Thanks for the suggestions!
Well after I did some intensive testing it is working as it should!
Met vriendelijke groet,
With kind regards,
ing. Iwan Hoogendoorn, CCIE3 #13084 (R&S, Sec, SP)
Homepage: http://www.i-1.nl
Blog: http://blog.i-1.nl
Twitter: http://www.twitter.com/iwan_ccie
LinkedIn:
Hi Mike,
While your logic seems air-tight, I just want to let you guys know that you
shouldn't count on the OEQ's giving you 21 points anymore. They've changed
it to 4 points only. At least for the Voice Lab. I can't vouch for the other
tracks. But! It is still mandatory pass this section to pass
The QoS SRND states that the "auto qos voip" command adds the following config
to the router:
C2970(config)# mls qos
C2970(config)# mls qos map cos-dscp 0 8 16 26 32 46 48 56
Earlier in the SRND, around page 40, it says that the old marking for audio
signaling was AF31 (26). That is the same D
No
I only change the Single button barge to CBarge
On Wed, Mar 17, 2010 at 9:49 PM, Radhesh Naik wrote:
> Is you built in bridge in phone configuration set to on by any chance ?
> even if its set to default try changing it to off.
>
>
>
> -Radhesh
>
>
>
> *From:* ccie_voice-boun...@onlinestud
Hi:
This is really a bad new...
Date: Thu, 18 Mar 2010 10:11:02 +0200
From: pauld.kru...@gmail.com
To: mthompson...@gmail.com
CC: ccie_voice@onlinestudylist.com; bcarr...@ipexpert.com; nra...@gmail.com;
tsc...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] [OSL | CCIE_RS] [OSL | CCIE_Secur
Pulling from the QoS SRND, the following configuration is only supposed to
allow the bandwidth for one voice call per switchport VLAN. Obviously, based
on the 128k, we're focused on G.711 calls (so my next question will not apply
to G.729).
I want to know if the following command would disable
Hi all,
Any one setup the question 5.3 of the lab 5A vol1 using IP comm 7.0.3
and IP blue 2.10 for globalization and localization.
Thank you
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I always wonder if the guyz that wrote the PG looks through all this
concens. not just for this question but for all
They should help us with some of this issues as some of us trust that all
that is on the PG is what is needed, though i check config guides atimes
On Thu, Mar 18, 2010 at 3:17 AM, B
S! We include 400 hours of REAL rack
> > time with our Blended Learning Solution!
> >
> > Mailto: mar...@ipexpert.com
> > Telephone: +1.810.326.1444
> > Fax: +1.810.454.0130
> > Web: http://www.ipexpert.com/
> >
> __
___
Hotmail: Trusted email with Microsoft?s powerful SPAM protection.
https://signup.live.com/signup.aspx?id=60969
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/
Damn good question!! My thought is that the call on hold will be
'termiated' at the call control and not to the phone.
So while a call is on hold, the bandwidth will be near 0 to the phone.
Sent from my phone, apologies for any typos.
On Mar 18, 2010, at 6:17 AM, "Berry, Matthew J." > wro
??? When did that change take place?and why?
Sent from my phone, apologies for any typos.
On Mar 18, 2010, at 4:11 AM, Paul Kruger wrote:
Hi Mike,
While your logic seems air-tight, I just want to let you guys know
that you shouldn't count on the OEQ's giving you 21 points anymore.
They'v
This has been a topic of conversation at work between a few of us, so
I'm interested in the feedback.
Sent from my phone, apologies for any typos.
On Mar 18, 2010, at 5:55 AM, "Berry, Matthew J." > wrote:
The QoS SRND states that the "auto qos voip" command adds the
following config to the
yes they changed to 4 points friend of mine done 2 weeks back and had same
input.
On Thu, Mar 18, 2010 at 4:53 PM, Mike Thompson wrote:
> ??? When did that change take place?and why?
>
> Sent from my phone, apologies for any typos.
>
> On Mar 18, 2010, at 4:11 AM, Paul Kruger wrote:
>
> Hi Mike
Hi,
I have a question for all who has passed CCIE Voice lab.
** So here is the question Live recording should work once the external
caller will call and once his call will get connected it should show
972123678 number. His calling number is 9721.*
*Now to configure or find the solution it
Hi,
I have a question for all who has passed CCIE Voice lab.
** So here is the question Live recording should work once the external
caller will call and once his call will get connected it should show
972123678 number. His calling number is 9721.*
*Now to configure or find the solution it
I think about two months ago.
I didn't see ANY announcements on it. I just saw it in my test. And thought
- cool! Only 4 points. What a bonus - there goes some pressure.
I stuffed up one of my four questions. And well... there was another one I
which didn't have a clue. So stuffing up that questi
Everone knew you had to pass OEQs regardless of the points. Which
world are you living in?
On 3/18/10, Paul Kruger wrote:
> I think about two months ago.
