groups.com]
> On Behalf Of Scott Howell
> Sent: Wednesday, June 03, 2009 5:01 AM
> To: blindhandyman@yahoogroups.com
> Subject: Re: [BlindHandyMan] any joiners about
>
>
>
>
>
>
>
>
> Well now I think you've made such a compelling argument, I just might
>
And they know how to make the sharpest tools too. Must come from all those
Samurai warriors making those great swords.
- Original Message -
From: Dan Rossi
To: blindhandyman@yahoogroups.com
Sent: Wednesday, June 03, 2009 9:46 AM
Subject: Re: [BlindHandyMan] any joiners about
I got better results pulling, and didn't care if I was thought a
neandrethal. It just worked better for me to pull the push plane. I am no
cabinetry man, but the results were approved by all regardless if they
knew the worker or not.
On Wed, 3 Jun 2009, Scott Howell wrote:
> Well you know
I've sometimes just use plains backwards, on the pull,
even though it makes holding them hard. You have much better controll.
I agree about scrapers, they cut, sand paper grinds and leaves junk in the
pours of the wood. All good violin makers finish with scrapers wherever
possible.
Tom Fowle
Power is not the key for cutting straight and accurately. Having a properly
sharpened tool is the key. Bob is absolutely correct
about these saws. The cuts are smooth and quickly done. I don't own a
Japanese plane; but, have used one. I was very impressed
with the results I achieved.
When f
Hmm, pulling the spirits toward you. And I would have thought it was
because someone got annoyed when they bent a saw trying to power through
the push, and realized that putting the blade in tension made more sense
than putting it in compression. *GRIN*
I would think that you could get a bit
Jo Taliaferro
empowering people to live with their choices
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Scott Howell
Sent: Wednesday, June 03, 2009 5:01 AM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] any joiners about
W
Japanese pull plains exist and are able to allow for controlled, fine shavings.
RD
[Non-text portions of this message have been removed]
in less than 5
> seconds and you can hardly feel where the cut was made.
> - Original Message -
> From: Scott Howell
> To: blindhandyman@yahoogroups.com
> Sent: Tuesday, June 02, 2009 8:23 PM
> Subject: Re: [BlindHandyMan] any joiners about
>
> You know I've
Well you know I bet it would be a bit easier to run a plane toward
then away as well. Spirits or no spirits, they have something with
this pull idea.
On Tue, 02 Jun 2009 20:23:19 -0400you write:
>
>You know I've read this thread with some interest. It seems to me that
>it would be more natural to cut on the pull stroke instead of the push
>stroke. I hadn't thought much about it until reading this thread, but
>seems you would have a little
less than 5
seconds and you can hardly feel where the cut was made.
- Original Message -
From: Scott Howell
To: blindhandyman@yahoogroups.com
Sent: Tuesday, June 02, 2009 8:23 PM
Subject: Re: [BlindHandyMan] any joiners about
You know I've read this thread with some intere
I think you'll find that good saws have always cut on the pull stroke. Pull is
accurate and power. I had one a long time ago and got a cheap sharpen job and
the guy sharpened it to cut on the push stroke. Talk about a good saw going
south.
...bob
[Non-text portions of this message ha
l Message -
> From: Spiro
> To: blindhandyman@yahoogroups.com
> Sent: Tuesday, June 02, 2009 3:09 PM
> Subject: Re: [BlindHandyMan] any joiners about
>
> these sound like an improvement.
> Where does one acquire them?
>
> On Mon, 1 Jun 2009, Tom Fowle wrote:
>
> >
Try Japanwoodworker.com
- Original Message -
From: Spiro
To: blindhandyman@yahoogroups.com
Sent: Tuesday, June 02, 2009 3:09 PM
Subject: Re: [BlindHandyMan] any joiners about
these sound like an improvement.
Where does one acquire them?
On Mon, 1 Jun 2009, Tom Fowle wrote:
>
these sound like an improvement.
Where does one acquire them?
On Mon, 1 Jun 2009, Tom Fowle wrote:
> I have two "japanese" style hand saws,
> one is a "back saw" for I assume doing accurate joinery type cuts and the
> other
> is a double edged rip and cross cut saw.
> They are very thin and
I have two "japanese" style hand saws,
one is a "back saw" for I assume doing accurate joinery type cuts and the other
is a double edged rip and cross cut saw.
They are very thin and flexible, and the handles are long wooden ovals that
extend maybe 8 or 10 inches beyond the "pull" end of the saw.
Y
I find the saws that cut on the pull stroke much easier to control
(personally). I can cut much more accurately it seems. By
pulling toward my body, I can keep the saw in the plane of the cut much easier.
Terry
On Sun, 31 May 2009 09:01:59 -0400you write:
>
>I have two Japanese style pull saws
I have two Japanese style pull saws. One is a flush trim saw, the sort you
would use for trimming dowels off flush to a surface, the other is a
stiffened back style. The teeth are very small and sharp. It takes a bit of
getting used to, starting the saw on the push stroke. The really nice thi
There are several Japanese saws on the market. All Japanese saws work on
the pull stroke.
It depends on what you need a saw to do.
I have a saw for cutting plugs or thin strips of wood. The kerf is so thin
they recommend using it for cutting the line in a guitar neck to lay the
fret wires
20 matches
Mail list logo