>
> I bow to the expert and throw away any calculations based on worst case
> scenarios and any experience I have had with 1000s of boards.
>
> Some may indeed work. A lot will not. I choose to err on the side of will
> not.
>
> Gerald
hahah, no Gerald, I've not tested 1000's of boards. only 5,
I bow to the expert and throw away any calculations based on worst case
scenarios and any experience I have had with 1000s of boards.
Some may indeed work. A lot will not. I choose to err on the side of will
not.
Gerald
On Mon, Aug 8, 2016 at 3:20 PM, William Hermans wrote:
>
> USB power is enough to power the ethernet. I've been doing this since 2013
> . . .
>
However, you can not use any other peripherals, or the board will start
behaving inconsistently. FOr instance, I can run ethernet all day long with
only USB power, I can even use the serial debug port with
USB power is enough to power the ethernet. I've been doing this since 2013
. . .
On Mon, Aug 8, 2016 at 1:20 PM, Gerald Coley wrote:
> USB power is not enough to power the Ethernet.
>
> Gerald
>
> On Mon, Aug 8, 2016 at 3:14 PM, evilwulfie wrote:
>
On Mon, Aug 8, 2016 at 11:54 AM, Denis Cosmin wrote:
> Yesterday the board didn't freeze. Today I tried to connect the ethernet
> cable to the board and some USR leds lighted up and remained stuck. I've
> lost the ssh connection and the board became unresponsive. If I
get a 2 amp 5v power supply to power your board.
some times if you try to power from usb there is not enough power to run
everything.
On 8/8/2016 1:12 PM, Denis Cosmin wrote:
> Via USB cable. It's my first board, never owned any other board before.
>
> On Monday, August 8, 2016 at 9:59:30 PM
Via USB cable. It's my first board, never owned any other board before.
On Monday, August 8, 2016 at 9:59:30 PM UTC+3, Wulf Man wrote:
>
> how are you powering the board
>
> On 8/8/2016 11:54 AM, Denis Cosmin wrote:
>
> Yesterday the board didn't freeze. Today I tried to connect the ethernet
>
how are you powering the board
On 8/8/2016 11:54 AM, Denis Cosmin wrote:
> Yesterday the board didn't freeze. Today I tried to connect the
> ethernet cable to the board and some USR leds lighted up and remained
> stuck. I've lost the ssh connection and the board became unresponsive.
> If I