Re: [OSL | CCIE_Voice] Unity Connection SIP integration to UCM

Ok, so figured it out... For some reason the "default" VM profile (none) didn't want to place nice.I had to set this manually on the line and now it properly forwards the call. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ryan Sc

Re: [OSL | CCIE_Voice] Unity Connection SIP integration to UCM

Thanks Sumit, It doesn't seem like a transcoder issue - I can call in to the pilot (directly, or with the voicemail button) on the BR1 phone no problems with g729. I've confirmed with port monitor that the call is not getting redirected to Unity at all. It seems like a "redirection" iss

[OSL | CCIE_Voice] Unity Connection SIP integration to UCM

I have UC integrated w/SIP to UCM. So far so good, my phones (HQ and BR1) can dial directly to the Voicemail route pattern and login to their mailbox. The problem is when BR1 phone calls HQ and vice versa and gets forwarded to voicemail.there is just a fast busy on the calling phone. Any id

[OSL | CCIE_Voice] Header Compression at L2 and L3.

Hi Guys,  I´m studing for CCIE written. I know that header compression works IP + UDP+ RTP headers. The cRTP can reduce the 40 bytes to  2 or  4 bytes depending if there is checksum or not. The form to calculate the bandwidth saved is: bw = (header L2 +  header L3 + header L4 + payload bytes) * 8

[OSL | CCIE_Voice] WB1 Lab 3A

Hey Drew, Mathew already got it but I wanted to share that I run a vm on my laptop so if I have to ever do this in the field, start up my VM, set it up on their LAN and point phones at it just for firmware changes like this, so much easier on CUCM. Hope this tip helps for those in the real world

Re: [OSL | CCIE_Voice] WB1 Lab 3A

Thanks guys, Registering to CUCM with auto reg worked. Thanks again for your time. Regards. *--* *Dew Swen * ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

Re: [OSL | CCIE_Voice] WB1 Lab 3A

The easiest way is to home that phone to CUCM, have CUCM set for SCCP auto-registration, let the firmware updated, then swing it back to CUCME. Matthew Berry Sr. Voice Engineer - CCIE 26721 [cid:DA4125F0-9AB2-4CB2-A16C-E5E2755B4790]

[OSL | CCIE_Voice] WB1 Lab 3A

Hey guys, I am in the middle of the session. BR2Ph1 has the SIP firmware loaded. I have to register it to BR2CME with SCCP firmware. How can change its firmware from SIP to SCCP. Because of it is a remote phone, I cannot change the TFTP IP address from the phone. Any comments? *--* *Dew Swen *

Re: [OSL | CCIE_Voice] Calling party transformation - Device pool wide

Thanks Randall / Miron, It was under Device Mobility Related Information , so confused. Also tried once. Finally worked after resetting the DP, then I slept. Now the day just started :-) More mistakes / M

Re: [OSL | CCIE_Voice] Calling party transformation - Device pool wide

Shrini, I was trying to give you a hint without giving you the actual answer. You almost had it yourself. On the CCIE journey, you have to learn a lot on your own. For example, if you want to know more about such setting, you could have stayed on the phone configuration page, then click on Help >

Re: [OSL | CCIE_Voice] Calling party transformation - Device pool wide

Randall, ;) Shrini, this i configured in Device Pool :) regards kobel On Wed, Nov 17, 2010 at 04:09, Shrini wrote: > > Under device setting there is a check box. So certainly there is place > where we set this. > > > > > On 11/16/2010 5:41 PM, Randall Saborio wrote: > > Hhhhmmm I wonder