Hey Gang,
Anyone out here planning on attending the upcoming boot camp in
Columbus with Amy?
Regards,
Amp
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I am scheduled for the one the end of November.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Amp
Sent: Thursday, September 16, 2010 9:54 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Columb
Greetings,
SRST to Unity Connection VM question. I put my site in SRST, Everything works
as expected except when I hit the message button to go to my VM box in UC. It
goes to the general UC message. Under my HQ gateway, I have Redirecting number
IE inbound and outbound checked. Am I missing
On your HQ GW (or whatever GW is used to reach the CUC) you need to check:
Redirecting Number IE Delivery - Inbound
Redirecting Number IE Delivery - Outbound
HTH,
Paul
On Thu, Sep 16, 2010 at 4:53 PM, ayman labib wrote:
> Greetings,
>
> SRST to Unity Connection VM question. I put my site in SR
You will need to add an alternate extension for the voicemail user in Unity
Connection of the expanded number as it comes in from the PSTN. If you are
globalizing numbers, you will need to use the full e164 number as your
alternate extension.
---
Amy Ryan CCIE #24677 (Voice)
Technical Instructo
Thanks for the reply,
I have already done that. I reset the gateway(HQ) and still no luck. Below is
my debug from the HQ router (CUC is located in HQ)
6178631002 --> User phone number in SRST
2123945020 --> CUC Pilot number
Sep 16 15:04:14.631: ISDN Se2/0:23 Q931: RX <- SETUP pd = 8 callref
What is the extension configured in CUC? 4 digits? If so, then it won't
work. Your number you have configured here in SRST is the full 10-dig
extension. You would have to add a redirecting voice translation-pattern to
match 4-digits to go out and hit the correct extension in CUC.
On Thu, Sep 16, 2
Thanks Amy,
My bad, this method always worked. I have it working right now with Alternate
Extension. I remember reading in previous posts few months ago that there's
another method to achieve this.
From: Amy Ryan
To: ayman labib ; ccie_voice@onlinestud
Thank you all, got it working. On my outgoing dial-peer I add Translation
profile byu accident to translate my number from 4 digits to 10 digits. Would
that be an acceptable solution, Real-life scenario and LAB?
Bearer Capability i = 0x8090A2
Standard = CCITT
Tr
I am planning to attend boot-camp from 8th to 12th Nov in Columbus.
From: "ccie_voice-requ...@onlinestudylist.com"
To: ccie_voice@onlinestudylist.com
Sent: Thu, September 16, 2010 11:09:19 AM
Subject: CCIE_Voice Digest, Vol 55, Issue 71
Note: Forwarded mes
Hi Vik & Ryan,
I am Narayan. This is my first posting on OSL. I am stuck in an config. I
configured an CME router everything is working properly. But the problem is
that when there is a missed call. I am not able to
call the missed call number directly. I have to use 9 then the number. Below i
Hi all,
You might want to practise to setup this without the use of alternate extension
in CUC, so that you also have experience with that way of configuration.
Just a friendly tip J
Roger Källberg
CCIE #26199 (Voice)
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
_
Hi Narayan
I think you are missing translation profile to add 9 infront of the ANI
coming from pstn...
The profile can be attached to either voice port or dial-peer used for incoming
calls in the incoming direction..with In translation profile calling number...
Prefix 9 for subscrber cal
Well done! Congrats..
Ash>
CCIE#26244 (Voice)
groganhockey wrote:
26966!
I'm not sure how often it'll come up in everyday life, but there it is.
I took the lab Monday in RTP and finally got my score report last
night.
IPExpert/Vik/Amy: Thank you for the excellent study guides,
walk
Thanks, everybody.
I'd just like to re-iterate my thanks to the IPExpert folks and the study
materials that they have put together. They really are top notch. Vik and
Amy's video walkthroughs in conjuction with the written Proctor Guides are
extremely thorough and clearly do a great job to prepare
Hi Khaled
You can use Extension Mobility.
2010/9/15 khaled Saholy
>
> Hi All,
>
> I have a question regarding the authentication. How to force the user to
> login to CUCM before being able to use the Cisco IP Phone? Is there is a way
> do it like creating IP Phone service ?
>
>
> Thanks in advan
Hi,
I think you need to apply calling Transforamtion to UC HP or simply to
Device Pool
On Thu, Sep 16, 2010 at 2:29 AM, Mike Hurley wrote:
> I have calling party transformations working on a phone so that a call is
> normalized on the phone’s display, but left in the global format in the
> miss
On Thu, Sep 16, 2010 at 15:54, Amp wrote:
> Hey Gang,
> Anyone out here planning on attending the upcoming boot camp in Columbus
I'll be in the room next-door :-)
--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
FREE CCIE training: http://bit.ly/vLecture
Mailto: mar...
Thanks Amr for the reply and I have already done that but will not ask the user
to enter username and password like windows.
For Extension mobility, it will help when the user needs to access his
extension from different phone. I mean for control sake who can access the
phone only the a
19 matches
Mail list logo
