Hi Mark,
The other ports I have available on my Pod get registered, so TFTP and CCM are
all correct and working in my DHCP scope.
I also configure the ports in the same command line on my 6500.
I have reset the module twice as the CCM service.
I checked the port´s mac-address also.
I do
Silvio,
Did you try resetting the ports and/or modules?
Did you check to make sure the tftp services are running on CCM?
Common issues I have when working on my home lab.
More details wouldn't hurt either...
-T. Ferguson
>
>
>
> From: [EMAIL PROTECTED] [mailto:
Hi everyone,
I am in the middle of a session, and I am having problem to register a port 4/7
in CCM.
I have done it several times this week without a problem.
Has anyone faced this problem on that Pod ?
Proctorlabs´s Support advise me to post it on OSL, so I can get it fixed before
my sess
As far as I know, there is not a way to do this in CallManager. However,
you do have an option of auto-line this applies to the ability to
pickup an incoming call
Dave
_
From: Ante Boras [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 10, 2008 8:18 AM
To: dschulz
Cc: ccie_voi
3.3
2008/7/10 Steven Quek <[EMAIL PROTECTED]>:
> Hi,
>
> May I know for the CCIE Voice Lab which SRND version is used?
>
> Cheers
>
> --
>
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Date: Thu, 10 Jul 2008 08:20:11 -0400
> CC: ccie_voice@onlinestudylist.com
>
>
Hi,
May I know for the CCIE Voice Lab which SRND version is used?
Cheers
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Thu, 10 Jul 2008 08:20:11 -0400CC:
[EMAIL PROTECTED]: Re: [OSL | CCIE_Voice] 0 Conf max sessionsThank you Mike.
On Jul 9, 2008, at 11:29 PM, Mike Stevenson wrote:
As was me
Thank you Mike.
On Jul 9, 2008, at 11:29 PM, Mike Stevenson wrote:
As was mentioned..
a PVDM2-16 contains 1 DSP, when a DSP is configured as a Conference
Bridge, the rtr loads the required firmware into the DSP. A DSP
that has been configured as a Conference Bridge, cannot also be used
And what is the way to do this in Callmanager?
Ante
"dschulz" <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
09.07.2008 16:39
To
"'Ante Boras'" <[EMAIL PROTECTED]>,
cc
Subject
Re: [OSL | CCIE_Voice] Default line
The command to do this is "auto-line". Use it under the ephone for the
