Hi,
Anyone out there has successfully configured PSTN switch using Cisco
1760 (VWIC-2MFT-T1, VWIC2-1MFT-T1/E1)?
I would like to convert IPexpert PSTN + WAN config and port PSTN and GK to 1760.
I have another router running as FR function.
Thanks.
The ESW doesn't support auto-negotiation of dot1Q on the ATA (access
mode with voice vlan). Try configuring as a trunk.
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
From: [EMAIL PROTECTED]
FYI
Script editor has very good content-specific help. If you're not using
it, you should be. If you don't know what a step does, just drag it
from the list on the left to your script on the right, then right-click,
properties and use the help button there in the lower right. It's
better than
My problem was the url for the phone agent
- Original Message
From: Jonathan Charles [EMAIL PROTECTED]
To: Edward French [EMAIL PROTECTED]
Cc: CCIE Voice ccie_voice@onlinestudylist.com
Sent: Sunday, April 20, 2008 10:45:43 AM
Subject: Re: [OSL | CCIE_Voice] UniverCD is toast...
Well,
Vik,
Don't you need an IPIPGW on the CME router if you are using SIP inbound to
the CME?
On Wed, Apr 16, 2008 at 7:16 PM, Vik Malhi [EMAIL PROTECTED] wrote:
SIP trunk to CME is a possibility. As is H323 gateway. As is gk
integration.
For SIP...on the CCM side you have a SIP trunk, on the
It was explained to me that SIP to SIP transcoding wasn't supported, but
I think it's transcoding with SIP period. For instance, I haven't been
able to get G.729 to work with SIP to PSTN either, with hardware
transcoders on both ends. If you're calling an IP phone across the WAN
via G.729 SIP
...while on the subject of IP Phone Service URLs, don't forget the bug.
If you have IPMA or EM in conjunction with IPPCX, and your IPMA or EM
stops working (e.g. Host Not Found), then you've encountered
CSCsc41273.
BSymptom:/B
Attempting to access the configured Extension Mobility service
FYI
A handy debug for troubleshooting transcoding and DTMF relay with SIP is
debug ccsip messages. Look in the SDP section of the invite for the
DTMF and codec negotiation.
HQ#debug ccsip messages
Sent:
INVITE sip:[EMAIL PROTECTED]:5060 SIP/2.0
Via: SIP/2.0/UDP
My lab CUE doesn't have restore factory defaults. I'm guessing it's
prior to 2.0.1. Does anyone know what version of CUE is on the lab?
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
Hi,
When we configure the Directory for CRS setup. Do we insert the IP address
for the Publisher only, or both the Publisher and the Subscriber?
Entry: LDAP server host name, IP address, or AD domain
Thanks,
H. for Voice
-
Be a
I'm fairly sure it is in 2. Might be wrong.. .but... make sure you put the
module offline first. the command does not show up till it is offline.
On Sun, Apr 20, 2008 at 12:27 PM, Gregory Jost (grjost) [EMAIL PROTECTED]
wrote:
My lab CUE doesn't have restore factory defaults. I'm guessing
Both separated by commas.
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ashraf
Hannoush
Sent: Sunday, April 20, 2008 3:03 PM
To:
Thanks Frog for the update.
your name convention is a bit strange though:)
1st example
block2003 is actually to block 2002 from translation profile reject /^2002/
in your 2nd example.
you are blocking 3001 by placing 3001 in a partition let-it-go
block css does not have partition let-it-go,
did i get it right?
yeah
i also noticed that your css and partition have the same name, it is
recommended approach?
KISS***
Sara
*FrogOnDSCP46EF [EMAIL PROTECTED]* wrote:
14 matches
Mail list logo
