and change some lines in it, but, the

Re: [beagleboard] Re: how to unfreeze my BBB?

Additional information I unintentionally left out, and be VERY CAREFUL with using he -rf flags with rm. Make sure you're removing the correct directory. This can completely hose your Linux rootfs if you're not absolutely sure what you're doing. This is also partly why I traverse into a new mount

Re: [beagleboard] Re: how to unfreeze my BBB?

By the way, DR. Molloy seems to be a good guy, and has a lot of useful information. But much of that information is dated, and wont work with current images. What this boils down to is that if you're not an expert, or at least proficient with Linux. You're very likely to run into many problems.

Re: [beagleboard] Re: how to unfreeze my BBB?

On Tue, Feb 14, 2017 at 7:02 PM, mzimmers wrote: > > William: I do in fact own a debug cable. I'll try plugging it in and see > if I can see anything. I've never worked with boot arguments; can you tell > me where they're kept? > > mz > root@beaglebone:~# lsblk NAME

Re: [beagleboard] Re: how to unfreeze my BBB?

On Tue, Feb 14, 2017 at 8:23 PM, mzimmers wrote: > Here's a snippet of terminal output. > > >> copying: [/dev/mmcblk0] -> [/dev/mmcblk1] >> lsblk: >> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT >> mmcblk0boot0 179:80 4M 1 disk >> mmcblk0boot1 179:16 0 4M

[beagleboard] Re: how to unfreeze my BBB?

Here's a snippet of terminal output. copying: [/dev/mmcblk0] -> [/dev/mmcblk1] > lsblk: > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > mmcblk0boot0 179:80 4M 1 disk > mmcblk0boot1 179:16 0 4M 1 disk > mmcblk0 179:00 3.6G 0 disk > |-mmcblk0p1 179:1096M

[beagleboard] punyforth on BeagleBone Black native

native punyforth code, binary, sd image, led example https://drive.google.com/file/d/0B_qSaU5Z0YH2OW9ON3lEa0NEcFk/view?usp=sharing -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To

[beagleboard] Re: how to unfreeze my BBB?

Hi, Dennis - thanks for the reply. The image is on a microSD card. I followed the directions here . I got the image from here . It

Re: [beagleboard] how to unfreeze my BBB?

On Tue, Feb 14, 2017 at 4:34 PM, mzimmers wrote: > So, in an attempt to upgrade the OS on my BBB, I managed to get it to lock > up. > > When I try to boot, the LEDs look like normal for a few seconds, but then > LED2 comes on solid, and the others are off. > > This occurs

Re: [beagleboard] how to unfreeze my BBB?

reflash with a current image or an image of your choice On 2/14/2017 4:34 PM, mzimmers wrote: > So, in an attempt to upgrade the OS on my BBB, I managed to get it to > lock up. > > When I try to boot, the LEDs look like normal for a few seconds, but > then LED2 comes on solid, and the others are

[beagleboard] how to unfreeze my BBB?

So, in an attempt to upgrade the OS on my BBB, I managed to get it to lock up. When I try to boot, the LEDs look like normal for a few seconds, but then LED2 comes on solid, and the others are off. This occurs whether or not I plug in my flash drive. When I hold down the boot button, I get

Re: [beagleboard] Re: PHP version not correctly recognized.

On Tue, Feb 14, 2017 at 5:11 PM, Guren_Wolf wrote: > These is the data displayed both in the terminal and the info.php file. Have you updated /etc/php5/apache/php.ini to point it to your new php location? Regards, -- Robert Nelson https://rcn-ee.com/ -- For more

[beagleboard] Re: PHP version not correctly recognized.

*These is the data displayed both in the terminal and the info.php file.* -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from

Re: [beagleboard] How to prevent flashing SD card image to eMMC?

> Does that mean that it's not possible to boot a bone from SD card if there > is no uboot in eMMC? Or is eMMC uboot needed to provide logic that overrides > the bootrom search order, bypassing valid boot code that is found before > reaching the SD card? microSD is after eMMC. The bootrom is

[beagleboard] Re: PHP version not correctly recognized.

The path where I *untared* it, *unziped* it, used the command *./config *, *make* and *make install* is */usr/local/src/php5.6.30.* Is this path wrong to do all of this? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the

Re: [beagleboard] How to prevent flashing SD card image to eMMC?

