Hi All
I have a BBB booting from the uSD into Debian Stretch GUI.
The Image is 4.14-108-ti-r119
All updates current.
My problem is that the mouse takes 1 minute from when the pointer is first
visible to when it responds to mouse movements.
By this time the gui is complete on the screen.
If I
Network not working on BeagleBone black
getting error on bootup
libphy: PHY 4a101000.mdio:01 not found
net eth0: phy 4a101000.mdio:01 not found on slave 1
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are
If you have a need for extended temperature range, check out the BeagleBone
Black Industrial from element14. -40 to +85 C
https://beagleboard.org/e14-bbbi
Don
On Thu, May 7, 2020, 5:20 PM Claude Sammut wrote:
>
> Hello!
> I was trying to find the operating temperatures for the BBBW but I
soldered a DC power header to turn it on without the secondary controller
board that comes with the miner
used the image you recommended without success.. it just refuses to boot
flashed the original firmware using hdd raw copy tool and it boots normally
original firmware
Well, that documentation seems to be quite old and the shell script itself
seems to indicate that I should be using a different path to a composite
gadget (via libcomposite?), no? It also doesn't seem like I need to hack
the driver for things llike Ethernet anymore. Finally, that link only
There is a hangup when trying gpio 5 (p9.17) :
config-pin for it works, but
/sys/devices/platform/ocp/4804c000.gpio/gpiochip1/gpio/gpio5/
does not exist
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
On Thu, May 7, 2020 at 4:20 PM Claude Sammut wrote:
>
>
> Hello!
> I was trying to find the operating temperatures for the BBBW but I could not
> find any official documentation other than that of the octavo processor. can
> perhaps someone shed some light or point me to the right direction
Hello!
I was trying to find the operating temperatures for the BBBW but I could
not find any official documentation other than that of the octavo
processor. can perhaps someone shed some light or point me to the right
direction
--
For more options, visit http://beagleboard.org/discuss
---
Did you ever get an official reply on this?
On Wednesday, 27 February 2019 17:48:04 UTC+1, Diogo Melo wrote:
>
> I couldn't find the operating temperature for the Black Wireless
> specifically, does anyone know what is the operating temperature?
>
--
For more options, visit
This seems to do the trick:
/sys/devices/platform/ocp/4804c000.gpio/gpiochip1/gpio/
but I'm not 100% done.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group
https://www.kernel.org/doc/Documentation/usb/gadget_multi.rst
On Thu, May 7, 2020 at 1:48 AM Andrew P. Lentvorski
wrote:
> Is there a way to configure extra USB gadget endpoints in addition to the
> BBB default ones or do I just have to go in and edit the am335x_evm.sh
> script?
>
> Thanks.
>
>
On Thu, May 7, 2020 at 12:22 PM maxmike wrote:
>
> I was hopeful to return here after weaving my system together and thank @rcn
> for all his help,
> but I'm not out of the woods yet.
> All the pins initialize correctly (even 8.13 pwm, which is now in a new file)
> but as soon
> as I write the
I was hopeful to return here after weaving my system together and thank
@rcn for all his help,
but I'm not out of the woods yet.
All the pins initialize correctly (even 8.13 pwm, which is now in a new
file) but as soon
as I write the value 47 into /sys/class/gpio/export pin 8.15 disappears
On Thu, 7 May 2020 06:43:12 -0700 (PDT), in
gmane.comp.hardware.beagleboard.user kenneth fields
wrote:
>Must be able to move a 5000 pound load. here is where the servo outputs of
The load is pretty much irrelevant -- it is dependent solely upon the
specifications of the actuator itself
Hello,
I am in the beginning stages of my first robot design and have a question
on the beaglebone Blue board.
basic specs for my robot:
Must be able to lift 5000 a pound load. ( accomplished)
Must be able to move a 5000 pound load. here is where the servo outputs of
the BBB would come in
Is there a way to configure extra USB gadget endpoints in addition to the
BBB default ones or do I just have to go in and edit the am335x_evm.sh
script?
Thanks.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
So, I got in contact with the vendor and apparently this is the right
command sequence for my display:
SPI_WriteComm (0x11);
delay(300);
SPI_WriteComm (0xFF);
SPI_WriteData (0x77);
SPI_WriteData (0x01);
SPI_WriteData (0x00);
SPI_WriteData (0x00);
SPI_WriteData (0x10);
SPI_WriteComm (0xC0);
17 matches
Mail list logo
