Am 29.02.2012 23:49, schrieb Ken Moffat:
> Perhaps I was a little too terse in that reply. Although we may
> have put packages in 'build order' in the distant past (when we had
> far fewer packages in the book), we've long-ago moved away from
> that. Among other reasons is that package dependen
If you are building any of gnome-3, please remember that the packages
are listed in alphabetical order within the various sections. You *will*
need to work out which 'utilities' you want to build, and then work back
to find a correct order for all their dependencies. Hope some of you
enjoy soem
I tried eggdbus 0.6 and found strange errors which I am not able to explain but
could leave to errors with polkit install:
...
Warning: unable to resolve '%org.freedesktop.DBus.Error.OOM'
...
...
Warning: unable to resolve '#Tweak'
...
...
Making all in man
make[3]: Entering directory `/sources/e
> >
> > does this make sense to anybody ?
> > do I have to reinstall libxslt / pam / whatever or has anybody tried
> > eggdbus 0.6 with polkit 0.96 ?
> >
> > Olaf
>
> Ran into this myself, because I forgot to install 'DocBook XML
> DTD-4.5' (and not sure, but it may be possible to get around this
Hi everybody,
One remark for sqlite - instructions:
to install the documentation you are using the "unzip" command.
this command is not available on the system if you do not put it as a
requirement for installation.
Best regards
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
> I've just downloaded and compiled firefox-3.0.1.
> When firefox-2 appeared there was a discussion here, because there
> were some problems. Well, I just want to let you know that firefox-3
> didn't compile well, but 3.0.1 does. The mozconfig and basic
> instructions in the book work well. The LD_
Hello everybody,
I am having problems with gdm.
I installed gdm-2.22.0 with no problems but when starting it shows a
message:
gdm-binary Warning
Failed to acquire org.gnome.DisplayManager: Connection ":1.3" is not
allowed to own the service "org.gnome.DisplayManager" due to security
policies in
Hi,
I am installing gnome-2.22. Yelp and Epiphany complain about gecko
missing. I have installed firefox 3.0. Firefox is working !
Do I need something else ? Any hints ?
Greetings
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.ht
Hi everyone,
I have a question about working with sed.
I have an xml file containing
1
I want to change this to
2
I have problems with the "<" and ">" signs. Is there a was to mask them
in the sed command?
sed s/"1"/"2"/g' test.xml
does not work
Greetings
Olaf
--
http://linuxfromsc
Hi,
Do you have problems with gnome-2.20?
Such as freezing desktop after hovering over music files (music-preview)
Such as ofter crashing nautilus and epiphany
Such as not working desktop background preferences ?
Olaf
Am Mittwoch, den 09.01.2008, 07:47 + schrieb Luke Vear:
> Hey my fellow l
at the moment links for faac and faad are pointing to the same
sourceforge website where faac is not downloadable.
this link might be better.
http://www.audiocoding.com/downloads.html
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq
I have successfully configured and compiled the d-bus-python 0.82.0
package.
when I make install, I get the following error:
/usr/src/dbus-python-0.82.0/install-sh -c -m 644 'service.py'
'/usr//lib/python2.5/site-packages/dbus/service.py'
/usr/src/dbus-python-0.82.0/install-sh -c -m 644 'types.p
Hi everybody,
installing cups on my system was easily done with the blfs instructions,
many thanks. But I had problems configuring. I found out that my kernel
didn't include the parallel port support and printing support from the
beginning. Maybe mentioning this in the cups instructions will be
he
for me the combination of lfs-6.2 and svn-blfs-book gave me problems
because of the kernel headers being too old for hal.
lfs-6.3 with recent blfs-books gave me no problems so far.
Olaf
Am Dienstag, den 06.11.2007, 22:33 +0500 schrieb M. Shuaib Khan:
> On Nov 6, 2007 9:56 PM, Chris <[EMAIL PROT
> > Warning: couldn't find charset data for locale [EMAIL PROTECTED]; using ISO
> > 8859-1.
