Re: [OSL | CCIE_Voice] PSTN Router issues

True, and I seem to rememeber hearing it on the old Version 2 VOD. Can't wait until the new videos arrive and can get started on them. On Fri, Aug 28, 2009 at 8:11 AM, Aamir Panjwani < aamir.panjw...@ivision.com.au> wrote: > I don’t think it’s a bug…. just a weird PRI behavior with MGCP and > s

Re: [OSL | CCIE_Voice] PSTN Router issues

I don't think it's a bug just a weird PRI behavior with MGCP and something we must know how to get it working in the exam pretty quickly From: Bill Hatcher [mailto:wchatc...@gmail.com] Sent: Friday, 28 August 2009 3:07 PM To: Aamir Panjwani Cc: ccievoice Subject: Re: [OSL | CCIE_Voic

Re: [OSL | CCIE_Voice] PSTN Router issues

That worked. All is working now. Is that a know bug? On Fri, Aug 28, 2009 at 7:31 AM, Aamir Panjwani < aamir.panjw...@ivision.com.au> wrote: > Have you configured br1 or br2 pri for mgcp? If yes, then remove layer 3 > binding and re-add it, if that doesn’t work post relevant bits of your PSTN

Re: [OSL | CCIE_Voice] PSTN Router issues

Have you configured br1 or br2 pri for mgcp? If yes, then remove layer 3 binding and re-add it, if that doesn't work post relevant bits of your PSTN and BR1 config From: Bill Hatcher [mailto:wchatc...@gmail.com] Sent: Friday, 28 August 2009 2:29 PM To: Aamir Panjwani Cc: ccievoice Subject: Re:

Re: [OSL | CCIE_Voice] PSTN Router issues

I do. The two links that are not working are the BR1, and BR2 links. The HQ link works fine, and I have another E1 link going to a CCM 4.3.1 environment as well that works fine. On Fri, Aug 28, 2009 at 7:17 AM, Aamir Panjwani < aamir.panjw...@ivision.com.au> wrote: > Make sure you have this co

Re: [OSL | CCIE_Voice] PSTN Router issues

Make sure you have this command under PSTN PRI d-channel "isdn protocol-emulate network" From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Hatcher Sent: Friday, 28 August 2009 2:12 PM To: ccievoice Subject: [OSL | CCIE_Voice] PSTN Ro

[OSL | CCIE_Voice] PSTN Router issues

I keep getting the following error on one of my T-1's and one of my E-1's. ISDN Se0/2/1:23 Q931: Ux_DLRelInd: DL_REL_IND received from L2 I have found several forums where other people had had this issue, but have not found a resolution. Has anyone else seen this before? When I do a show isdn s

Re: [OSL | CCIE_Voice] Registration Rejected by Subscriber

The issue is encounter when auto reg is set or not. I have also just experienced it with the sub out of the ccm group, but with the sub as primary tftp server. In this condition the sub is trying to reach the pub by hostname. However the server name was changed to an ip address. I belie

Re: [OSL | CCIE_Voice] ipexpert website down

Guys - we're aware and working on it. Thanks! Regards, Wayne A. Lawson II - CCIE #5244 Founder & President - IPexpert, Inc. Mailto: wlaw...@ipexpert.com Mobile: +1.810.334.1564 :: Message sent from iPhone. On Aug 27, 2009, at 8:55 PM, "Aamir Panjwani" wrote: > ipexpert website is down at the

[OSL | CCIE_Voice] ipexpert website down

ipexpert website is down at the moment, I can't get to home page or members area. Blog page is working fine though. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit

Re: [OSL | CCIE_Voice] 3750 QoS Question

James, In the example you're looking at is there a mls qos map policed-dscp X to X line? I believe that defines the mark-down to CS1 (or otherwise) when policed-dscp-transmit is used in an exceed action. Thanks. I just learned something new :) -jeff

Re: [OSL | CCIE_Voice] 3750 QoS Question

James, I started to respond to this yesterday and realized I was going down the wrong path. I did run into this article which I have not had a chance to digest yet: http://www.networkworld.com/community/node/42427 It seems that they may be talking about the same exact example you're talking ab

Re: [OSL | CCIE_Voice] Registration Rejected by Subscriber

I had the same issue yesterday while I was doing this in my home lab. The only difference I had the DHCP addresses being done by the HQ router once a phone gets its IP and TFTP info it would reg then reject. I then shut down the sub and the reg worked with the Pub as well. protorlab scheduled for S

