Use a board and hold it straight and level from the top of the hill, then at
the end of the board measure straight down to the ground.
for every 12 inches in length, a 27 percent grade will drop 3.24 inches.
for every 12 inches in length, the drop will be 1.8 inches for a 15 percent
grade.
I would
Whenever we buy any kind of paint or finish, I ask what is needed to clean
the brushes. Most of the time they say mineral spirits, or warm soapy
water. I prefer just using paint thinner.
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/a
Max, I believe it will say on the can what's best for clean up.
- Original Message -
From: "Max Robinson" <[EMAIL PROTECTED]>
To:
Sent: Saturday, April 28, 2007 9:45 PM
Subject: Re: [BlindHandyMan] Cleaning Paint brushes.
> The can of stuff is out the shop so I'll have to get it and see
What a strange choice of words for faucet.
- Original Message -
From: "David Ferrin" <[EMAIL PROTECTED]>
To:
Sent: Saturday, April 28, 2007 6:55 AM
Subject: Re: [BlindHandyMan] Kitchen Counter Top Renovations
>I believe it's what those folks down under call a faucet. I asked him that
>
It would probably be pretty difficult to get a board the whole length of the
hill, so I would
suggest using a string. Of course, you would want to keep the string as close
to level as possible.
Contact me at:
Donnie Parrett
1956 Asa Flat Road
Annville, KY 40402
Home # 606-364-3321
Cell # 606
They provide strips of clear dymo tape that you have to cut apart and have
someone place over the buttons. Not what I expected but it gets the job
done.
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
On Behalf Of Brice Mijares
Sent: Saturday, April 28, 2
Thanks I'll give this a try.
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
On Behalf Of Donnie Parrett
Sent: Sunday, April 29, 2007 11:17 AM
To: blindhandyman@yahoogroups.com
Subject: RE: [BlindHandyMan] figuring out how steep a slope of a hill is.
It would probably be
My idea is very similar to others. Using a board of a known length, put a
level on it, with of course one on the ground. Measure the distance to the
ground from the end in the air. Make sure the measurement is taken from the
side touching the ground and not the top of the board. Divide the m
I have signed up for woodworking for the blind and now have my first issue.
I have finished reading the January edition of woodworking magazine and it's
very good. I was especially interested in a report on the saw stop saw.
For those who haven't signed on yet the saw stops in about 2 tents of
Where can you get the robotic lawn moor, what is the price and how many inches
is the cut? Thanks suggestions appreciated. I really enjoy this list
immensely. Everyone take care and stay safe. Barbara
[EMAIL PROTECTED]
[Non-text portions of this message have been removed]
To listen to th
Wet wood will cause a change in conduction and will be picked by the safety
mechanism and lock the blade. For that reason, before using wet wood, the
machine sensor has to be turned off.
--
Larry Martin
Woodworking for the Blind
--joining the world of blind wood workers
-- Orig
Turn the house over and use a floor sander.
Geoff
- Original Message -
From: Betsy Whitney, Dolphin Press
To: blindhandyman@yahoogroups.com
Sent: Tuesday, April 24, 2007 9:06 PM
Subject: Re: [BlindHandyMan] hitting the ceiling
We have the same junk on our ceiling. Since our home is 26
Hi Kevin,
My brewing system has evolved over the years. I started by boiling
water and malt extract in the kitchen to brewing outside. I don't see
much of the kitchen any more because of boil overs. But I purchased a
big gas stove and I am now boiling over out side! Actually, it is not
that b
13 matches
Mail list logo
