Hi,
BR2, phone1-3001 and phone2-3002 and HQ phone1-1001 and phone2-1002.
When the BR2 is in SRST mode, can I call BR2 from HQ with normal 4 digit
number [3001] or 10 digit pstn numbers to reach BR2.
Normal user from HQ will dial only the 4 digit number to reach BR2 [3001,
3002
In that section we are instructed to configure CME in Branch 2. In the
same section, we are also instructed to configure paging for branch 1-
which is off of the CM cluster. I looked at the solution provided in
the manual, and it has different IP Addressing, different number
extensions (5 digits
Hi!
I think you cant reach "simply" the unregistrered branch phones
(registered to SRST routers) with 4 digit dialing. This is solved in
later CM versions (like 4.2) with adding phone parameter "call forward
not registered". In Cm 4.1 you may use a translation pattern (with
partition).
Zsolt
_
I'll point you to CertTalk where somebody else pointed this out- but your
query is justified.
http://www.certificationtalk.com:81/showflat.php?Cat//Board/voice4twentyseve
n/Number/29433/page/0/view/collapsed/sb/5/o//fpart/1
Vik Malhi
CCIE Voice Instructor / Developer - IPexpert, Inc.
CCIE Voic
Gents,
I have a strange setup. I am establishing an IPIPGW the CME to te IPIPGW
is SIP and CCM to IPIPGW h323.
The call origianted from the CCM Succeed. The call from CME rings the phone
but when i answer it still rings
on the other phone nd then dropped.
Any body has any clues pls find below the
i keep having this pesky little problem with CUE and i believe it has to do
with transcoding. Most times it works and sometimes it just doesn't. Case in
point tonite i couldn't get calls from CCM to CUE, even pasted same config
that worked the last time and it just wouldn't work. Stripped transcode