>
> I think this is a problem in luit. The default location luit looks for
> the locale data isn't the same place it's installed by libX11. Try
> reinstalling luit, but pass
> --with-localealiasfile='${data
> > When a regular user logs into the system I get the message:
> > Password:
> > -bash: /dev/null: Permission denied
> > -bash: /dev/null: Permission denied
> >
> > When I change the permissions of /dev/null
> > chmod 666 /dev/null
> >
> > I have no problems logging in.
> >
> > I guess this i
I have problems with gnome stability and I suppose this has to do with
xorg-7.2
nautilus freezes,
panel freezes
a playing totem or an open epiphany keeps working
I have to kill x11 with crt-alt-backspace
starting the x-server after such a freezing is possible, but
gnome won't come up, just the
I got it working :-)
I had a soundchip on board and didn't notice that alsamixer was treating
that chip instead of the soundcard chip.
> I am coming closer :-)
>
> my udev-rules for alsa look like this at the moment
> # /etc/udev/rules.d/40-alsa.rules
> KERNEL=="controlC[0-9]*",GROUP="a
When a regular user logs into the system I get the message:
Password:
-bash: /dev/null: Permission denied
-bash: /dev/null: Permission denied
When I change the permissions of /dev/null
chmod 666 /dev/null
I have no problems logging in.
I guess this is a udev problem, but I wonder why nobody el
The links for the dhcp package do not work anymore,
http://gd.tuwien.ac.at/infosys/servers/isc/dhcp/dhcp-3.0.6.tar.gz
this is the recent package.
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above infor
nd no sound is produced with
programs like ogg123 ...
these are the instructions in the book
cat > /etc/udev/rules.d/40-alsa.rules << "EOF"
# /etc/udev/rules.d/40-alsa.rules
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", ACTION==&
It says that gconf is an option, but if you want to install totem later
on I think it is a requirement
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Hi,
I have build lfs-6.3r1 with the corresponding kernel and this is the
first time that I have problems with alsa.
My devices:
###
[EMAIL PROTECTED]:~# ls /dev/m
memmicrocode midiC1D0 mixer1 mouse0
mice midi1 mixer mixer2 msr0
[EMAIL PROTECTED]:~# ls
it says
--sysconfdir=/etc/gnome/2.14.3 &&
shouldn't this be
--sysconfdir=/etc/gnome/2.18.3 &&
regards
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
> > > hal-0.5.9.1 needs newer kernel headers. Either keep using old hal or
> > > update your glibc/kernel headers.
> > >
> >
> > > SW_MAX is defined in /usr/include/linux/input.h on newer kernel headers.
> > >
> > > --
> > > Dan
> >
> > where can I find new kernel headers? Most recent I found was
Am Sonntag, den 05.08.2007, 12:53 -0700 schrieb Dan Nicholson:
> On 8/5/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> > I have got hal - compile -troubles.
> > Can somebody give me a clue, what my problem is?
> >
> > Olaf
> >
> > hal-0.5.9.1
>
I have got hal - compile -troubles.
Can somebody give me a clue, what my problem is?
Olaf
hal-0.5.9.1
make[4]: Entering directory `/usr/src/hal-0.5.9.1/hald/linux'
Making all in probing
make[5]: Entering directory `/usr/src/hal-0.5.9.1/hald/linux/probing'
gcc -DHAVE_CONFIG_H -I. -I../../.. -DPAC
Am Dienstag, den 26.06.2007, 11:35 -0700 schrieb Dan Nicholson:
> On 6/26/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> >
> > It solved something at least.
> > The menus are now populated with applications.
> > The rest of the problems is still valid.
> > *
> This is clearly a problem. If gconf is configured with
> --sysconfdir=/etc/gnome/2.18.1, then all schemas should be installed
> in /etc/gnome/2.18.1/gconf. It will not use /etc/gconf unless you add
> entries to that path file.
>
> Here it seems that if you're using gconf with metacity, then it s
Am Dienstag, den 26.06.2007, 05:54 -0600 schrieb Shawn:
> On June 26, 2007, Olaf Grüttner wrote:
> > I start xorg with startx
> >
> > my .xinitrc contains
> > gnome-terminal &
> > exec dbus-launch --exit-with-session fluxbox
> >
> > I have usual m
I start xorg with startx
my .xinitrc contains
gnome-terminal &
exec dbus-launch --exit-with-session fluxbox
I have usual mouse mouvements and keyboard behavior is as usual.
