Hi All, My wife just noticed some light surface rust spots on my table saw.
There is an overhead cold water pipe. For a few weeks I didn't have the saw
covered and condensation caused the drops to fall on the saw.
I wonder what is the best way to remove. She noticed it when I was getting
ready t
Try oven cleaner. That is what use to do it for me.
RJ
- Original Message -
From: Lenny McHugh
To: Handyman-Blind
Sent: Sunday, October 28, 2007 5:12 PM
Subject: [BlindHandyMan] surface rust
Hi All, My wife just noticed some light surface rust spots on my table saw.
There
Hugh
To: Handyman-Blind
Sent: Sunday, October 28, 2007 5:12 PM
Subject: [BlindHandyMan] surface rust
Hi All, My wife just noticed some light surface rust spots on my table saw.
There is an overhead cold water pipe. For a few weeks I didn't have the saw
covered and condensation ca
hi lenny i just put a 400 grit piece of sand paper on the palm sander
and tuch it up or just do the whole thing.
it doesn't take verry long.
then wax with paist wax.
but first get some of that foam pipe covering and cover that pipe so
this does not happen again.
also don't let anyone set a pop o
Well, I finally got it all cleaned up. A friend gave me an auto product to try.
It was called no-dull and is for cleaning aluminum wheels. It is like cotton
with a chemical added. This cleaned all but a few spots and some find sanding
pad with mineral spirits cleaned up the rest. After I gave a
