Hi - Prob worth checking your cld party xfm setup on the h323 gateway to
ensure they are appending 011 to +.! - as these are usually set at gateway
level it is possible your br1 is configured differently which is why your
getting different results.
hth
On Wed, Feb 23, 2011 at 4:55 PM, CCIE
Are you using frts or mqc based shaping? I believe I saw this behaviour when
trying to use mqc based shaping.
- Reply message -
From: Ilya Rubinchik ilya.rubinc...@followmars.com
Date: Thu, Feb 24, 2011 12:16 am
Subject: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
To: Friderich
Yes, this is MQC.
As per lab requirements – class-based WAN marking and policing.
--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.
Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364
From: bkvalent...@gmail.com [mailto:bkvalent...@gmail.com]
Sent: Thursday,
Hi,
I have connected two routers Back-to-Back using the E1 Cross over cable,
but I am unable to get the Multiple_Frame_Established.
I see on one of the side as slips are increasing, I tried to change the
Clock source to Internal.
E1 0/1/0 is up.
Applique type is Channelized E1 - balanced
Paste your E1 configurations.
Be sure that you use the correct pin assignment (12 and 45)
Best regards,
Tamer Ismail
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Vinay Kumar6
Sent: Thursday, February 24, 2011 6:34 PM
To:
Please post appropriate parts of your config, that makes it so much easier to
help you ;)
** Sent from my iPhone. Excuse brevity and typographical errors. **
24 feb 2011 kl. 19:20 skrev
ccie_voice-requ...@onlinestudylist.commailto:ccie_voice-requ...@onlinestudylist.com
Do show network on both and paste output.
- Reply message -
From: Vinay Kumar6 vinayjaisw...@in.ibm.com
Date: Thu, Feb 24, 2011 11:34 am
Subject: [OSL | CCIE_Voice] Slips on E1
To: ccie_voice-boun...@onlinestudylist.com, ccie_voice@onlinestudylist.com
Hi,
I have connected two routers
Let's see the configs. It could be your cable.
On Thu, Feb 24, 2011 at 10:34 AM, Vinay Kumar6 vinayjaisw...@in.ibm.comwrote:
Hi,
I have connected two routers Back-to-Back using the E1 Cross over cable,
but I am unable to get the *Multiple_Frame_Established.*
I see on one of the side as
Just wondering if anyone felt creating some alias commands in the lab
helped them.
Best Regards,
Randall Crumm
Voice and Video Architect
Global Networking Telecom
1007 Gibraltar Drive
Milpitas, CA 95035
Direct +1 408.576.7344
VoIP .100.7344
Creating value that
part --
An HTML attachment was scrubbed...
URL:
/archives/ccie_voice/attachments/20110224/6c276441/attachment-0001.html
--
___
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com
Hi Vinay,
I faced the same issue exactly and had same increasing slip errors.
Kindly make one side as ISDN network as te default setting is ISDN user
side.
Use below command :
Int s0/0/0:15
isdn emulate-protocol network
Regards,
Wael Agina
2011/2/24 Roger Källberg
I never did. I can see using alias commands for long-term engagements.
However, for eight hours it seems a bit overkill. To each his own.
How much longer does it take to type sho ip int bri than to type so alias
command like ipb
A few milliseconds?
If you're that concerned about timing,
Hi,
If a question were asked during the lab exam that says to allow or block calls
during a certain period of time, for example, block calls at lunch from 12-1
pm. Does this mean we allow calls at 13:01 or starting at 13:00? Has there
been any feedback about a question like this on how we
12:00 12:59 = 12:00:00 - 12:59:59
12:00 13:00 = 12:00:00 - 13:00:59
There's a minute difference.
Matthew Berry, CCIE #26721
Email: matt...@ciscovoiceguru.com
Twitter: http://twitter.com/CiscoVoiceGuru
Blog: http://ciscovoiceguru.com
On Feb 24, 2011, at 3:47 PM, CCIE for Me wrote:
Hi,
I’m often use shcal for show call active voice brief command.
shvrp for sh voip rtp connections
--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.
Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364
From: ccie_voice-boun...@onlinestudylist.com
Thanks Wael,
It resolved the issue :)
Warm Regards,
Vinay Kumar
From:
Wael Agina waelag...@gmail.com
To:
Roger Källberg roger.kallb...@cygate.se
Cc:
ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Date:
02/25/2011 02:57 AM
Subject:
Re: [OSL | CCIE_Voice] Slips on E1
Hi
Hello all,
I'm very sorry if I'm disturbing you but for some reason I feel nobody
receives my posts.
Does anyone read this?
Thanks a lot!
Daniel G.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
17 matches
Mail list logo