I start a gnome-app e.g. totem from gnome-terminal.
After totem appears, the mouse movements are accellerated and the
keybo
When starting gnome-2.18 I have an empty panel and 2 icons (computer and
trash), the mouse movements are accellerated and faster than usual. No
warnings or infos are given...!
I took the blfs-svn instructions and recent gnome-packages.
What can I check to get this stupid gnome desktop stuff to w
Am Mittwoch, den 13.06.2007, 11:06 -0700 schrieb Dan Nicholson:
> On 6/13/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> > A question for the people out there who have successfully compiled
> > gnome-2.18:
> > what versions of dbus, dbus-glib, hal and python-gnom
A question for the people out there who have successfully compiled
gnome-2.18:
what versions of dbus, dbus-glib, hal and python-gnome-desktop are you
using?
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the a
Am Mittwoch, den 06.06.2007, 05:54 -0700 schrieb Dan Nicholson:
> On 6/5/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> >
> > when I start x there is a short panel at the top with no buttons at all.
> > Cursor movements are twice as fast as usual and acceleration it too
I have compiled most of gnome-2.18 and configured it accordingly to the
svn-book.
when I start x there is a short panel at the top with no buttons at all.
Cursor movements are twice as fast as usual and acceleration it too
high. A window pops up saying: can't load default theme, either metacity
no
In March I heard that gnome-2.18 will be some 8 days away.
I am in desperate need for some help and I am willing to test if the
instructions are not perfect right from the beginning.
Is there something planned as a release dates?
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-suppo
I have installed most of gnome-2.18 with the current instructions of the
blfs-svn book. I have changed instructions only in one point
instead of --sysconfdir=/etc/gnome/2.14.3 I have taken
--sysconfdir=/etc/gnome and kept this consistent to all packages that
needed this change.
When I start gnome
Am Donnerstag, den 20.10.2005, 09:35 + schrieb Lennon Cook:
> I'm having two annoying problems with my GNOME environment, and both
> seem to be to do with GConf settings. The first is that most apps
> aren't obeying my UI settings (detachable toolbars off, icon settings
> = icons only). About
Am Dienstag, den 15.05.2007, 11:41 -0700 schrieb Dan Nicholson:
> On 5/15/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> > Am Montag, den 14.05.2007, 06:18 -0700 schrieb Dan Nicholson:
> > >
> > > http://svn.gnome.org/viewcvs/jhbuild/trunk/patches/hal-dbus_c
Am Montag, den 14.05.2007, 06:18 -0700 schrieb Dan Nicholson:
> On 5/14/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> >
> > I compiled hal-0.5.7.1 and the error is:
> >
> > make[3]: Entering directory `/usr/src/hal-0.5.7.1/tools'
> > if gcc -DHAVE_CONF
Am Montag, den 14.05.2007, 22:40 +1200 schrieb Simon Geard:
> On Mon, 2007-05-14 at 22:47 +0200, Olaf Grüttner wrote:
> > As far as I can tell this url contains the latest headers.
> > http://ep09.pld-linux.org/~mmazur/linux-libc-headers/
> > linux-libc-headers-2.6.12.0.
Am Freitag, den 11.05.2007, 15:33 -0700 schrieb Dan Nicholson:
> On 5/11/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> > Am Donnerstag, den 10.05.2007, 12:12 -0700 schrieb Dan Nicholson:
> > > On 5/10/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> > >
&
Am Samstag, den 12.05.2007, 18:05 +0200 schrieb Tijnema !:
> On 5/11/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> > Hi everybody,
> >
> > please change
> >
> > wget -B http://xorg.freedesktop.org/releases/individual/app/ \
> > -i ..
Am Donnerstag, den 10.05.2007, 12:12 -0700 schrieb Dan Nicholson:
> On 5/10/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
>
> > probe-input.c: In function 'main':
> > probe-input.c:61: error: 'SW_MAX' undeclared (first use in this
> > function)
&
Am Donnerstag, den 10.05.2007, 06:31 -0700 schrieb Dan Nicholson:
> On 5/10/07, Olaf Grüttner <[EMAIL PROTECTED]> wrote:
> > Hi everybody,
> >
> > I am on a quest to compiling and installing gnome-2.18.