On Tuesday, February 14, 2017 at 1:55:16 PM UTC-8, RobertCNelson wrote: > > > I was able to mount the card without knowing the type, apparently mount > is > > smart enough to determine on its own. Does this mean that despite this > > capability, each /etc/fstab entry requires full type >

Re: [beagleboard] Having trouble installing new debian image into beaglebone black?

On Tue, Feb 14, 2017 at 4:17 PM, wrote: > So I have followed the instructions and when I put the micro SD card into > the beagle bone and turn it on, only one led is flashing. The instructions > guides says all four should be flashing and will stay lit when it is done.

[beagleboard] Having trouble installing new debian image into beaglebone black?

So I have followed the instructions and when I put the micro SD card into the beagle bone and turn it on, only one led is flashing. The instructions guides says all four should be flashing and will stay lit when it is done. -- For more options, visit http://beagleboard.org/discuss --- You

Re: [beagleboard] BeagleBone Green Board Cannot Connect to Internet

On Tue, Feb 14, 2017 at 3:42 PM, Steve Albright wrote: > After sharing my laptop wifi connection with the BBB ethernet connection, I > am able to connect to the Internet intermittently. > > However, sharing the wifi connection with the USB connection is not >

Re: [beagleboard] How to prevent flashing SD card image to eMMC?

> I was able to mount the card without knowing the type, apparently mount is > smart enough to determine on its own. Does this mean that despite this > capability, each /etc/fstab entry requires full type specification? Yet, you specified the partition number. >> /uEnv.txt is just for backwards

Re: [beagleboard] BeagleBone Green Board Cannot Connect to Internet

After sharing my laptop wifi connection with the BBB ethernet connection, I am able to connect to the Internet intermittently. However, sharing the wifi connection with the USB connection is not resulting in any network connectivity. Should I be able to only use the USB connection to connect

Re: [beagleboard] How to prevent flashing SD card image to eMMC?

On Tuesday, February 14, 2017 at 10:31:46 AM UTC-8, RobertCNelson wrote: > > ... > 1) Is there a reason that the SD card isn't in /etc/fstab to make > mounting > > simple for beginners - or auto-mounted? In other words, is that a bad > idea > > to be avoided? Perhaps an issue with trying

[beagleboard] How to create a Device Tree Overlay for CANBus on SPI Board?

Hi, I have mikroBUS Cape board from https://learn.mikroe.com/mikrobus-cape-beaglebone-shield/ and I use DTS file from https://github.com/MikroElektronika/MikroBUS_Cape/blob/master/BB-MIKROBUS-01-00A1.dts I tested reading data from spi 1-1 device and it works. I am connecting a CANBus interface

Re: [beagleboard] seedstudio Grove Cape on BBG

Hello This is the V2 version of the cape. -- Ronald Von Grouikenstroumpf Sent with Airmail On 14 February 2017 at 20:10:24, Robert Nelson (robertcnel...@gmail.com) wrote: On Tue, Feb 14, 2017 at 11:40 AM, Rva wrote: > on a IOT Image

Re: [beagleboard] seedstudio Grove Cape on BBG

On Tue, Feb 14, 2017 at 11:40 AM, Rva wrote: > on a IOT Image :bone-debian-8.6-iot-armhf-2016-11-06-4gb.img > > Linux beaglebone 4.4.30-ti-r64 #1 SMP Fri Nov 4 21:23:33 UTC 2016 armv7l > GNU/Linux > > > > Dmesg , shows me some errors > > > [2.302582] bone_capemgr

Re: [beagleboard] BeagleBone Green Board Cannot Connect to Internet

On Tue, Feb 14, 2017 at 12:03 PM, Steve Albright wrote: > > Hi, > > > I am running Cloud9 from a BeagleBone Green board and am experiencing > problems accessing files on the Internet. Here are two example commands that > have failed: > > >

Re: [beagleboard] How to prevent flashing SD card image to eMMC?

On Tue, Feb 14, 2017 at 12:25 PM, ags wrote: > Well yes, I can mount and edit. It didn't occur to me that a card inserted > after boot would be detected. Thanks for that advice. Following up with more > on the topic: > > 1) Is there a reason that the SD card isn't in

Re: [beagleboard] How to prevent flashing SD card image to eMMC?

