ith the latter it'll work with the former.
Rick
On Tue, Oct 16, 2018 at 6:25 PM 牛晨辉 wrote:
Dear All,
Is someone familiar with adc2x550-12 ?
Is there a yellow block of this kind of ADC for ROACH2 or SNAP platform?
Thanks!
Peter Niu
-原始邮件-
发件人:"吴锋泉"
发送时间:2018-10-17 07:52
Dear All,
Is someone familiar with adc2x550-12 ?
Is there a yellow block of this kind of ADC for ROACH2 or SNAP platform?
Thanks!
Peter Niu
--
You received this message because you are subscribed to the Google Groups
"casper@lists.berkeley.edu" group.
To unsubscribe from this grou
Hi, David,
We are facing a sync problem.We deployed 8 ROACH2s in our system now.Taught as
the PAPER model ,I connect a 1pps in the sync_in port of pf1,and put signal out
from sync_out of pf1 into the sync_in of pf2,and so on. When I run the
paper_init.rb to initial all the 8 ROACHes,However The
-3.htm
(Can’t link directly to a sample product but be sure to select a base or main
frame, and add the CMOS distribution amplifier “Internal Option”.
Good luck.
Jonathan
On Jan 29, 2015, at 9:00 PM, Peter Niu peterniu...@163.com wrote:
Hi, David,
We are facing a sync problem.We deployed
Hi, All,
In our model, We need ADC clock frequency up to 250Mhz. Our ADC boards are
ADC16*250-8.We are using adc16*250-8 yellow block in our model modified based
PAPER model .However when I changed the XSG core config/User IP Clock
Rate(MHz) to 250 Mhz and System Generator/FPGA Clock
Hi ,Dave
Though I am quite a new hand in the uImage system ,I did suspect the uImage
could cause this problem.Do you remember one of my roach in netboot doesn't
work normally I mentioned previously?It works fine with the soloboot.
Interestingly,one of my roach works fine with netboot
6 matches
Mail list logo