Re: [OSL | CCIE_Voice] Registration Rejected by Subscriber

Is auto reg enabled on sub ? -- Sent using BlackBerry From: ccie_voice-boun...@onlinestudylist.com To: ccie_voice@onlinestudylist.com Sent: Thu Aug 27 11:09:52 2009 Subject: [OSL | CCIE_Voice] Registration Rejected by Subscriber I have crea

Re: [OSL | CCIE_Voice] Hardware phones with EZVPN

I think what I am going to do to solve this whole problem (assuming that each person's problem is in fact related to the NAT'ing of SCCP packets) is this: I am going to enable something called NEM or Network Extension Mode for our EzVPN server. This will disable your router's need to NAT/PAT

[OSL | CCIE_Voice] Registration Rejected by Subscriber

I have created VM images for both the sub and pub, but the sub is giving me a registration rejected whenever it is part of the callmanager group. If I remove it from the group, reset its ccm service or shut it down the phones register with the pub just fine. If the dhcp scope is set to sub

Re: [OSL | CCIE_Voice] 3750 QoS Question

Anyone have any guidance on the questions below I posted yesterday? -James From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of James Key Sent: Wednesday, August 26, 2009 2:09 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice]

Re: [OSL | CCIE_Voice] Simulating SIP trunk in home lab

Any Cisco router that supports SIP dial peers. Jonathan On Thu, Aug 27, 2009 at 10:06 AM, Padmanabhan, Padhu wrote: >  Looks like my post didn't make it through...so posting again. > > > > Thanks,Padhu > > - Original Message - > > From: Padhu > > To: OSL Group > > Sent: Wednesday, August

Re: [OSL | CCIE_Voice] Anyone using IPBLUE phones only for the home lab ?

Unfortunately no. In fact the XLite SIP softphone can't do hardly anything that a hardware SIP phone can do (softkeys, etc). BTW - eBay typically has 7961's available for roughly 150USD. All you need is 3 of those and 2 7960's for our labs. -- Mark Snow CCIE #14073 (Voice, Security) Senior

Re: [OSL | CCIE_Voice] Hardware phones with EZVPN

Let me dig around and try to find it - it was in an old email of mine. -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.com -- Join our free online support and peer group communities

Re: [OSL | CCIE_Voice] Vol2 Lab3 Inital Configs

Phil, There should be a file in your "My Configs" section of ipexpert.com account labeled "CCIE Security v5.0 Volume 2 (CCIE v3 Blueprint) Configs and Diagrams". Here: https://www.ipexpert.com/index.cfm/MyConfigs If you do not have this file in your account, please email supp...@ipexpert.com

[OSL | CCIE_Voice] Simulating SIP trunk in home lab

Looks like my post didn't make it through...so posting again. Thanks,Padhu - Original Message - From: Padhu To: OSL Group Sent: Wednesday, August 19, 2009 6:19 PM Subject: Simulating SIP trunk in home lab I currently have

Re: [OSL | CCIE_Voice] Vol2 Lab3 Inital Configs

Just for clarification: I am not using proctorlabs, i want to load the configs in my home lab. So normaly i take the configs of the MY CONFIGS-section. Steve Sarrick wrote: > They are still working on these. I know Mark was trying to fix the > images. I think you can get close with the One W

Re: [OSL | CCIE_Voice] Vol2 Lab3 Inital Configs

They are still working on these. I know Mark was trying to fix the images. I think you can get close with the One Week Lab experience, but check with support. -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Phil

Re: [OSL | CCIE_Voice] Hardware phones with EZVPN

Mark, Do you have the bugID or know what versions are fixed? Craig Staffin On Thu, Aug 27, 2009 at 8:48 AM, Mark Snow wrote: > Yeah - it's specifically a NAT'ing of SCCP pactkets - bug that has been > identified. > > -- > Mark Snow > CCIE #14073 (Voice, Security) > > Senior Technical Instruc

Re: [OSL | CCIE_Voice] Hardware phones with EZVPN

Yeah - it's specifically a NAT'ing of SCCP pactkets - bug that has been identified. -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: ms...@ipexpert.com -- Join our free online support and peer group

Re: [OSL | CCIE_Voice] Hardware phones with EZVPN

I actually had the exact same issue. I am using a 861 with 12.4.22T It was strange as soon as a SCCP answered a call it would say CM down. But the phone itself registered fine and appeared to work fine until you answered a call. The odd part is that it did it to CME and CUCM. It also did NOT a

[OSL | CCIE_Voice] Vol2 Lab3 Inital Configs

Hello! Are there any initial configs for the VOL 2 Labs released? I am working on Vol2/Lab3 and have loaded the PSTN-RTR-config of Vol1 Lab13, but this is obviously not the right one. regards, Philipp ___ For more information regarding industry leadin