>
> I didn't see ANY announcements on it. I just saw it in my test. And thought
> - cool! Only 4 points. What a bonus - there goes some pressur
Hello,
Has this 4 point OEQ been effected
On Thu, Mar 18, 2010 at 12:23 PM, Mike Thompson wrote:
> ??? When did that change take place?and why?
>
>
> Sent from my phone, apologies for any typos.
>
> On Mar 18, 2010, at 4:11 AM, Paul Kruger wrote:
>
> Hi Mike,
>
> While your logic seems ai
; >> communities at <http://www.ipexpert.com/communities>
> >> www.ipexpert.com/communities and our public website at
> >> <http://www.ipexpert.com>www.ipexpert.com
> >>
> >> On Tue, Mar 16, 2010 at 9:45 PM, Marko Milivojevic <<
>
Hello Matthew, Mike,
The Cisco recommendation for marking signaling traffic has changed from dscp
26 to dscp 24 for call signalling in a production network, so I would do
that consistently over the network, however in the lab, you should do
exactly what they are asking you to, so should they ask y
Correct Mike,
The audio stream between phones is not maintained when the holder phone
press the hold softkey, in that moment an audio stream is sent from the
holdee moh server to the holdee itself, when the resume sofkey is pressed,
the audio stream is reestablished between the two original endpoi
Hi Naoufal,
Please stay away from cupc when testing globalization and localization, this
is not supported for this endpoint,
Thanks,
On Tue, Mar 16, 2010 at 9:37 PM, Kevin Damisch
wrote:
> What version of IP Blue are you using? A couple of weeks ago, I downloaded
> the new version of IP Blue a
Hi Sean,
Did you make sure the isdn outgoing ie redirecting-number command is present
in the voice serial interface?, how does the br1 debug isdn q931 look like?,
what is getting to the vm?, did you take a look at the rtmt for uc?
Thanks,
On Wed, Mar 17, 2010 at 9:07 AM, sean hurricane wrote:
>
>
>
> Hi,
>
> I have a question for all who has passed CCIE Voice lab.
>
> ** So here is the question Live recording should work once the external
> caller will call and once his call will get connected it should show
> 972123678 number. His calling number is 9721.*
>
> *Now to configure or fi
On Thu, Mar 18, 2010 at 11:23, Mike Thompson wrote:
> ??? When did that change take place?and why?
It changed starting January 4th, if I recall. The way one of the
proctors explained it to me, they thought the OEQs with 21 points
carried way too many points, compared to the rest of the lab. They
Hello,
is this information available online
On Thu, Mar 18, 2010 at 2:20 PM, Marko Milivojevic wrote:
> On Thu, Mar 18, 2010 at 11:23, Mike Thompson
> wrote:
> > ??? When did that change take place?and why?
>
> It changed starting January 4th, if I recall. The way one of the
> proctors explained
On Thu, Mar 18, 2010 at 13:25, Omotayo wrote:
> Hello,
> is this information available online
Not that I know of. Why does it matter, though? You still need to pass
both sections, nothing changes, really.
--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
YES! We include
unsubscribe
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hello,
Just think it wont hurt to have an idea of what is going on
Thanks for the info
Regards
On Thu, Mar 18, 2010 at 2:49 PM, Marko Milivojevic wrote:
> On Thu, Mar 18, 2010 at 13:25, Omotayo wrote:
> > Hello,
> > is this information available online
>
> Not that I know of. Why does it matter
Hi Guys,
My MWI is not working in SRST . what can be the probable reasons ..
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Anupam,
Can you please provide more detail? Take opportunities like this to thoroughly
explain what you do know, including config examples and outputs from show
statements. Your issues could be caused by any number of nuances.
Approach these scenarios as if you were already a CCIE. Provide d
Well said Tanner.
James Key
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Tanner Ezell
Sent: Thursday, March 18, 2010 12:27 AM
To: Kevin Damisch
Cc: ccie_voice@onlinestudylist.com; David Lee
Subject: Re: [OSL
Hello,
i set the in built bridge to On on the hq phone 2( phone that is barged
into). i get the Entance party tone and a message "you are not a valid
conference partipant"
i tried again i got the entrance party tone and message No Conference bridge
On Thu, Mar 18, 2010 at 11:02 AM, Omotayo wrot
Hello,
Am sure the conference resource on the br2 router is reachable because i
tested the Join Across Line feature on Br2 phone and the conference resource
was invoked
I do not know why the Barge is not working
BR2-RTR#sh sccp connections
sess_idconn_idstype mode codec ripaddr
Agreed!! Move along folks, nothing to see here. Moving on
Thanks,
Jim
On Mar 18, 2010, at 3:27 PM, James Key wrote:
> Well said Tanner.
>
>
> James Key
>
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-
> boun...@onlinestudylist.com] On Behalf
Anyone can point me to the best way to monitor unity connection ports?
I need to see info like dnis, rdnis and the like when a call comes in.
Is RTMT the right tool for this?
Thx!
___
For more information regarding industry leading CCIE Lab training,
Hi Jean,
Yes, the RTMT is definitely what you need.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M.
Thewissen
Sent: March-18-10 10:07 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no
38 matches
Mail list logo