> > I have taken the instructions from the blfs-book (gno
Hi everybody,
I am on a quest to compiling and installing gnome-2.18.
I have taken the instructions from the blfs-book (gnome-2.14) and
adjusted package-versions when the configure command complained.
So far so good, but now hal-0.5.9 gives me compiling problems with no
indication that this is
Hi everybody,
please change
wget -B http://xorg.freedesktop.org/releases/individual/app/ \
-i ../app-7.1.wget
to
wget -B http://xorg.freedesktop.org/releases/individual/app/ \
-ci ../app-7.1.wget
===
Greetings
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
Hi everybody,
please change
wget -B http://xorg.freedesktop.org/releases/individual/app/ \
-i ../app-7.1.wget
to
wget -B http://xorg.freedesktop.org/releases/individual/app/ \
-ci ../app-7.1.wget
===
Greetings
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-suppor
Hi,
I am having problems configuring libbonobo.
I have libxml2, orbit and xml:parser installed.
I have xorg installed.
The message below confuses me, because there is no package gobject, gthread and
ORBit-Cosnaming in the blfs-book. Any clues? Why is the configure script
checking for libbonob
> On Wed, 2006-02-08 at 19:13 +0100, Olaf Grüttner wrote:
> > gnome-audio is dependent on pkg-config
>
> You sure? Looking through it, it doesn't appear to require it, and
> doesn't provide a .pc file - going by the date on the tarball, I'd say
> pkg-config di
> >
> > I don't know why you didn't mention setting the XDG_DATA_DIRS variable.
> > It says to do it in the instructions of at least two packages you had
> > to install. You also need to set the LIBGLADE_MODULE_PATH variable.
>
> One thing I've found is that if XDG_..._DIRS are not the default, th
Hi,
I have problems running gnome-2.12. When gnome starts there is a message about
"gnome settings daemon not running ..."
My menues contain just one application even though I installed just about
everything.
Logging out is not possible, xscreensaver doesn't react.
A long the way I must have m
> And here is another question. What version of LFS are you running?
6.0
dependencies are installed. configure gives no problems.
Olaf
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Thanks,
the hint with LC_ALL="en_US" helped.
the make output of compiling evolution is below.
make[3]: Leaving directory `/usr/src/evolution-2.2.2/views/calendar'
make[3]: Entering directory `/usr/src/evolution-2.2.2/views'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/us
hi
I have problems compiling evolution. I am using blfs from the cvs version of
the book.
this is my error:
make[1]: Entering directory `/usr/src/evolution-2.2.2/tools'
make install-am
make[2]: Entering directory `/usr/src/evolution-2.2.2/tools'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -DG_LOG_DOM
Can somebody help me with pango?
this is my error message:
Writing a pango.modules file to use when running examples before installing
Pango.
/usr/src/pango-1.8.1/pango/.libs/lt-pango-querymodules: error while loading
shared libraries: libXft.so.2: cannot open shared object file: No such file or
> >
> >Goodness, a similar bug was around in gpm-1.19.x series too and I
> >thought I had even offered a patch that would fix a "no texinfo" problem.
> >
> >Maybe I'll take a look and do another one. In fact, maybe I'll even
> >offer to help Nico with QA before he does another release. These sim
On Sun, 13 Mar 2005 06:04:42 +0100
Daniel Klagges <[EMAIL PROTECTED]> wrote:
> Hi!
>
> I have just installed Gnome 2.8 with the newest blfs svn. It seems, that
> my gnome has no jpeg support. It is not possible to choose an jpeg
> background image, apps like gthumb and gimp can't open jpeg files.
my error:
gcc -L/usr/src/gpm-1.20.1/src -o prog/gpm-root prog/gpm-root.o lib/libgpm.a
rm prog/hltest.o prog/mev.o prog/disable-paste.o prog/mouse-test.o
make[1]: Leaving directory `/usr/src/gpm-1.20.1/src'
make[1]: Entering directory `/usr/src/gpm-1.20.1/doc'
/bin/sed -f /usr/src/gpm-1.20.1/doc
60 matches
Mail list logo
