Thanks! It worked!
I still don't understand how it was booting off of the eMMC, because I
have the microSD inserted.
If I had re-flashed the bootloader using the instructions on the bbb
website, would it still have worked? or would I still have to apply
the fix you mentioned earlier?
On Wed, Nov
Hey Robert, thanks for responding promptly. Here is the output:
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
git:/opt/scripts/:[2ce750d881941c5189db9e189af90517e11c079f]
eeprom:[A335BNLTBWA51650BBWG1172]
dogtag:[BeagleBoard.org Debian Image 2017-08-31]
bootloader:[microSD-(push-button)]
Can you please tell me how to install audio & video drivers in beaglebone
using linux operating system.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and
Hi,
There is no open source support of WiLink8 drivers in anything apart from
Linux. So quick answer is no.
If you are looking for a commercial port to an RTOS you could try
www.clarinox.com. They have typically ported to ARM cortex-M devices so
they may have nothing to run on BBB in FreeRTOS.
I
You could write a memory compare check in MLO to see that the file is
indeed loaded correctly to help debug the problem. I wrote a routine to
write the memory address to each cell in memory and then compare. Not
totally comprehensive for stuck bits, but gave a warm fuzzy that memory was
somewha
I see that the has the following VNCs; tightvncviewer, vncviewer &
xvnc4viewer. But Ido not know how to start them up.
But when I try just the basic command of "sudo tightvncserver" I get an
error of command not found.
How does one start up VNC on the PocketBeagle?
--
For more options, vis
Hi Kumar,
I am also having some troubles with rpmsg, having migrated from 4.4 to 4.9.
Your instructions seem to work fine, at least when I run my program for the
first time. If I want to change the firmware for the PRU, I have to remove
the pru_rproc module, but when I load the module again I
On Thu, Nov 30, 2017 at 7:55 AM, wrote:
> Hi Kumar,
>
> I am also having some troubles with rpmsg, having migrated from 4.4 to 4.9.
>
> Your instructions seem to work fine, at least when I run my program for the
> first time. If I want to change the firmware for the PRU, I have to remove
> the pr
Hi,
I'm just getting started on this great platform and I've got some questions
about capes/overlays on which I thought perhaps someone could share their
expertise.
Most of the documentation you find online still refers to cape manager and
slots, which is slightly confusing for beginners. I di
sudo: /opt/scripts/tools/version.sh: command not found
I'm running 4.4.30-ti-r64
On Tuesday, November 28, 2017 at 11:50:05 AM UTC-6, RobertCNelson wrote:
>
> Hi Joseph,
>
> On Mon, Nov 27, 2017 at 10:31 PM, >
> wrote:
> > I've been trying for hours to get PRU working on the latest supported
On Thu, Nov 30, 2017 at 6:50 PM, wrote:
> Hi,
>
> I'm just getting started on this great platform and I've got some questions
> about capes/overlays on which I thought perhaps someone could share their
> expertise.
>
> Most of the documentation you find online still refers to cape manager and
> s
On Thu, Nov 30, 2017 at 8:54 PM, Joseph Foster
wrote:
> sudo: /opt/scripts/tools/version.sh: command not found
>
> I'm running 4.4.30-ti-r64
"confused" ... you said:
"I've been trying for hours to get PRU working on the latest supported kernel"
4.4.30-ti-r64 release …
RobertCNelson committed o
I'm not sure really what librobotics is, and Debian 9.x (Stretch) would be
preferred.
On Thursday, November 30, 2017 at 9:31:29 PM UTC-6, RobertCNelson wrote:
>
> On Thu, Nov 30, 2017 at 8:54 PM, Joseph Foster
> > wrote:
> > sudo: /opt/scripts/tools/version.sh: command not found
> >
> > I'm
On Thu, Nov 30, 2017 at 9:50 PM, Joseph Foster
wrote:
> I'm not sure really what librobotics is, and Debian 9.x (Stretch) would be
> preferred.
Then pick your base: (bone-XYZ.img.xz files)
https://rcn-ee.net/rootfs/bb.org/testing/2017-11-26/
Use etcher.io to create the microSD
Stretch ships wi
How do I upgrade to v4.14.x-bone, the update_kernel.sh only lists TI kernels
On Thursday, November 30, 2017 at 9:57:13 PM UTC-6, RobertCNelson wrote:
>
> On Thu, Nov 30, 2017 at 9:50 PM, Joseph Foster
> > wrote:
> > I'm not sure really what librobotics is, and Debian 9.x (Stretch) would
> be
>
On Nov 30, 2017 10:33 PM, "Joseph Foster"
wrote:
How do I upgrade to v4.14.x-bone, the update_kernel.sh only lists TI kernels
--bone-kernel --lts-4_14
Regards,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Thanks for the explanation, but could you elaborate a bit more on it?
As far as I understand the world as it is now works this way:
0- If you are running anything beyond kernel 4.1 you should be using uboot
overlays. Be careful to load the latest bb-cape overlays and be sure that
uboot is the
Where would the slots file now be located. Its not in
the /sys/devices/platform/bone_capemgr/ directory for me
On Thursday, November 30, 2017 at 10:55:35 PM UTC-6, RobertCNelson wrote:
>
>
>
> On Nov 30, 2017 10:33 PM, "Joseph Foster" > wrote:
>
> How do I upgrade to v4.14.x-bone, the update_ker
18 matches
Mail list logo
