Also do try putting in the ip pim sparse mode when you enable the Multicasting
On Thu, Jun 11, 2009 at 7:30 AM, Michael
Ciarfellomciarfe...@iplogic.com wrote:
Hi and welcome.
Did you upload the MOH file to all the other servers in the cluster?
Multicast routing enabled on the remote
Hi,
I've done the new IPEXPERT volume 6 workbook labs 1 and 2. I am having
problems with my CIPC running SIP mode. In the workbook I needed to convert
it from a SCCP to a SIP phone via phone templates. I've done that and since
then I cannot use the CIPC anymore.
For example if I configure the
I'm forwarding this up the chain to see what can be done.
Currently we are announcing updates n the blog, twitter and on the lists.
You can subscribe for RSS feeds from the blog - this is what a lot of folks
do.
Thanks
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL:
Hi,
While configuring the sip dial rule for interdigit timeout, it doesn't work for
me.
I used BAT to update the sip dial rule and went back to the device
configuration, sip dial rule still showed none. When I checked Job Schedule log
it showed dial rule = . If I applied the new sip dial
You're already in luck! We do have this sort of alerting system
already setup!
Subscribe to this RSS feed for updates on Voice products:
feed://ipexpert.ccieblog.com/category/product-updates/voice-product-updates/feed/
or
Hello,
Its long time but i have atlast made it.
I was going through with all the discussion but i feel Mark Rocky was
absolutely correct.
In other words, if we will consider CCIE written we use pass4sure or AT or
TK to pass the exam.
In my 11 years of carrier i have not seen a single guy who
Oh - man - I needed a laugh this afternoon and I have to thank you for
it
So Johnny, if you are so proud of this why don't you post your number?
And for that matter use your real name?
Most people that STUDY, KNOW AND UNDERSTAND the technologies will pass in
2-3 attempts.
I would have to
On Thu, Jun 11, 2009 at 3:25 PM, john smith johnccie1...@gmail.com wrote:
Hello,
Its long time but i have atlast made it.
I was going through with all the discussion but i feel Mark Rocky was
absolutely correct.
In other words, if we will consider CCIE written we use pass4sure or AT or
Hey gang,
I am in the middle of a proctor labs session and have run into a bit
of a pickle and need some help. I am using EzVPN with a 2611XM and it
appears that everything is working just fine with that. My crypto
session is up-active, I am able to ping the Pub and Sub from my 2611
Amp - please take a look at the after hours support options in your proctor
labs web page and send an email to support.
They are normally pretty quick to respond.
Thanks
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Thu, Jun 11, 2009
We need to call an exterminator. These people are coming out of the woodwork
like cockroaches!!!
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Larry Hadrava
[lar...@ipexpert.com]
Sent: Thursday, June 11,
Can you ping the pub from your computer? Try manually browsing to
http://10.10.210.10
--
Vik Malhi CCIE #13890, CCSI #31584
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join our free online support and peer group
FYI, the problem is resolved. It was a DHCP pool conflict. I'm rocking
and rolling now. Big thanks to James Key!!!
Amp
Quoting Vik Malhi vma...@ipexpert.com:
Can you ping the pub from your computer? Try manually browsing to
http://10.10.210.10
--
Vik Malhi CCIE #13890, CCSI #31584
Senior
Hi all;
Cannot Cisco take any legal action toward these companies and provide a fair
base for everyone!!!...I think it is not fair at all that these guys have the
exam before they enter it...we are doing our best to pass the exam...you may
fall twice or more to pass it and these guys my get
Ahmed
I wouldn't worry about them passing. Whatever stuff they are getting
can't replace real knowledge and expertise. Basically those guys are
selling people's brain dumps and passing it off as real labs. Even with
a pile of brain dumps an unskilled person still isn't going to pass the
lab.
And they clog up the seats for the rest of us thinking they can pass. That's
why I condone a three step process. Written, OK from a Cisco SE, etc then the
LAB. They may also think that the CCIE is the golden ticket that allows them
into the chocolate factory. None of them probably think
I think I'm on to something but it's late to fully test. Will resume tomorrow.
Presence groups don't seem to do anything to CUPC--only on the phones
themselves. Remember there is a difference between seeing presence status for
a BLF/SD and the X directories presence status (corporate, missed,
Did you resolve this? I get the same thing on an 7940/60 with SIP 8-8-0. Any
service including corporate directory gives the error.
A 70, 41, etc works.
The kind of interesting thing is the 7940/60 end-user phone guide doesn't say
Services and Services Button works for SIP, but Corporate
18 matches
Mail list logo
