So now I found out that my board doesn't even give a HDMI output on any TV
which is bigger than 32 inches. I have tried forcing different resolutions
but no luck. Its only giving display on a smaller size TV. What do you
think might cause this issue? Is it due to inverted colors?
Thank you
On
On Mon, Jan 7, 2019 at 9:10 AM wrote:
>
> I have tried with latest 4.14 kernel and 4.9 both. Both of these kernels have
> the flag added in their tilcdc files. I have tried adding blue-and-red-wiring
> = "crossed" in am335x-boneblack.dts and I even tried adding same in
> BB-HDMI-TDA998x-00A0.dt
I have tried with latest 4.14 kernel and 4.9 both. Both of these kernels
have the flag added in their tilcdc files. I have tried adding
blue-and-red-wiring = "crossed" in am335x-boneblack.dts and I even tried
adding same in BB-HDMI-TDA998x-00A0.dts overlay. But none of these worked
for me. So I
> On Jan 4, 2019, at 9:05 AM, sam.abb...@gmail.com wrote:
>
> Hi Jason,
>
> I have tried adding "blue-and-red-wiring = "crossed"" in my device tree, but
> it doesn't change anything.
If nothing changed, either the flag might be wrong or you have a kernel version
that doesn’t support the flag
Hi Jason,
I have tried adding "blue-and-red-wiring = "crossed"" in my device tree,
but it doesn't change anything.
Is there a way I can look up if my display is RGB565 or BGR565?
Thank you
On Friday, January 4, 2019 at 12:02:27 AM UTC-7, Jason Kridner wrote:
>
>
>
> On Jan 3, 2019, at 4:01 PM,
> On Jan 3, 2019, at 4:01 PM, Robert Nelson wrote:
>
>> On Thu, Jan 3, 2019 at 3:58 PM wrote:
>>
>> I have the schematics and I followed them to come up with the clone.
>> Everything on the hardware side seems correct but for some reason I get
>> inverted red and blue.
>
> Which just leave
On Thu, Jan 3, 2019 at 3:58 PM wrote:
>
> I have the schematics and I followed them to come up with the clone.
> Everything on the hardware side seems correct but for some reason I get
> inverted red and blue.
Which just leaves your hdmi switch connection..
Regards,
--
Robert Nelson
https://
I have the schematics and I followed them to come up with the clone.
Everything on the hardware side seems correct but for some reason I get
inverted red and blue.
On Thursday, January 3, 2019 at 2:49:51 PM UTC-7, RobertCNelson wrote:
>
> On Thu, Jan 3, 2019 at 3:36 PM > wrote:
> >
> > Yes its
On Thu, Jan 3, 2019 at 3:36 PM wrote:
>
> Yes its not. On clone, the output from NXP TDA19988, is going to a HDMI
> switch rather than going to micro HDMI port, and the output from switch goes
> to HDMI connector.
> Do TDMA pins invert somewhere from micro HDMI port to HDMI cable with
> beagleb
Yes its not. On clone, the output from NXP TDA19988, is going to a HDMI
switch rather than going to micro HDMI port, and the output from switch
goes to HDMI connector.
Do TDMA pins invert somewhere from micro HDMI port to HDMI cable with
beaglebone?
On Thursday, January 3, 2019 at 2:20:00 PM
On Thu, Jan 3, 2019 at 3:14 PM wrote:
>
> Hi Robert,
>
> I tested debian-9.6 from the link you provided, and the colors on my clone
> board are still inverted.
> I tested the same image on beaglebone and the colors were correct.
>
> Please see my log below for the clone:
>
> U-Boot 2018.09-2-
Hi Robert,
I tested debian-9.6 from the link you provided, and the colors on my clone
board are still inverted.
I tested the same image on beaglebone and the colors were correct.
Please see my log below for the clone:
U-Boot 2018.09-2-gd5b4c4b656 (Oct 19 2018 - 14:16:02 -0500), Build:
jenk
On Thu, Jan 3, 2019 at 1:56 PM wrote:
>
> Hi Robert,
>
> Here below is my boot log:
> """
> U-Boot 2018.09-2-gd5b4c4b656 (Oct 19 2018 - 14:16:02 -0500), Build:
> jenkins-
> github_Bootloader-Builder-84
>
> CPU : AM335X-GP rev 2.1
> I2C: ready
> DRAM: 512 MiB
> No match for driver 'omap_hs
Hi Robert,
Here below is my boot log:
"""
U-Boot 2018.09-2-gd5b4c4b656 (Oct 19 2018 - 14:16:02 -0500), Build:
jenkins-
github_Bootloader-Builder-84
CPU : AM3
I am forcing hdmi resolution through uEnv.txt by un-commenting following:
cmdline=coherent_pool=1M net.ifnames=0 quiet video=HDMI-A-1:1024x768@60e
And I think its forcing display to 24bpp and it is inverting blue and red
color.
I can not get a HDMI display without forcing the resolution. Is the
I am using 16bit with nxp tda 19988.
On Wednesday, December 19, 2018 at 11:19:33 AM UTC-7, RobertCNelson wrote:
>
> On Wed, Dec 19, 2018 at 12:10 PM >
> wrote:
> >
> > Hi All,
> >
> > I have a beaglebone black clone and on the HDMI output red and blue
> color are inverted. I am using debian
On Wed, Dec 19, 2018 at 12:10 PM wrote:
>
> Hi All,
>
> I have a beaglebone black clone and on the HDMI output red and blue color are
> inverted. I am using debian 9.5 with kernel 4.14.71-ti-r80.
>
> I have tried changing blue-and-red-wiring = "crossed"; in the device tree and
> also un-commente
Hi All,
I have a beaglebone black clone and on the HDMI output red and blue color
are inverted. I am using debian 9.5 with kernel 4.14.71-ti-r80.
I have tried changing blue-and-red-wiring = "crossed"; in the device tree
and also un-commented "video-ports = <0x234501>;" in this file:
https://g
18 matches
Mail list logo
