Hi,
I set up CUE AA and want to use dial by name feature. problem is it allow
access to all users .
What if I want to exclude people like managers from directory ?
Any idea ?
Jeremy
___
For more information regarding industry leading CCIE Lab
Make sure your software conference bridge is registered...if not go to
IPVMS service parameter and turn it on
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of J Hogan
Sent: Saturday, 29 August 2009 3:51 PM
To:
Hogan,
As Aamir said make sure your software conf bridge is registered, also you need
to initiate the meetme conference by pressing the meetme softkey and dialling
the number, once the meetme conference is up than you will be able to join the
conf by dialing the meetme number from other phones.
Team
Thanks my software cfb is registered. But still no dice
Sent from my iPhone
On Aug 29, 2009, at 5:26 AM, Kumar, Narinder narinder.ku...@uxcg.com.au
wrote:
Hogan,
As Aamir said make sure your software conf bridge is registered,
also you need to initiate the meetme conference by
Hello Everyone again :-)
I have the CFB_2 registered. the IPVMS is activated, the CSS for the
Meet-me is set to none. the media group on the phone has the group assigned
to it that the CFB_2 belongs to.
I hit new call -- meetme then I dial 2000. the pattern I have is 20[0-5]0
and I also have
Nope.
In fact, I couldn't even replicate it.
Jonathan
On Thu, Aug 27, 2009 at 12:58 AM, Allen Suyenlins...@hotmail.com wrote:
Hi folks,
For the troubleshooting practice on workbook lab 1B, where DHCP is not
working b/c of the different flavor of CSA installed by UCM when we
installed
Hi
I should press MeetMe software button instead of NewCall when creating confrnce
--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.
22, Munis str., Mirabad District
Tashkent, 100080, Uzbekistan
Tel UZ: +998 71 2907364
Fax UZ: +998 71 2907356
Mob UZ:
If the regions for your phone and your CFB are set up so that the phone would
be calling the CFB using G729, the call will fail. Software CFB (the one that
runs on the CUCM) does not support G729 calls. The only codec it supports is
G711ulaw. You would either need to adjust the regions or
3.3 IP Phone customization (Part II)
Configure directory number 2103 on line 2 of HQ Phone 3. After configuring
line 2
extension, user is complaining that when calls are active on both the lines,
he/she
can not take both the calls in conference using “Join” softkey.
Can anyone answer for the
Hi Guys,
I know after this i will be banned or get unsubscribed
Well i just wanted to say we cannot give our 5 years to complete one CCIE
lab, So some people will like and some people won't
But i want to pass the lab fast as i am having very good experence on
projects and can handle projects
Good luck when it actually comes time to show you are a ccie, but then
again as you say you can handle projects more good then CCIEs. You may
want to try a grammar class prior to a lab.
Not much else to say on it, I'm sure you will find takers on your
sharing the expensive labsmost of us
Indeed you will be banned from OSL. I don't think you realize the
principle of an exam. It means that you study and if you have studied
enough and really are an expert you will pass.
I do like your idea of loving everyone. That's what the world needs
right now :-)
--
Rick Mur
CCIE2
OK, so I have an external phone number mask of +1212394
I call a phone at BR1 (6175552003) and it shows up as +1+12123945001...
This is because on the device pool I have +1 as a prefix for incoming
National...
How do I get around this?
Jonathan
If you have the requirement of sending the globalized number over the PSTN,
you have no need to re-globalize the number inbound by prefixing +1.
Otherwise use Calling Party Xformations to strip the + outbound and then
prefix + for incoming National at BR1.
On Sat, Aug 29, 2009 at 12:46 PM,
Do people passing the bar get these crackheads too…I can see it now…
Pass the bar, no need to study…go to www.lawyercracks.biz...
Why should you study all those hours when you’re only going to become legal
counsel at the county jail. Our products are near replicas of the real
thing….see
scab
excuse typos from my mobile device
-Original Message-
From: crackccielab crackccielab crackccie...@gmail.com
Sent: Saturday, August 29, 2009 1:36 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Crack CCIE Ver 3 lab
Hi Guys,
I know after this i will be banned or
Pretty sad if you have to cheat. :-\
On Sat, Aug 29, 2009 at 5:55 PM, GregW gwen...@yahoo.com wrote:
scab
excuse typos from my mobile device
--
From: crackccielab crackccielab crackccie...@gmail.com
Sent: Saturday, August 29, 2009 1:36 PM
To:
Hi All,
Do you know why it is recommended to put the incoming significant digits to ALL
instead of 4 in gatekeeper trunk configuration?
Thanks,
Shaaf
___
For more information regarding industry leading CCIE Lab training, please visit
Yes, because you do not know how many digits are coming.
It might seem like a good idea to say, 'hey, just set it to 4, then no
trans pattern needed to strip the tech prefix...'
Great idea... unless you have to support TEHO to HQ or BR1 from BR2
Jonathan
On Sat, Aug 29, 2009 at 10:11 PM,
Site the source of your question, (who's workbook, etc.) And we'll help you.
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of CCIE CCIE
[willbeccies...@gmail.com]
Sent: Saturday, August 29, 2009 12:32 PM
To:
There should only be one call on a port. UNLESS you are on your deskphone
talking to a customer and VPN'ed into that customer's network using IP
Communicator (PC connected to phone) to solve an issue on their system. Then
the policing policy (does that count as a repetitive redundancy?)
OK, so let's say I have to send 7 digits for local, 10 digits for LD
and stuff the + in for International...
What is stopping me from doing all of my calling party transformations
on the Route Pattern for that site?
Or are we using the calling party transformation patterns just in case
the above
When would you ever have two active streams to a phone?
I can't think of a set of circumstances that would have more than one
RTP stream hitting a phone.
Jonathan
On Thu, Aug 27, 2009 at 11:07 AM, James Keyj...@jackhenry.com wrote:
Anyone have any guidance on the questions below I posted
Section 3.3 of what, exactly?
Jonathan
On Sat, Aug 29, 2009 at 11:32 AM, CCIE CCIEwillbeccies...@gmail.com wrote:
3.3 IP Phone customization (Part II)
Configure directory number 2103 on line 2 of HQ Phone 3. After configuring
line 2
extension, user is complaining that when calls are
24 matches
Mail list logo