Well yes, I can mount and edit. It didn't occur to me that a card inserted after boot would be detected. Thanks for that advice. Following up with more on the topic: 1) Is there a reason that the SD card isn't in /etc/fstab to make mounting simple for beginners - or auto-mounted? In other

[beagleboard] BeagleBone Green Board Cannot Connect to Internet

Hi, I am running Cloud9 from a BeagleBone Green board and am experiencing problems accessing files on the Internet. Here are two example commands that have failed: root@beaglebone:/var/lib/cloud9/examples/aws-iot-device-sdk-js/awsCerts# npm install npm@latest -g npm ERR! network tunneling

[beagleboard] BBB android

Is Android being actively supported on BBB? I found resources online which said Android 4.4 was ported sometime back - http://www.2net.co.uk/tutorial/android-4.4-beaglebone Does it make sense to support the latest Android versions on the BBB? is there an audience for such a project? I know its

[beagleboard] seedstudio Grove Cape on BBG

on a *IOT Image :bone-debian-8.6-iot-armhf-2016-11-06-4gb.img* Linux beaglebone 4.4.30-ti-r64 #1 SMP Fri Nov 4 21:23:33 UTC 2016 armv7l GNU/Linux Dmesg , shows me some errors [2.302582] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,BBG1,BBG216060130' [2.302615] bone_capemgr

Re: [beagleboard] Re: Microchip mcp2515, can over spi, not working. Wrong device tree overlay?

Hi, Did you ever get the MCP2515 working over SPI? I'm attempting that now, but I'm not sure where to start. Thanks, Mark On Tuesday, 20 September 2016 14:30:39 UTC+1, Laurits Telle Riple wrote: > > After chatting in the IRC channel with Matthijs I was encouraged to not > use overlays,

Re: [beagleboard] xrandr Can't open display

i don't see that you started the X server---it needs to be running for any of this to work. On Tue, Feb 14, 2017 at 7:19 AM, Sajeev Krishnan wrote: > Hi, > > > I am working with a Beaglebone Black with Debian Jessie. > > I am trying to interface with an LG 19M38H - B LCD

Re: [beagleboard] BeagleBone Black shipments

No Gerald On Tue, Feb 14, 2017 at 8:56 AM, Graham wrote: > Is CircuitCo still actively building BeagleBone Blacks? > > --- Graham > > == > > On Tuesday, February 14, 2017 at 8:05:01 AM UTC-6, Jason Kridner wrote: >> >> CircuitCo shipped a bit under 300,000. >> Element14

Re: [beagleboard] BeagleBone Black shipments

Is CircuitCo still actively building BeagleBone Blacks? --- Graham == On Tuesday, February 14, 2017 at 8:05:01 AM UTC-6, Jason Kridner wrote: > > CircuitCo shipped a bit under 300,000. > Element14 has shipped around 350,000. > I believe GHI has shipped around 15,000. > > Add to that original

Re: [beagleboard] BeagleBone Black shipments

CircuitCo shipped a bit under 300,000. Element14 has shipped around 350,000. I believe GHI has shipped around 15,000. Add to that original BeagleBone sales, compliant and compatibles and I'm pretty sure there are over 1 million in circulation. > On Feb 14, 2017, at 8:15 AM, Gerald Coley

[beagleboard] xrandr Can't open display

Hi, I am working with a Beaglebone Black with Debian Jessie. I am trying to interface with an LG 19M38H - B LCD display through its HDMI port. 1) When I am running the command sudo apt-get install read-edid xserver-xorg-video-fbdev xserver-xorg-video-modesetting x11-xserver-utils I am

Re: [beagleboard] BeagleBone Black shipments

I have no idea. I would guess somewhere around 450,000. Gerald On Tue, Feb 14, 2017 at 1:48 AM, Heinz Hummel wrote: > Hi, > > I already know the updated list of original BBB shipments from the Wiki. > But just for my personal interest: does anybody have an idea how

Re: [beagleboard] Building BBB kernel and rootfs

Hi, If you want to use mail line kernel, latest stable kernel is 4.9.y. you can generate both zImage and uImage. By default, if you do make then it will generate zImage. usually I don't build rootfs, I will take rootfs from https://eewiki.net/display/linuxonarm/BeagleBone+Black this path.

[beagleboard] Building BBB kernel and rootfs

Hi, I had 3.8 version source for compiling and building kernel source. I used to build and replace zImage and DTB to pre formated SDCARD. This works fine for me to see all my changes. Now, I'm planning to move one step ahead. I'm planning to take upgraded kernel version. Question: which